Mazda 6. Manual — part 404
III–2
PANEL REPLACEMENT
SHROUD UPPER REINFORCEMENT REMOVAL
A6E981253152B01
1. Remove the shroud upper reinforcement.
End Of Sie
PANEL REPLACEMENT
A6E9812B001
PANEL REPLACEMENT
III–3
III
SHROUD UPPER RAINFORCEMENT INSTALLATION
A6E981253152B02
1. Drill holes for plug welds before installing new parts.
2. After trial-fitting new parts, make sure the related parts fit properly.
End Of Sie
A6E9812B002
III–4
PANEL REPLACEMENT
COWL SIDE REINFORCEMENT AND COWL UPPER PLATE REMOVAL
A6E981253290B01
1. Remove the cowl side reinforcement.
Note
• The weld locations (B) in the figure indicate the same locations.
Caution
• Be careful not to damage the windshield when drilling the location indicated by (A).
2. Remove the cowl upper plate.
End Of Sie
A6E9812B003
PANEL REPLACEMENT
III–5
III
COWL SIDE REINFORCEMENT AND COWL UPPER PLATE INSTALLATION
A6E981253290B02
1. When installing new parts, position each part so that the section measurement aligns to the body dimension.
2. Drill holes for plug welds before installing new parts.
3. After trial-fitting new parts, make sure the related parts fit properly.
End Of Sie
A6E9812B004
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст