Mazda 6. Manual — part 409
III–22
PANEL REPLACEMENT
SIDE SILL PANEL REMOVAL
A6E981270270B01
1. Remove the side sill panel.
2. Drill the 3 weld locations indicated by (A), from the room side.
3. Remove the side sill reinforcement.
End Of Sie
A6E9812B021
PANEL REPLACEMENT
III–23
III
SIDE SILL PANEL INSTALLATION
A6E981270270B02
1. When joining the new and old parts, temporarily install and fit the new part in position, measure each dimension
according to the body dimension, then adjust the position to align it to the standard dimensions.
2. Drill holes for plug welds before installing new parts.
3. Plug welding of 59 weld locations indicated by (A), during installation of the side sill panel.
4. After trial-fitting new parts, make sure the related parts fit properly.
End Of Sie
A6E9812B022
III–24
PANEL REPLACEMENT
REAR END PANEL REMOVAL
A6E981270750B01
SEDAN
1. Remove the rear end panel.
A6E9812B023
PANEL REPLACEMENT
III–25
III
5HB
1. Drill the 2 weld locations indicated by (A), from the room side.
2. Remove the rear end panel.
End Of Sie
A6E9812B025
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст