Mazda CX-9 Grand Touring. Manual — part 169
Fig. 33: Pressing Bearing With SST
Courtesy of MAZDA MOTORS CORP.
JOINT SHAFT DISASSEMBLY [AWD]
1. Disassemble in the order indicated in the table.
Fig. 34: Identifying Joint Shaft Components (AWD)
Courtesy of MAZDA MOTORS CORP.
JOINT SHAFT DISASSEMBLY NOTE
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:58 AM
Page 22
© 2005 Mitchell Repair Information Company, LLC.
1. Remove the joint shaft using a press.
Fig. 35: Pressing Joint Shaft
Courtesy of MAZDA MOTORS CORP.
DUST SEAL (AXLE SIDE) DISASSEMBLY NOTE
1. Remove the dust seal using a flathead screwdriver.
DUST SEAL (DIFFERENTIAL SIDE) DISASSEMBLY NOTE
1. Remove the dust seal using a flathead screwdriver.
BEARING DISASSEMBLY NOTE
1. Remove the bearing using a press and the SSTs.
Substitution SST
49B014 001
Outer diameter: 47-55 mm {1.9-2.1 in}
49W034 301
Inner diameter: 67.5-72 mm {2.7-2.8 in}
Inner depth: 30 mm {1.2 in} or more
Plate thickness: 1 mm {0.04 in} or more
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:58 AM
Page 23
© 2005 Mitchell Repair Information Company, LLC.
Fig. 36: Pressing Bearing
Courtesy of MAZDA MOTORS CORP.
JOINT SHAFT ASSEMBLY [2WD]
1. Assemble in the order indicated in the table.
Fig. 37: Identifying Joint Shaft Components (2WD) & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
BEARING ASSEMBLY NOTE
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:58 AM
Page 24
© 2005 Mitchell Repair Information Company, LLC.
1. Install the new bearing using a press and the SST.
Substitution SST
49B025 004
Outer diameter: 61 mm {2.4 in} or more
Inner diameter: 46 mm {1.8 in} or more
Plate thickness: 1 mm {0.04 in} or more
Fig. 38: Pressing Bearing With SST
Courtesy of MAZDA MOTORS CORP.
DUST SEAL (DIFFERENTIAL SIDE) ASSEMBLY NOTE
1. Apply grease to the new dust seal lip.
2. Install the dust seal (differential side) using a press and the SSTs.
Substitution SST
49B025 004
Outer diameter: 58-59.8 mm {2.2-2.3 in} or less
Inner diameter: 53 mm {2.1 in} or more
Inner depth: 7.5 mm {0.30 in} or more
49W034 301
Inner diameter: 67.5-72.0 mm {2.66-2.83 in}
Inner depth: 8.5 mm {0.33 in} or more
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:58 AM
Page 25
© 2005 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст