Mazda CX-9 Grand Touring. Manual — part 575

Fig. 39: Identifying Edge Cover And Long Slider Cover
Courtesy of MAZDA MOTORS CORP.

4. Remove the following parts:

1. Trunk box (See TRUNK BOX REMOVAL/INSTALLATION .)

2. Seat side box (See SEAT SIDE BOX REMOVAL/INSTALLATION .)

3. Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION .)

4. Third-row seat (See THIRD-ROW SEAT REMOVAL/INSTALLATION.)

5. Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION .)

6. Third-row seat belt lower anchor installation bolt (See THIRD-ROW SEAT BELT

REMOVAL/INSTALLATION .)

7. Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)

5. Set the floor covering out of the way.

6. Remove in the order indicated in the table.

Fig. 40: Identifying Long Slider, Bolt & Torque Specifications
Courtesy of MAZDA MOTORS CORP.

7. Install in the reverse order of removal.

THIRD-ROW SEAT REMOVAL/INSTALLATION

1. Remove the trunk box. (See TRUNK BOX REMOVAL/INSTALLATION .)

2. Remove the covers.

3. Remove the bolts.

4. Install in the reverse order of removal.

2008 Mazda CX-9 Grand Touring

2008 BODY & ACCESSORIES Seats - Mazda CX-9

Microsoft

Sunday, November 15, 2009 10:40:01 AM

Page 30

© 2005 Mitchell Repair Information Company, LLC.

Fig. 41: Identifying Third-Row Seat, Bolt & Torque Specifications
Courtesy of MAZDA MOTORS CORP.

THIRD-ROW SEAT DISASSEMBLY/ASSEMBLY

1. Disassemble in the order indicated in the table.

2. Assemble in the reverse order of disassembly.

2008 Mazda CX-9 Grand Touring

2008 BODY & ACCESSORIES Seats - Mazda CX-9

Microsoft

Sunday, November 15, 2009 10:40:01 AM

Page 31

© 2005 Mitchell Repair Information Company, LLC.

Fig. 42: Exploded View Of Third-Row Seat & Torque Specifications
Courtesy of MAZDA MOTORS CORP.

2008 Mazda CX-9 Grand Touring

2008 BODY & ACCESSORIES Seats - Mazda CX-9

Microsoft

Sunday, November 15, 2009 10:40:01 AM

Page 32

© 2005 Mitchell Repair Information Company, LLC.

2008 ENGINE

Starting System (MZI-3.7) - Mazda CX-9

STARTING SYSTEM LOCATION INDEX [MZI-3.7]

Fig. 1: Identifying Starter
Courtesy of MAZDA MOTORS CORP.

STARTER REMOVAL/INSTALLATION [MZI-3.7]

1. Remove the battery and battery tray. (See BATTERY REMOVAL/INSTALLATION [MZI-3.7] .)

2. Position the selector cable out of the way.

3. Remove in the order indicated in the table.

4. Install in the reverse order of removal.

WARNING:



Remove and install all parts when the engine is cold, otherwise they
can cause severe burns or serious injury.



When the battery cables are connected, touching the vehicle body
with starter terminal B will generate sparks. This can cause personal
injury, fire, and damage to the electrical components. Always
disconnect the negative battery cable before performing the
following operation.

2008 Mazda CX-9 Grand Touring

2008 ENGINE Starting System (MZI-3.7) - Mazda CX-9

2008 Mazda CX-9 Grand Touring

2008 ENGINE Starting System (MZI-3.7) - Mazda CX-9

Microsoft

Sunday, November 15, 2009 9:56:47 AM

Page 1

© 2005 Mitchell Repair Information Company, LLC.

Microsoft

Sunday, November 15, 2009 9:56:50 AM

Page 1

© 2005 Mitchell Repair Information Company, LLC.