Mazda 6. Manual — part 288
BUMPER
S–47
S
FRONT BUMPER REMOVAL/INSTALLATION
A6E772650031W01
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Front Bumper Removal Note
1. Pull the front bumper ends (wheel arch) outward to disengage from the bumper slider.
Caution
• If only one side of the front bumper is disengaged from the bumper slider and the bumper falls, it
could be damaged. When disengaging the front bumper from the slider, secure the bumper so that
it does not fall.
2. Remove the front bumper from the body.
BUMPER
1
Screw A
2
Fastener A
3
Screw B
4
Bolt
5
Fastener B
6
S–47 Front Bumper Removal Note
S–48 Front Bumper Installation Note
A6E7726W003
A6E7726W006
S–48
BUMPER
Front Bumper Installation Note
1. Spread the front bumper ends (wheel arches) apart.
2. Attach the front bumper to the body.
3. Press the front bumper connection portion into the body to engage with the bumper slider.
End Of Sie
FRONT BUMPER DISASSEMBLY/ASSEMBLY
A6E772650031W02
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
End Of Sie
BUMPER REINFORCEMENT REMOVAL/INSTALLATION
A6E772650031W03
1. Disconnect the negative battery cable.
2. Remove the front bumper. (See
S–47 FRONT BUMPER REMOVAL/INSTALLATION
T–26 FRONT COMBINATION LIGHT REMOVAL/INSTALLATION
.)
4. Suport the radiator and the condenser using the wire.
5. Remove the bolt.
6. Remove the bumper reinforcement.
7. Install in the reverse order of removal.
End Of Sie
1
Front bumper mesh
2
Front bumper fascia
A6E7726W004
A6E7726W005
BUMPER
S–49
S
REAR BUMPER REMOVAL/INSTALLATION
A6E772650221W01
1. Disconnect the negative battery cable.
2. Remove the rear combination light.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Rear Bumper Removal Note
1. Pull the rear bumper ends (wheel arch) outward
to disengage with the bumper slider.
Caution
• If only one side of the rear bumper is
disengaged from the bumper slider and
the bumper falls, it could be damaged.
When disengaging the rear bumper from
the slider, secure the bumper so that it
does not fall.
Rear Bumper Installation Note
1. Spread the rear bumper ends (wheel arches) apart.
2. Attach the rear bumper to the body.
3. Press the rear bumper connection portion into the body to engage with the bumper slider.
1
Screw A
2
Screw B
3
Screw C
4
Fastener A
5
Bolt A
6
Fastener B
7
S–49 Rear Bumper Installation Note
8
9
Bolt B
10
Rear bumper reinforcement
A6E7726W001
A6E7726W007
S–50
BUMPER, EXTERIOR ATTACHMENT
Refractor Removal Note
1. Lift the refractor up in the direction of the arrow,
then unhook it from the rear bumper.
End Of Sie
RADIATOR GRILLE REMOVAL/INSTALLATION
A6E772850710W01
1. Remove the screws.
2. Press clip A in the direction of the arrow, pll the
radiator grille outward and remove from the front
bumper.
3. Install in the reverse order of removal.
End Of Sie
COWL GRILLE REMOVAL/INSTALLATION
A6E772850790W01
1. Remove the windshield wiper arm and blade. (See
T–57 WINDSHIELD WIPER ARM AND BLADE REMOVAL/
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
End Of Sie
A6E7726W002
EXTERIOR ATTACHMENT
A6E7728W005
1
Front fender molding
2
Weatherstrip
3
Cowl grille
A6E7728W004
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст