Mercedes-Benz ML320. Manual — part 637
AR68.10-P-1300GH
Adjust glove compartment lid
4.2.97
MODEL
163.136 /154 /172 #A up to 145272
P68.10-0517-06
1
Glove compartment lid
2
Instrument panel
3
Screws
4
Striker eye
5
Hinge screw
6
Hinge
Arrows
Air gap and adjustment possibilities
on hinge
Adjusting
During entire operation pay attention to
uniform transition, gap and adjustment
possibilities on hinge (arrows) between glove
compartment lid (1) and instrument panel (2).
1
Loosen screws (3) on striker eye (4)
Installation: Adjust transition at top of
striker eye (4).Glove compartment lid (1)
should make slight contact to stop buffers.
2
Remove glove compartment
AR68.10-P-1400GH
3
Adjust gap
For this purpose loosen hinge screw (5)
from hinge (6).
4
Install glove compartment
AR68.10-P-1400GH
5
Check for easy motion and proper function
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR68.10-P-1300GH
Adjust glove compartment lid
4.2.97
MODEL
163.136 /154 /172 #A up to 145272
P68.10-0517-06
1
Glove compartment lid
2
Instrument panel
3
Screws
4
Striker eye
5
Hinge screw
6
Hinge
Arrows
Air gap and adjustment possibilities
on hinge
Adjusting
During entire operation pay attention to
uniform transition, gap and adjustment
possibilities on hinge (arrows) between glove
compartment lid (1) and instrument panel (2).
1
Loosen screws (3) on striker eye (4)
Installation: Adjust transition at top of
striker eye (4).Glove compartment lid (1)
should make slight contact to stop buffers.
2
Remove glove compartment
AR68.10-P-1400GH
3
Adjust gap
For this purpose loosen hinge screw (5)
from hinge (6).
4
Install glove compartment
AR68.10-P-1400GH
5
Check for easy motion and proper function
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR68.10-P-1400GH
Remove/install glove compartment
4.2.97
MODEL
163.136 /154 /172 #A up to 145272
P68.10-0515-05
1
Striker eye
2-7
Screws
8-9
Stop buffer
10
Glove compartment
E13/1
Glove compartment lamp
Remove/Install
1
Open glove compartment lid
2
Unclip glove compartment lamp (E13/1) and
disconnect connector
3
Remove striker eye (1)
Installation: Check adjustment.Refer to:
#
Adjust glove compartment lid.
AR68.10-P-1300GH
4
Unscrew screws (2-7)
5
Pry glove compartment (10) out of arrest at
bottom and pull out
6
Install in the reverse order
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR68.10-P-1220GH
Disassembling and assembling glove compartment lid
4.2.97
MODEL
163.136 /154 /172 up to 31.8.99
P68.10-0518-06
1
Stop lever
2
Inner section
3
Screw for catch
4
Glove compartment catch
5
Screw for inner section
6
Insert
7
Glove compartment lid
8
Hinge
9
Spring for catch
10
Pin for catch
Disassembly, assembly
1
Remove glove compartment lid
AR68.10-P-1200GH
2
Unclip stop lever (1) from inner section (2)
3
Remove hinges (8) on inner section (2)
Remove hinge pins
4
Unscrew screws (3) from lock (4)
5
Unscrew screws (5) from glove compartment
inner section (2)
5 each.
6
Remove inner section (2)
7
Remove insert (6) from inner section (2)
8
Unhook glove compartment catch (4) and
spring (9)
9
Remove glove compartment catch (4) from
glove compartment lid (7)
Drive out pin (10).
Installation: Observe installation position for
spring (9).
10
Install in opposite order
Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст