Mersedes Maybach S-Class. Service Manual — part 16
Route guidance active
No change of direction announced
:
Distance to the next destination
;
Estimated arrival time
=
Distance to the next change of direction
?
Current road
Change of direction announced with a
lane recommendation
:
Road into which the change of direction
leads
;
Distance to the change of direction
=
Change-of-direction symbol
?
Lane not recommended (dark gray)
A
Possible lane (light gray)
B
Recommended lane and new lane during a
change of direction (white)
On multilane roads, new lane recommendations
can be displayed for the next change of direction
if the digital map supports this data. During the
change of direction, new lanes may be added.
Lane not recommended ?: you will not be able
to complete the next change of direction if you
stay in this lane.
Possible lane A: you will only be able to com-
plete the next change of direction in this lane.
Recommended lane B: in this lane you will be
able to complete the next change of direction
and the one after that.
Change of direction without lane recom-
mendation
:
Road into which the change of direction
leads
;
Distance to change of direction and visual
distance display
=
Change-of-direction symbol
When a change of direction is to be made, you
will see symbol = for the change of direction
and distance graphic ;. The distance indicator
shortens towards the top of the display as you
approach the point of the announced change of
direction. The change of direction starts once
the distance display reaches zero.
Change of direction with lane recommen-
dation
:
Road into which the change of direction
leads
;
Distance to change of direction and visual
distance display
=
Change-of-direction symbol
?
Lane recommendation
264
Menus and submenus
On-b
oard
co
mpute
rand
di
spl
ays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Other status indicators of the naviga-
tion system
:
Additional information
Other possible additional information:
R
New Route...
or
Calculating Route...
A new route is calculated.
R
Road Not Mapped
The vehicle position is inside the area of the
digital map but the road is not recognized, e.g.
newly built streets, car parks or private land.
R
No Route
No route could be calculated to the selected
destination.
R
O
You have reached the destination or an inter-
mediate destination.
Radio menu
:
Frequency range
;
Station frequency with memory position
=
Name of artist
?
Name of track
A
Genre
The multifunction display shows station ; with
station frequency or station name. The preset
position is only displayed along with station ; if
this has been stored. You can store radio sta-
tions in the multimedia system.
X
Switch on the multimedia system (see sepa-
rate operating instructions).
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Radio
menu.
X
Confirm by pressing a on the steering
wheel.
Currently set station ; appears in the multi-
function display.
X
To open the station list: press the : or
9 button briefly.
X
To select a station in the station list: press
the : or 9 button briefly.
X
To select a station in the station list using
rapid scrolling: press and hold the : or
9 button.
X
To select the frequency range or station
memory: press a briefly.
X
Press : or 9 to select the frequency
range or station memory.
X
Press a to confirm the selection.
i
SIRIUS XM satellite radio functions like a
normal radio.
Further information on radio operation can be
found in the multimedia system (see the sep-
arate operating instructions).
Media menu
Changing the media source
Menus and submenus
265
On-board
com
pu
ter
and
displays
Z
-------------------------------------------------------------------------------------------------------------------------------------------------------------
You can change the media source and playback
mode (audio, video or TV) at any time in the
Media
menu.
X
Switch on the multimedia system (see sepa-
rate operating instructions).
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Media
menu.
X
Confirm by pressing a on the steering
wheel.
X
To open/close the media sources list:
press a briefly.
The list shows the following media sources,
for example:
R
Disc (CD/DVD)
R
SD memory card
R
Media Register
R
USB storage device
R
Bluetooth
®
capable audio device
Please observe further information on media
support and media operation in the multimedia
system (see separate operating instructions).
Operating an audio player or audio
media
:
Media source, e.g. name of current CD
;
Current title
=
Name of artist
?
Name of album
A
Folder name
Audio data from various audio devices or media
can be played, depending on the equipment
installed in the vehicle.
X
Switch on the multimedia system (see sepa-
rate operating instructions).
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Media
menu.
X
Confirm by pressing a on the steering
wheel.
X
To select an audio player or data carrier:
press a briefly.
The list containing the media sources
appears.
X
Press : or 9 to select the correspond-
ing audio player or media.
X
Press a to confirm the selection.
X
To open the track list: press the : or
9 button briefly.
X
To select the next or previous track in the
track list: press the : or 9 button
briefly.
X
To select a track from the track list using
rapid scrolling: press and hold : or 9
until the desired track is reached.
If you press and hold the button, the speed of
rapid scroll increases after a short time. Not
all audio drives or data carriers support this
function.
If the corresponding track information is stored
on the audio drive or audio media, the multi-
function display may display the following:
R
track number
R
track name
R
artist
R
album
The track information is not available in audio
AUX mode (Auxiliary audio mode: external
audio source connected).
266
Menus and submenus
On-boar
d
com
puter
and
displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Video DVD operation
X
Switch on the multimedia system (see sepa-
rate operating instructions).
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Media
menu.
X
Confirm by pressing a on the steering
wheel.
X
To select a DVD single drive or DVD media:
press a briefly.
The list containing the media sources
appears.
X
Press : or 9 to select the correspond-
ing DVD single drive or disc.
X
Press a to confirm the selection.
X
To open the scene list: press the : or
9 button briefly.
X
To select the next or previous scene in the
scene list: press the : or 9 button
briefly.
X
To select a scene from the scene list using
rapid scrolling: press and hold : or 9
until desired scene : is reached.
X
Press a to confirm the selection.
Telephone menu
Introduction
G
WARNING
If you operate information systems and com-
munication equipment integrated in the vehi-
cle while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is a risk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
When telephoning, you must observe the legal
requirements for the country in which you are
currently driving.
X
Switch on the mobile phone (see the manu-
facturer’s operating instructions).
X
Switch on the multimedia system (see sepa-
rate operating instructions).
X
Establish a Bluetooth
®
connection to the mul-
timedia system; see the separate operating
instructions.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Telephone
menu.
X
Confirm by pressing a on the steering
wheel.
You will see one of the following display mes-
sages in the multifunction display:
R
Phone READY
or the name of the network
provider: the mobile phone has found a net-
work and is ready to receive.
R
Phone No Service
: there is no network
available or the mobile phone is searching for
a network.
Accepting a call
If someone calls you when you are in the
Tele‐
phone
menu, a display message appears in the
multifunction display.
You can accept a call at any time regardless of
the menu selected.
Menus and submenus
267
On-board
co
mpute
rand
di
spl
ay
s
Z
-------------------------------------------------------------------------------------------------------------------------------------------------------------
X
Press the 6 button on the steering wheel
to accept an incoming call.
Rejecting or ending a call
X
Press the ~ button on the steering wheel
to reject or end a call.
Selecting an entry in the phone book
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Telephone
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press the :, 9 or a button to
switch to the phone book.
X
Press : or 9 to select the names one
after the other.
or
X
To start rapid scrolling: press and hold
the : or 9 button for longer than one
second.
The names in the phone book are displayed
quickly one after the other.
If you press and hold the : or 9 button
for longer than five seconds, the name
appears with the next or previous letter initial
letter in the alphabet.
Rapid scrolling stops when you release the
button or reach the end of the list.
X
If only one telephone number is stored for
a name: press the 6 or a button to
start dialing.
or
X
If there is more than one telephone num-
ber for a particular name: press the 6 or
a button to display the numbers.
X
Press : or 9 to select the number you
want to dial.
X
Press the 6 or a button to start dialing.
or
X
To exit the telephone book: press the ~
or % button.
Redialing
The on-board computer saves the last names or
numbers dialed in the redial memory.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Telephone
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press the 6 button to switch to the redial
memory.
X
Press the : or 9 button to select the
desired name or number.
X
Press the 6 or a button to start dialing.
or
X
To exit the redial memory: press the ~
or % button.
Assistance graphic menu
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Assistance Graphic
menu.
X
Confirm by pressing a on the steering
wheel.
The multifunction display shows the
DISTRONIC PLUS distance display in the
assistance graphic.
The assistance graphic shows you the status
of and/or information from other driving sys-
tems or driving safety systems:
R
DISTRONIC PLUS (
Y
page 199)
R
Spotlight function of Night View Assist Plus
(
Y
page 274)
268
Menus and submenus
On-board
computer
and
displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
R
Distance warning and the autonomous
braking function COLLISION PREVENTION
ASSIST PLUS (
Y
page 71)
R
PRE-SAFE
®
Brake (
Y
page 75)
R
Active Blind Spot Assist (
Y
page 234)
R
ATTENTION ASSIST (
Y
page 228)
R
Active Lane Keeping Assist (
Y
page 237)
X
Press : to display the ATTENTION ASSIST
assessment.
Service menu
Introduction
Depending on the equipment installed in the
vehicle, you have the following options in the
Service
menu:
R
Calling up display messages in message
memory (
Y
page 277)
R
Restarting the tire pressure loss warning sys-
tem (
Y
page 394)
R
Checking the tire pressure electronically
(
Y
page 390)
R
Calling up the service due date (
Y
page 358).
R
Displaying the coolant temperature (PLUG-IN
HYBRID vehicles) (
Y
page 269)
R
Checking the oil level using the on-board com-
puter (
Y
page 355) (only S 600, Mercedes-
Maybach S 600 and Mercedes-AMG S 65
models)
Displaying the coolant temperature
The
Coolant
menu is only available on PLUG‑IN
HYBRID vehicles.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Service
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button to select
Coolant
.
X
Press a to confirm the selection.
The multifunction display shows the coolant
temperature in a bar display.
Settings menu
Introduction
Depending on the equipment installed in the
vehicle, you have the following options in the
Settings
menu:
R
Changing assistance settings (
Y
page 269)
R
Changing HYBRID settings (PLUG-IN HYBRID
vehicles) (
Y
page 272)
R
Changing head-up display settings
(
Y
page 273)
R
Changing the light settings (
Y
page 274)
R
Changing the instrument cluster settings
(
Y
page 274)
R
Restoring the factory settings (
Y
page 275)
Assistance submenu
Deactivating/activating ESP
®
Observe the "Important safety notes" section in
the description of ESP
®
(
Y
page 73).
Menus and submenus
269
O
n-b
oard
co
mpute
ran
d
di
spl
ay
s
Z
-------------------------------------------------------------------------------------------------------------------------------------------------------------
G
WARNING
If you deactivate ESP
®
, ESP
®
no longer sta-
bilizes the vehicle. There is an increased risk
of skidding and an accident.
Only deactivate ESP
®
in the situations descri-
bed in the following.
It may be best to deactivate ESP
®
in the follow-
ing situations:
R
when using snow chains
R
in deep snow
R
on sand or gravel
For further information about ESP
®
, see
(
Y
page 73).
X
Start the engine.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the
DriveAssist
submenu.
X
Press a to confirm your selection.
X
Press the : or 9 button to select
ESP
.
X
Press a to confirm.
The current selection appears.
X
To activate/deactivate: press the a but-
ton again.
ESP
®
is deactivated if the å warning lamp in
the instrument cluster lights up continuously
when the engine is running.
If the ÷ warning lamp lights up continuously,
ESP
®
is not available due to a malfunction.
Observe the information on warning lamps
(
Y
page 317).
Observe the information on display messages
(
Y
page 278).
Automatic activation of Night View Assist
Plus
X
Press ò on the steering wheel to open the
menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the
DriveAssist
submenu.
X
Press a to confirm your selection.
X
Press the : or 9 button to select
Night View Assist
.
X
Press a to confirm.
The current selection appears.
X
To activate/deactivate: press the a but-
ton again.
If Night View Assist Plus automatic activation is
switched on, the night vision image is automat-
ically shown in the multifunction display if an
object is detected.
For further information about Night View Assist
Plus (
Y
page 232).
Activating/deactivating Traffic Sign
Assist
Under certain conditions, the
Traffic Sign
Assist
function allows you to choose if traffic
signs and messages should be displayed in the
lower part of the speedometer.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the
DriveAssist
submenu.
X
Press a to confirm your selection.
X
Press the : or 9 button to select
Traffic Sign Assist
.
X
Press a to confirm.
The current selection appears.
X
To activate/deactivate: press the a but-
ton again.
Traffic signs and messages appear in the
lower part of the speedometer if the function
is activated.
For further information about Traffic Sign Assist,
see (
Y
page 229).
Activating/deactivating COLLISION PRE-
VENTION ASSIST PLUS
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
270
Menus and submenus
On-board
comput
er
and
displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the
DriveAssist
submenu.
X
Press a to confirm your selection.
X
Press the 9 or : button to select
Col‐
lision Prevention
.
X
Press a to confirm.
The current selection appears.
X
To activate/deactivate: press a again.
When COLLISION PREVENTION ASSIST PLUS is
deactivated, the æ symbol appears in the
multifunction display in the
Assistance
Graphic
menu.
For further information about COLLISION PRE-
VENTION ASSIST PLUS, see (
Y
page 71).
Activating/deactivating PRE-SAFE
®
Brake
PRE‑SAFE
®
Brake is only available for vehicles
with the Driving Assistance Plus package.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the
DriveAssist
submenu.
X
Press a to confirm your selection.
X
Press the : or 9 button to select
PRE-
SAFE Brake
.
X
Press a to confirm.
The current selection appears.
X
To activate/deactivate: press the a but-
ton again.
When PRE-SAFE
®
Brake is deactivated, the
æ symbol appears in the multifunction dis-
play in the
Assistance Graphic
menu.
For more information on PRE‑SAFE
®
Brake, see
(
Y
page 75).
Activating/deactivating Active Blind Spot
Assist
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the
DriveAssist
submenu.
X
Press a to confirm your selection.
X
Press the : or 9 button to select
Blind Spot Assist
.
X
Press a to confirm.
The current selection appears.
X
To activate/deactivate: press the a but-
ton again.
When Active Blind Spot Assist is activated,
white radar waves propagating backwards
appear next to the vehicle in the
Assistance
Graphic
.
For further information about Active Blind Spot
Assist, see (
Y
page 234).
Setting ATTENTION ASSIST
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the
DriveAssist
submenu.
X
Press a to confirm your selection.
X
Press : or 9 to select
ATTENTION
ASSIST
.
X
Press a to confirm your selection.
X
Press : or 9 to select
Off
,
Standard
or
Sensitive
.
X
Press the a button to confirm the selec-
tion.
When ATTENTION ASSIST is deactivated, the
é symbol appears in the
Assistance
Graphic
menu in the multifunction display.
For further information about ATTENTION
ASSIST, see (
Y
page 228).
Activating/deactivating Active Lane
Keeping Assist
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
Menus and submenus
271
On-board
com
puter
and
dis
pla
ys
Z
-------------------------------------------------------------------------------------------------------------------------------------------------------------
X
Use : or 9 to select the
DriveAssist
submenu.
X
Press a to confirm your selection.
X
Press the : or 9 button to select
Lane Keeping Assist
.
X
Press a to confirm.
The current selection,
Standard
or
Adap‐
tive
, appears.
X
To change the setting: press a again.
For further information about Active Lane Keep-
ing Assist, see (
Y
page 237).
HYBRID submenu (PLUG-IN HYBRID
vehicles)
Setting the maximum charge current
Using the
Max. Charge Current
function, you
can limit the charge current value at which the
high-voltage battery should be charged.
Before starting the charging process at a power
socket, check the maximum permissible charge
current for the relevant power socket or the
building.
Only set the maximum permissible charge cur-
rent using the function if:
R
it is not possible to set the charge current on
the charging cable
R
the precise maximum permitted charge cur-
rent can only be set via the on-board com-
puter
Before charging the high-voltage battery at a
wallbox or charging station, ensure that the
charging current is not limited by the function. If
charging at a wallbox or a charging station,
select the maximum value.
Further information on charging the high-volt-
age battery and setting the charge current
(PLUG-IN HYBRID vehicles) (
Y
page 181).
X
Press ò on the steering wheel to open the
menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the
Hybrid
submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Max.
Charge Current
function.
You will see the selected setting.
X
Press the a button to save the setting.
Before charging the high-voltage battery, check
the maximum permissible charge current for the
relevant power socket.
Further information on charging the high-volt-
age battery (PLUG-IN HYBRID vehicles)
(
Y
page 181).
Setting the departure time
You can climatize the vehicle interior prior to
your departure with the "Set departure time"
function. Further information on pre-entry cli-
mate control (
Y
page 157).
If you recharge the high-voltage battery, the
function also displays the charging prediction.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the
Hybrid
submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Departure
Time
function.
You will see the selected setting.
X
Press the a button to save the setting.
X
To set no departure time: press : or
9 to select
No Pre-selection
.
X
Press a to confirm.
If you recharge the high-voltage battery, the
multifunction display also shows the time
when the high-voltage battery will be fully
charged.
or
X
To set a departure time: press : or 9
A
,
B
or
C
to select the desired preset.
X
Press the a button to confirm the selec-
tion.
X
Press : or 9 to set the hours.
X
Press a to confirm.
X
Press : or 9 to set the minutes.
X
Press a to confirm.
If you recharge the high-voltage battery, the
multifunction display shows the expected
272
Menus and submenus
On-board
computer
and
displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
condition of charge of the high-voltage bat-
tery for the departure time set.
Further information on charging the high-volt-
age battery (PLUG-IN HYBRID vehicles)
(
Y
page 181).
Head-up display submenu
Selecting other displays
:
Vehicle speed display
;
Vehicle speed and navigation instruction
display
=
Vehicle speed display and Traffic Sign Assist
Using the
Display Content
function, you can
choose from up to four display options depend-
ing on the vehicle's equipment. The selected
contents appear in the head-up display.
In Mercedes-AMG vehicles, you can also choose
between two AMG displays. If you select an
AMG display, the head-up display shows AMG-
specific contents.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the
Head-up
Display
submenu.
X
Press a to confirm.
X
Press : or 9 to select
Display Con‐
tent
.
X
Press a to confirm.
A graphic selection list appears.
X
Press : or 9 to select the desired dis-
play.
X
Press the a button to confirm the selec-
tion.
For further information about the traffic sign
displays, see Traffic Sign Assist (
Y
page 229).
Further information on navigation displays can
be found in the multimedia system; see the sep-
arate operating instructions.
Setting the position
You can adjust the position of the head-up dis-
play on the windshield. You can compensate for
height differences if the seat positions are
changed, for example.
X
Switch on the head-up display (
Y
page 259).
X
Press the ò button on the steering wheel
to open the menu list.
X
Press the : or 9 button on the steering
wheel to select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the
Head-up
Display
submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Position
function.
X
Press the a button to save the setting.
X
Press : or 9 to adjust the position to a
level from
Level +5
(up) to
Level -5
(down).
X
Press the a or % button to save the
setting.
Using the Memory function, you can save and
call up the set position of the head-up display as
a single memory preset (
Y
page 126).
Setting the brightness
The brightness of the head-up display is auto-
matically adjusted to the surrounding ambient
light. You can also individually adjust the bright-
ness of the head-up display.
X
Switch on the head-up display (
Y
page 259).
X
Press ò on the steering wheel to open the
menu list.
X
Press the : or 9 button on the steering
wheel to select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the
Head-up
Display
submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Brightness
function.
X
Press the a button to save the setting.
Menus and submenus
273
On-bo
ard
co
mpute
rand
di
spl
ays
Z
-------------------------------------------------------------------------------------------------------------------------------------------------------------
X
Press : or 9 to adjust the brightness
to a level from
Level +5
(bright) to
Level -5
(dark).
X
Press the a or % button to save the
setting.
Light submenu
Switching the spotlight function on/off
X
Press ò on the steering wheel to open the
menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Spotlight
function.
X
Press the a button to save the setting.
When the spotlight function is activated, the
assistance graphic shows the pedestrian
symbol.
Further information on the spotlight function
(
Y
page 232).
Switching the daytime running lamps on/
off
This function is not available in Canada.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the
Lights
sub-
menu.
X
Press a to confirm.
X
Using : or 9, select the
Daytime
Running Lights
function.
If the
Daytime Running Lights
function has
been switched on, the cone of light and the
W symbol are shown in white in the multi-
function display.
X
Press the a button to save the setting.
Further information on daytime running lamps
Daytime Running Lights
(
Y
page 130).
Instrument cluster submenu
Selecting the distance unit
The
Display Unit Speed-/Odometer
function
allows you to choose whether certain displays
appear in kilometers or miles in the multifunc-
tion display.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press the : or 9 button on the steering
wheel to select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the
Instru‐
ment Cluster
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Display Unit Speed-/Odometer
function.
The current setting
km
or
Miles
appears.
X
Press the a button to save the setting.
The selected unit of measurement for distance
applies to:
R
speedometer
R
digital speedometer in the
Trip
menu
R
additional speedometer in the status area on
the multifunction display
The unit in the additional speedometer is dis-
played inversely to the selected distance unit.
R
the odometer and trip odometer
R
the trip computer
R
the current consumption and the range
R
navigation instructions in the
Navi
menu
R
cruise control
R
SPEEDTRONIC
R
DISTRONIC PLUS
R
DISTRONIC PLUS with Steering Assist and
Stop&Go Pilot
R
ASSYST PLUS service interval display
Switching the additional speedometer
on/off
The
Additional Speedometer [km/h]
func-
tion allows you to choose whether the status
area in the multifunction display shows the
speed digitally. The unit in the additional speed-
ometer is always inverse to the speedometer
unit.
274
Menus and submenus
On-board
computer
and
displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
X
Press ò on the steering wheel to open the
menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the
Instru‐
ment Cluster
submenu.
X
Press a to confirm your selection.
X
Using : or 9, select the
Additional
Speedometer [km/h]
function.
The current selection appears.
X
To activate/deactivate: press a again.
Restoring the factory settings
X
Press ò on the steering wheel to open the
menu list.
X
Press : or 9 on the steering wheel to
select the
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the
Factory
Settings
submenu.
X
Press a to confirm.
The
Reset All Settings?
function
appears.
X
Press the : or 9 button to select
No
or
Yes
.
X
Press the a button to confirm the selec-
tion.
If you have selected and confirmed
Yes
, the
multifunction display shows a confirmation
message.
For safety reasons, the
Daytime Running
Lights
function in the
Lights
submenu is only
reset when the vehicle is stationary.
AMG menu (Mercedes-AMG vehicles)
WARMUP
:
Digital speedometer
;
Gear indicator
=
Upshift indicator
?
Transmission fluid temperature
A
Engine oil temperature
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the
AMG
menu.
X
Confirm by pressing a on the steering
wheel.
Upshift indicator: upshift indicator
UP
=
indicates that the engine has reached the
overrevving range when in the manual drive
program.
Engine/transmission oil temperature:
when the engine and transmission are at nor-
mal operating temperature, oil tempera-
ture ? and A are displayed in white in the
multifunction display.
If the multifunction display shows oil temper-
ature ? or A in blue, the engine or the
transmission are not yet at normal operating
temperature. Avoid driving at full engine out-
put during this time.
Menus and submenus
275
On-board
computer
and
displays
Z
-------------------------------------------------------------------------------------------------------------------------------------------------------------
SETUP
:
Drive program
C
,
S
or
M
;
ESP
®
mode (
ON
/
OFF
)
=
Suspension setting
SPORT
or
COMFORT
X
Press the ò button on the steering wheel
to open the menu list.
X
Press the : or 9 button on the steering
wheel to select the
AMG
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button until the
SETUP display appears.
276
Menus and submenus
On-board
computer
and
displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Display messages
Introduction
General notes
Display messages appear in the multifunction display.
Display messages with graphic displays may be shown in simplified form in the Operator's Manual
and may therefore differ from the multifunction display.
Please respond in accordance with the display messages and follow the additional notes in this
Operator's Manual.
With certain display messages, you will also hear a warning tone.
You can hide the display messages. The display messages are then stored in the message memory.
Rectify the cause of a display message as soon as possible.
When you stop and park the vehicle, please observe the notes on:
R
HOLD function (
Y
page 208)
R
Parking (
Y
page 189)
Hiding display messages
X
Press a or % on the steering wheel.
The multifunction display hides the display message.
The multifunction display shows high-priority display messages in red. Some high-priority display
messages cannot be hidden.
The multifunction display shows these messages continuously until the causes for the messages
have been remedied.
Message memory
The on-board computer saves certain display messages in the message memory. You can call up
the display messages:
X
Press the ò button on the steering wheel to open the menu list.
X
Press : or 9 on the steering wheel to select the
Service
menu.
X
Confirm by pressing a on the steering wheel.
X
Press the : or 9 button to select the message memory.
If there are no display messages, the
No Messages
message appears in the multifunction display.
When there are display messages, the number of stored messages appears.
X
Press a to confirm.
X
Press the : or 9 button to scroll through the display messages.
Display messages
277
O
n-board
com
puter
and
di
spla
ys
Z
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Safety systems
Display messages
Possible causes/consequences and M Solutions
!÷
Currently Unavaila‐
ble See Operator's
Manual
ABS (Anti-lock Brake System), ESP
®
(Electronic Stability Program),
BAS (Brake Assist), PRE‑SAFE
®
, the HOLD function, Hill Start Assist,
Crosswind Assist, STEER CONTROL, Active Lane Keeping Assist and
Active Blind Spot Assist are temporarily unavailable.
BAS PLUS with Cross-Traffic Assist, PRE‑SAFE
®
Brake, PRE‑SAFE
®
PLUS and COLLISION PREVENTION ASSIST PLUS may also have
failed.
In addition, the ÷ and ! warning lamps light up in the instru-
ment cluster.
ATTENTION ASSIST is deactivated.
For example, the on-board voltage may be insufficient.
G
WARNING
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you brake
hard, for example.
The steerability and braking characteristics may be severely affected.
The braking distance in an emergency braking situation can increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Drive on carefully.
Carefully drive a suitable distance, making slight steering move-
ments at a speed above 12 mph (20 km/h).
If the display message disappears, the functions mentioned above
are available again.
If the multifunction display still shows the display message:
X
Drive on carefully.
X
Visit a qualified specialist workshop immediately.
!÷
Inoperative See
Operator's Manual
ABS, ESP
®
, BAS, PRE‑SAFE
®
, the HOLD function, Hill Start Assist,
Crosswind Assist, STEER CONTROL, Active Lane Keeping Assist and
Active Blind Spot are unavailable due to a malfunction.
BAS PLUS with Cross-Traffic Assist, PRE‑SAFE
®
Brake, PRE‑SAFE
®
PLUS and COLLISION PREVENTION ASSIST PLUS may also have
failed.
The $ (USA only) or J (Canada only), ÷ and ! warning
lamps in the instrument cluster may also light up.
ATTENTION ASSIST is deactivated.
G
WARNING
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you brake
hard, for example.
The steerability and braking characteristics may be severely affected.
The braking distance in an emergency braking situation can increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
278
Display messages
On-board
computer
and
displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Display messages
Possible causes/consequences and M Solutions
There is an increased risk of skidding and an accident.
X
Drive on carefully.
X
Visit a qualified specialist workshop immediately.
÷
Inoperative See
Operator's Manual
ESP
®
, BAS, PRE‑SAFE
®
, the HOLD function, Hill Start Assist, Cross-
wind Assist, STEER CONTROL, Active Lane Keeping Assist and Active
Blind Spot are unavailable due to a malfunction.
BAS PLUS with Cross-Traffic Assist, PRE‑SAFE
®
Brake, PRE‑SAFE
®
PLUS and COLLISION PREVENTION ASSIST PLUS may also have
failed.
The ÷ warning lamp also lights up in the instrument cluster.
ATTENTION ASSIST is deactivated.
G
WARNING
The brake system continues to function normally, but without the
functions listed above.
The braking distance in an emergency braking situation can thus
increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Drive on carefully.
X
Visit a qualified specialist workshop immediately.
Display messages
279
O
n-board
com
puter
and
di
spla
ys
Z
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст