Mazda Training manual — part 215
TC001-18-01H
INTRODUCTION TO M-MDS
12 - Installing IDS on Laptop
Activity 12- Page 11
Activity 12
(Continued)
21. Remove the IDS DVD and store it in a safe place.
22. The icon IDS will now be on the desktop.
Ids.lnk
NOTE
If you are installing IDS for a new VCM (i.e., the VCM has not been used before),
you must perform the following steps to update the VCM.
23. Double-click the IDS icon to start IDS.
24. Select
Start New Session, then press enter or click tick.
TC001-18-01H
INTRODUCTION TO M-MDS
12 - Installing IDS on Laptop
Activity 12- Page 12
Activity 12
(Continued)
25. Make connections as shown, do not click tick. Make sure you plug the data
cable into DLC2 on a current Mazda vehicle.
26. Click tick in the pop-up window to update the VCM code.
TC001-18-01H
INTRODUCTION TO M-MDS
12 - Installing IDS on Laptop
Activity 12- Page 13
Activity 12
(Continued)
27. This screen displays the progress of the code being updated.
28. Click tick once the progress bar has turned green.
TC001-18-01H
INTRODUCTION TO M-MDS
12 - Installing IDS on Laptop
Activity 12- Page 14
Activity 12
(Continued)
29. Click
Start New Session to diagnose a vehicle or the
X
in the upper right
corner to close this window.
30. Click tick in the pop-up window to exit IDS and return to the desktop.
IDS and the VCM are now ready to use.
Conclusion:
In this activity, you installed IDS and updated a new VCM.
Instructor Sign Off: ___________________________
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст