Mercedes-Benz ML320. Manual — part 260
LOSS OF SOUND IN COMAND SYSTEM AND/OR TELEPHONE NOT FUNCTIONING - AF82.70-P-1090A
MODEL 163, 203, 208, 209, 210, 215, 220, 230, 463 with CODE (853) MB standard cellular telephone
Nokia 6091
Parts ordering notes
PORTABLE CTEL CANNOT BE OPERATED OVER STEERING WHEEL OR COMAND/RADIO - AF82.70-P-6090A
Network is overloaded
The telephone
system has been
checked technically
Do not remove/install/replace
any parts. It is not necessary to
replace the telephone control
module due to call interruptions.
1 Ask network provider about
traffic at point in question.
If the customer uses a twin
card it is necessary to switch off
the additionally (externally)
operated cellular telephone
before the vehicle's telephone
system is switched on.
Damage code
Cause
Remedy
Fixed installation telephone
control unit.
1 Read out series number.
Cyclical loss of sound in
COMAND system for 2 - 3
seconds (Nokia 6091).
Telephone temporarily not
functioning.
via the receiver using the
key combination: *#06#
The series number can also be
found on the sticker on the
control unit.
Concerns fixed
installation control unit part
no. A 203 820 70 26. When
reading out with STAR
DIAGNOSIS (quick test)
part no. 000 000 00 00
appears with these control
units.
If the affected series number
is installed: ?
Affected Nokia series
numbers:
from 350109/20/038841/6
up to 350109/20/047721/9
2 Remove/install/replace fixed
installation telephone control
unit.
Part no.
Designation
Quantity
A 203 820 70 26
Fixed installation telephone
control unit
As required
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
MODEL 129, 163, 168, 170, 202, 203, 208, 210, 211, 215, 220 with CODE (380) Preinstallation for MB
phone "CTEL", complete with CODE (382) MB phone "CTEL" in console on right side of dome with
CODE (852) CTEL preinstallation assembly at dome with CODE (854) MB portable cellular telephone
with Nokia 6210
Modification notes
12.3.02
Supersedes STIP 82.70-
035 dated 14.08.2001
Validity and content
updated
Damage code
Cause
Remedy
Nokia 6210 cannot be
operated with current
interface
Operation of Nokia
6210 possible with new
interface. Modified
interface available.
Nokia 6210 portable
CTEL software version
4.36 or higher required
For model 211 the
portable CTEL SW
version 5.2 is required.
1 Read out Nokia 6210
portable CTEL software
version
2 Enter *#0000# on
Nokia 6210 portable
CTEL.
If an older version is
installed the portable
CTEL must be updated in
a Nokia shop.
If the customer has stored
data in the portable CTEL
telephone, it is necessary
to secure this in the
Nokia shop before
updating.
3 Remove and install,
replace interface.
MODEL 203.0 with
CODE (854) MB
portable CTEL
AR82.70-P-7379EE
MODEL 215, 220 up to
30.6.00 with CODE (317)
D-network portable
CTEL (D2B)
AR82.70-P-8920I
MODEL 210.0 as of
AR82.70-P-7379FB
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Parts ordering notes
1.7.00 with CODE (854)
MB portable CTEL
MODEL 208.3 as of
1.7.00 with CODE (854)
MB portable CTEL
AR82.70-P-7379EA
Insert interference
suppression converter
between compensator
(A28/3) outlet in
direction of portable
CTEL holder.
Installation location
for compensator: ?
MODEL 203.0 with
CODE (854) MB
portable CTEL
AR82.70-P-0010A
MODEL 208.3 as of
1.7.00 with CODE (854)
MB portable CTEL
AR82.70-P-0010AC
MODEL 210.0 with
CODE (854) MB
portable CTEL
AR82.70-P-0010B
MODEL 210.2 with
CODE (854) MB
portable CTEL
AR82.70-P-0010C
MODEL 215 as of 1.7.00
with CODE (854) MB
portable CTEL
AR82.70-P-0010AD
MODEL 220 as of 1.7.00
with CODE (854) MB
portable CTEL
AR82.70-P-0010AE
Return removed
interface (203 820 32 26)
with index ES1 0070 to
appropriate ELCs with
return slip.
To ensure supply of
replacement parts we
request you to send in the
removed interface
immediately.
Part no.
Designation
Quantity
203 820 51 85
Interface
As required
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
COMAND OPERATING AND DISPLAY SYSTEM SCREEN REMAINS DARK AFTER STARTING ENGINE - AF82.85-P-
2001A
MODEL 163, 203, 208, 210, 215, 220, 230, 463 with CODE (352) COMAND operating and display system
NAVIGATION SYSTEM DISPLAYS INCORRECT ADDRESS - AF82.85-P-2100A
MODEL 163.154 /174 #A as of 289565, 163.157/175 with CODE (357) Navigation system - additional unit
with CODE (494a) USA version
Mainland USA only,
DVD version 2002-2 only
Operation no. of the operation texts or standard texts and flat rates
203 820 07 51
Clip for portable CTEL mount
As required
203 820 52 15
Interference suppression converter As required
Damage code
Cause
Remedy
Current vehicle voltage.
Do not remove/install
COMAND.
1. Point out to customer
that in the event of
problems the fault can
be eliminated by
switching off/on
(ON/OFF button) the
COMAND.
Range
Op. no.
Operation text
Flat rate
Acc. no.
Code
P
023917
Flash Navigation
system
0.3 h
82 853 90
-
Damage code
Cause
Remedy
Database mismatch.
1 Start engine.
2 Turn on MCS unit.
3 Press NAVI MENU
button.
4 Ensure MAP REGION
is set to MAINLAND US
under SYSTEM SETUP
menu.
5 Eject customer
Navigation DVD.
2001 Mercedes-Benz ML320
1998-2005 ACCESSORIES & BODY, CAB Electrical System - Body - 163 Chassis
me
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст