Mercedes-Benz ML320. Manual — part 333
163 869 00 14
Clip
1
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
AR61.20-P-1105GH
Remove/install bottom engine compartment paneling
22.6.00
MODEL
163.172 with ENGINE 113.942
MODEL
163.174 with ENGINE 113.981
MODEL
163.175 with ENGINE 113.965
P61.20-2017-12
1
Engine compartment paneling
2
Grub screw
3
Plastic clips
Remove/Install
1
Remove grub screws (2) of plastic clips (3)
6 grub screws pins.
Installation: Check grub screws, replace
if necessary.
2
Pull out plastic clips (3)
Installation: Check plastic clips, replace
if necessary.
3
Remove engine compartment panel (1)
Installation: Ensure that engine
compartment panel is positioned correctly.
4
Install in the reverse order
Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR88.30-P-2000-01GI
Remove brush guard
Detachable body components, underride guard
Number
Designation
Model
163
as of
1.9.01
BA88.30-P-1003-01A
Screw of mount on brush guard
Nm
25
BA88.30-P-1015-01A
Nut of underride guard to bracket
Nm
49
BA88.30-P-1016-01A
Bolt of front section of underride guard to rear
section of underride guard
Nm
49
P88.30-2153-06
1.1
Remove screws (1) and nuts (2) of
underride guard (3) on bottom side of
vehicle
.
Only if available.
2
Remove screws (4) of bracket on brush
guard
.
3
Remove screws (6) of bracket on brush
guard behind grommets (7).
.
4
Remove brush guard (8).
Do not damage paintwork.
Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR88.30-P-2000-01GH
Remove brush guard
Modification notes
10.8.01
Value modified from 25 Nm to 49 Nm
Value modified in BA88.30-P-1003-01A for
model 163 up to 31.8.01
*BA88.30-P-1003-01A
Detachable body components, underride guard
Number
Designation
Model 163
up to
31.8.01
BA88.30-P-1002-01A
Nut, spacer tube on brush guard
Nm
86
BA88.30-P-1003-01A
Screw, mount on brush guard
Nm
49
BA88.30-P-1011-01A
Bolt, underride guard to brush guard
Nm
25
BA88.30-P-1015-01A
Nut, underride guard to bracket
Nm
49
BA88.30-P-1016-01A
Bolt, front section of underride guard to rear
section of underride guard
Nm
49
P88.30-2150-06
1.1
Remove screws (1) and nuts (2) from
underride guard (3) at bottom of vehicle
.
Only if available.
2
Remove screw for brush guard (4) from
inner mount at bottom (5)
3
Remove nut for spacer tube (6)
4
Remove spacer sleeve (7) from spacer
tube nut (6).
5
Remove brush guard (8) toward front.
Carefully move out brush guard so that
paint is not damaged.
Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст