Mercedes-Benz ML320. Manual — part 743

GF77.20-P-0001-01GH

Electric sliding/pop-up roof (SR), location of
components

P77.20-0380-06

M12

Sliding /pop-up roof drive assembly

S13/2

Sliding /pop-up roof switch

Copyright DaimlerChrysler AG 04.08.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.

Page 1

AR68.20-P-4810GH

Removing and installing luggage compartment floor covering

28.2.97

MODEL

163.113 /128 /136 /154 /157 /172 /174 /175

P68.20-0456-06

1

Belt end fitting for third seat row

2

Cargo retainers

3

Floor mat

Remove/install

Torx bit set

*000589011000

1.1

Remove inner spare wheel together with cover Only model 163.174.

AR68.30-P-4610GH

2.1

Fold third seat row upward

Only with 3rd seat row, code 847.

See owner's manual

3

Remove load compartment floor flaps

See owner's manual

4.1

Remove seat belt end fitting for third seat row
(1)

Only with 3rd seat row, code 847.

*BA91.40-P-1001-01D

5

Unscrew screws for load retainer (2)

*BA68.50-P-1001-02A

6.1

Remove mount for child seat retainer

If installed

*BA91.20-P-1001-01A

7

Remove cover for rear edge of load
compartment

Do not scratch cover when removing caps.

Installation: Properly install seal on rear-

end door.

8

Remove floor covering (3) to rear

Installation: Install floor covering below

side paneling.

Assembly wedge

*110589035900

9

Install in the reverse order

Safety belts/emergency tensioning retractors

Number

Designation

Model 163 up to
08/99

Model 163 as of
09/99

BA91.40-P-1001-01D

Belt end fitting screw

Nm

35

35

Luggage nets

Copyright DaimlerChrysler AG 14.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.

Page 1

Number

Designation

Model
Series 163

BA68.50-P-1001-02A

Bolt securing cargo retainer bracket to loading
compartment floor

Nm

24

Child seats

Number

Designation

Model
Series 163

BA91.20-P-1001-01A

Bracket for child seat anchorage on load
compartment floor

Nm

24

000 589 01 10 00

Torx bit set

Assembly wedge

110 589 03 59 00

Copyright DaimlerChrysler AG 14.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.

Page 2

BT27.40-P-0003-01A

Magnet in oil pan, new part

TRANSMISSION 722.6## ## as of 2871384 as of 17.4.01,
722.7## ## as of 0153700 as of 9.7.01

P27.40-2027-01

To avoid malfunctions from metal particles, a magnet is placed in the oil pan.

The magnet can be retrofitted in the field.

Copyright DaimlerChrysler AG 28.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.

Page 1