Mercedes-Benz ML320. Manual — part 728
Fig. 17: Identifying Center Air Nozzle
Fig. 18: Identifying Long Wedge (115 589 03 59 00)
REMOVING AND INSTALLING GLOVE COMPARTMENT LID - AR68.10-P-1200GH
MODEL 163.136 /154 /172 up to 31.8.99
Remove/install
1
Pry center air nozzle (1) at bottom out of catch
(arrows)
Installation: air nozzle should catch
audibly.
Long wedge
Fig.
6
2
Pry center air nozzle (1) at top out of catch
(arrows)
Installation: air nozzle should catch
audibly.
Long wedge
Fig.
6
3
Pull center air nozzle (1) out of air duct
4
Install in the reverse order
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Fig. 19: Identifying Glove Compartment Lid, Screw & Stop Lever
DISASSEMBLING AND ASSEMBLING GLOVE COMPARTMENT LID - AR68.10-P-1220GH
MODEL 163.136 /154 /172 up to 31.8.99
Removal, installation
1
Remove glove compartment
Installation: Adjust glove compartment
lid and check for proper function
AR68.10-P-
1400GH
2
Unhook stop lever (1) on left and
right on instrument panel
Slightly lift glove compartment lid (3)
and unhook stop lever (1).
3
Unscrew screws (2) on hinge
4
Remove glove compartment lid (3)
5
Reinstall in opposite order
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Fig. 20: Identifying Glove Compartment Lid Components
ADJUST GLOVE COMPARTMENT LID - AR68.10-P-1300GH
MODEL 163.136 /154 /172 #A up to 145272
Disassembly, assembly
1
Remove glove compartment lid
AR68.10-P-
1200GH
2
Unclip stop lever (1) from inner section
(2)
3
Remove hinges (8) on inner section (2)
Remove hinge pins
4
Unscrew screws (3) from lock (4)
5
Unscrew screws (5) from glove
compartment inner section (2)
5 each.
6
Remove inner section (2)
7
Remove insert (6) from inner section (2)
8
Unhook glove compartment catch (4)
and spring (9)
9
Remove glove compartment catch (4)
from glove compartment lid (7)
Drive out pin (10).
Installation: Observe installation
position for spring (9).
10
Install in opposite order
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Fig. 21: Identifying Glove Compartment Lid Adjustments
REMOVE/INSTALL GLOVE COMPARTMENT - AR68.10-P-1400GH
MODEL 163.136 /154 /172 #A up to 145272
Adjusting
During entire operation pay attention to uniform
transition, gap and adjustment possibilities on
hinge (arrows) between glove compartment lid
(1) and instrument panel (2).
1 Loosen screws (3) on striker eye (4)
Installation: Adjust transition at
top of striker eye (4). Glove
compartment lid (1) should make slight
contact to stop buffers.
2 Remove glove compartment
AR68.10-P-
1400GH
3 Adjust gap
For this purpose loosen hinge screw
(5) from hinge (6).
4 Install glove compartment
AR68.10-P-
1400GH
5 Check for easy motion and proper function
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Interior Equipment - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст