Mazda CX-9 Grand Touring. Manual — part 277
4
INSPECT AIR CLEANER ELEMENT
Remove air cleaner element with the
engine running.
Is the engine speed increased?
Yes Replace the air cleaner element, then go to Step 9.
No
Go to the next step.
5
INSPECT FOR AIR SUCTION AT
INTAKE AIR SYSTEM
Inspect for air leakage at the
following:
Around connection of
dynamic chamber and intake
manifold
Around connection of intake
manifold and cylinder head
Is air leakage found?
Yes
Repair or replace the suspected part, then go to
Step 9.
No
Go to the next step.
6
INSPECT THROTTLE BODY
PASSAGE
Is the throttle body clogged?
Yes
Clean or replace the throttle body passage, then go
to Step 9.
No
Go to the next step.
7
INSPECT ENGINE COMPRESSION
Inspect the engine compression. (See
COMPRESSION INSPECTION
[MZI-3.7] .)
Is the engine compression normal?
Yes Go to the next step.
No
Overhaul the engine, then go to the next step.
8
INSPECT FOR RESTRICTION IN
EXHAUST SYSTEM AND TWC
Is there any restriction?
Yes
Replace malfunctioning part, then go to the next
step.
No
Go to the next step.
9
VERIFY TROUBLESHOOTING OF
DTC P0505 HAS BEEN COMPLETED
Verify that all disconnected
connectors are reconnected.
Turn the ignition switch to the ON
position (Engine off).
Clear the DTC from the PCM
memory using the M-MDS.
Perform the KOEO and KOER self-
test.
Retrieve the DTCs using the M-
MDS.
Yes
Replace the PCM, then go to the next step. (See
PCM REMOVAL/INSTALLATION [MZI-
3.7] .)
No
Go to the next step.
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:08:38 AM
Page 241
© 2005 Mitchell Repair Information Company, LLC.
DTC P0506 [MZI-3.7]
DTC P0506 (MZI-3.7) DETECTION CONDITIONS AND POSSIBLE CAUSES
DIAGNOSTIC PROCEDURE
DTC P0506 (MZI-3.7) DIAGNOSTIC PROCEDURE
Is the PENDING CODE for this
DTC present?
10
VERIFY AFTER REPAIR
PROCEDURE
Perform the "AFTER REPAIR
PROCEDURE".
(See AFTER REPAIR
PROCEDURE [MZI-3.7].)
Are any DTC present?
Yes
Go to the applicable DTC inspection. (See DTC
TABLE [MZI-3.7].)
No
Troubleshooting completed.
DTC P0506
IAC system RPM lower than expected
DETECTION
CONDITION
This DTC is set when the PCM detects an engine idle speed that is less
than the desired engine speed.
POSSIBLE CAUSE
Engine mechanical concern
Intake air restriction
Exhaust restriction
Sludged throttle body
Vacuum leakage
Throttle body malfunction
PCM malfunction
STEP
INSPECTION
ACTION
1
VERIFY FREEZE FRAME DATA
HAS BEEN RECORDED
Has FREEZE FRAME DATA been
recorded?
Yes Go to the next step.
No
Record FREEZE FRAME DATA on the repair
order, then go to the next step.
2
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
Verify related Service Bulletins
and/or on-line repair information
availability.
Yes
Perform repair or diagnosis according to the
available Service Bulletins.
If the vehicle is not repaired, then go to the
next step.
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:08:38 AM
Page 242
© 2005 Mitchell Repair Information Company, LLC.
Is any related Service Bulletins
available?
No
Go to the next step.
3
VERIFY RELATED PENDING OR
STORED DTCS
Turn the ignition switch off then to
the ON position (Engine off).
Verify pending code or stored
DTCs using the M-MDS.
Is other DTC present?
Yes
Repair applicable DTCs. (See DTC TABLE [MZI-
3.7].)
No
Go to the next step.
4
INSPECT AIR CLEANER ELEMENT
Remove air cleaner element with
the engine running.
Is the engine speed increased?
Yes Replace the air cleaner element, then go to Step 7.
No
Go to the next step.
5
INSPECT INTAKE AIR SYSTEM
FOR EXCESSIVE AIR SUCTION
Visually inspect the hose in intake
air system for damages.
Is there any malfunction?
Yes
Repair or replace the malfunctioning part, then go
to Step 7.
No
Go to the next step.
6
INSPECT THROTTLE BODY
PASSAGE
Is the throttle body clogged?
Yes
Clean or replace the throttle body passage, then go
to the next step.
No
Go to the next step.
7
VERIFY TROUBLESHOOTING OF
DTC P0506 HAS BEEN
COMPLETED
Verify that all disconnected
connectors reconnected.
Start the engine.
Clear the DTC from the PCM
memory using the M-MDS.
Depress brake pedal for 14 s or
more.
Is PENDING CODE for this DTC
present?
Yes
Replace the PCM, then go to the next step. (See
PCM REMOVAL/INSTALLATION [MZI-
3.7] .)
No
Go to the next step.
8
VERIFY AFTER REPAIR
PROCEDURE
Perform the "AFTER REPAIR
PROCEDURE".
Yes
Go to the applicable DTC inspection. (See DTC
TABLE [MZI-3.7].)
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:08:38 AM
Page 243
© 2005 Mitchell Repair Information Company, LLC.
DTC P0507 [MZI-3.7]
DTC P0507 (MZI-3.7) DETECTION CONDITIONS AND POSSIBLE CAUSES
DIAGNOSTIC PROCEDURE
DTC P0507 (MZI-3.7) DIAGNOSTIC PROCEDURE
(See AFTER REPAIR
PROCEDURE [MZI-3.7].)
Are any DTCs present?
No
Troubleshooting completed.
DTC P0507
IAC system RPM higher than expected
DETECTION
CONDITION
This DTC is set when the PCM detects an engine idle speed that is more
than the desired engine speed.
POSSIBLE CAUSE
Intake air leak after throttle body
Vacuum leakage
EVAP system malfunction
Throttle body malfunction
PCM malfunction
STEP
INSPECTION
ACTION
1
VERIFY FREEZE FRAME DATA HAS
BEEN RECORDED
Has FREEZE FRAME DATA been
recorded?
Yes Go to the next step.
No
Record FREEZE FRAME DATA on the repair
order, then go to the next step.
2
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
Verify related Service Bulletins and/or
on-line repair information availability.
Is any related Service Bulletins
available?
Yes
Perform repair or diagnosis according to the
available Service Bulletins.
If the vehicle is not repaired, then go to
the next step.
No
Go to the next step.
3
VERIFY RELATED PENDING OR
STORED DTCS
Turn the ignition switch off then to the
ON position (Engine off).
Verify pending code or stored DTCs
using the M-MDS.
Is other DTC present?
Yes
Repair applicable DTCs. (See DTC TABLE
[MZI-3.7].)
No
Go to the next step.
INSPECT AIR CLEANER ELEMENT
Replace the air cleaner element, then go to Step
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:08:38 AM
Page 244
© 2005 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст