Mercedes-Benz ML320. Manual — part 373
SM72.10-P-0004A
Modify front door
6.5.03
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
P72.10-2740-06
1
Side airbag
2
Mounting holes
3
Location hole
4
Locating tab
Operation no. of the operation texts or standard texts and flat rates
Range
Op. no.
Operation text
Flat rate
Acc. no.
Code
P
721680
Additional work to 1st door Location:. replace transfer with
components: Drill hole for side airbag
003 WU/0.3 h
---
---
1
Place side airbag (1) into position on door
Use mounting holes (2) to align properly.
2
Mark center of locating tab (4)
3
Remove side airbag
4
Drill
4
=10.5 mm hole (3) in door sheet metal
at center location
Ensure window glass will not be damaged
by drilling.
5
Smooth rough edges of hole
6
Clean, prime, and paint hole
7
Remove metal chips from bottom of door
Parts ordering notes
Part no.
Designation
Quantity
000 986 06 50
Priming stick
1
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR72.12-P-1010GH
Remove/install rear door liner
18.2.97
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
P72.12-2061-09
1
Door handle cover
2
Bolt
3
Door liner
7
Assembly wedge
8
Entrance lamp
9
Bolt
4
Bowden cable
5
Inner lock
6
Clips
Remove/install
1
Open crank window
2
Remove cover for door handle (1)
3
Unscrew screw (2)
4.1
Unclip SRS panel and unscrew screw (9)
As of vehicle identification number
A145273, X708319.
5
Press door liner (3) off of bottom, front and
rear inner door panel with assembly wedge (7)
Position assembly wedge directly next to
clips
Assembly wedge
*110589035900
6
Lift door liner (3) up and out
7
Unhook control cable (4) on inner door
actuating mechanism
8
Unclip inner lock (5) on door liner (3)
9.1
Remove entrance lamp (8)
As of vehicle identification number
A145273, X708319.
10
Lay down door liner
11
Check foil and sheet metal clip nuts on inner
door panel
Replace damaged foil. Replace all clips.
12
Install in the reverse order
Assembly wedge
110 589 03 59 00
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR68.30-P-4100GI
Remove/install door sill molding
20.4.01
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
Door sill molding in cargo space
P68.30-2393-11
1
Caps
2
Door sill molding
Remove/install
1
Remove cover caps (1)
Do not scratch door sill molding.
2
Remove screws below caps
3
Remove door sill molding (2)
Installation: Ensure that sealing rubber is
positioned correctly.
4.1
Disconnect connector from electronic compass
Only as of 01.09.00 and with code (245),
trip computer.
5
Install in the reverse order
Copyright DaimlerChrysler AG 17.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR68.30-P-4100GI
Remove/install door sill molding
20.4.01
MODEL
163.113 /128 /136 /154 /157 /172 /174 /175
Door sill molding in cargo space
P68.30-2393-11
1
Caps
2
Door sill molding
Remove/install
1
Remove cover caps (1)
Do not scratch door sill molding.
2
Remove screws below caps
3
Remove door sill molding (2)
Installation: Ensure that sealing rubber is
positioned correctly.
4.1
Disconnect connector from electronic compass
Only as of 01.09.00 and with code (245),
trip computer.
5
Install in the reverse order
Copyright DaimlerChrysler AG 17.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст