Mazda CX-9 Grand Touring. Manual — part 170
Plate thickness: 1 mm {0.04 in} or more
Fig. 39: Pressing Dust Seal (Differential Side) With SST
Courtesy of MAZDA MOTORS CORP.
JOINT SHAFT ASSEMBLY NOTE
1. Install the joint shaft using a press and the SST.
Fig. 40: Pressing Joint Shaft With SST
Courtesy of MAZDA MOTORS CORP.
DUST SEAL (AXLE SIDE) ASSEMBLY NOTE
1. Apply grease to the new dust seal lip.
2. Install the dust seal (axle side) using a press and the SST.
Substitution SST
49B025 004
Outer diameter: 58-59.8 mm {2.2-2.3 in} or more
Inner diameter: 53 mm {2.1 in} or more
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:58 AM
Page 26
© 2005 Mitchell Repair Information Company, LLC.
Inner depth: 7.5 mm {0.30 in} or more
Fig. 41: Pressing Dust Seal (Axle Side) With SST
Courtesy of MAZDA MOTORS CORP.
JOINT SHAFT ASSEMBLY [AWD]
1. Assemble in the order indicated in the table.
Fig. 42: Identifying Joint Shaft Assembly Components (AWD) & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:58 AM
Page 27
© 2005 Mitchell Repair Information Company, LLC.
BEARING ASSEMBLY NOTE
1. Install the new bearing using a press and the SST.
Substitution SST
49B025 004
Outer diameter: 61 mm {2.4 in} or more
Inner diameter: 46 mm {1.8 in} or more
Plate thickness: 1 mm {0.04 in} or more
Fig. 43: Pressing Bearing With SST
Courtesy of MAZDA MOTORS CORP.
DUST SEAL (DIFFERENTIAL SIDE) ASSEMBLY NOTE
1. Apply grease to the new dust seal lip.
2. Install the dust seal (differential side) using a press and the SSTs.
Substitution SST
49B025 004
Outer diameter: 58-59.8 mm {2.2-2.3 in} or less
Inner diameter: 53 mm {2.1 in} or more
Inner depth: 7.5 mm {0.30 in} or more
49W034 301
Inner diameter: 67.5-72.0 mm {2.66-2.83 in}
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:58 AM
Page 28
© 2005 Mitchell Repair Information Company, LLC.
Inner depth: 8.5 mm {0.33 in} or more
Plate thickness: 1 mm {0.04 in} or more
Fig. 44: Pressing Dust Seal (Differential Side) With SST
Courtesy of MAZDA MOTORS CORP.
JOINT SHAFT ASSEMBLY NOTE
1. Install the joint shaft using a press and the SST.
Fig. 45: Pressing Joint Shaft With SST
Courtesy of MAZDA MOTORS CORP.
DUST SEAL (AXLE SIDE) ASSEMBLY NOTE
1. Apply grease to the new dust seal lip.
2. Install the dust seal (axle side) using a press and the SST.
Substitution SST
49B025 004
Outer diameter: 58-59.8 mm {2.2-2.3 in} or more
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:58 AM
Page 29
© 2005 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст