Mazda Training manual — part 204

TC001-18-01H

INTRODUCTION TO M-MDS
08 - Verify/Change Programmable Parameters

Activity 08- Page4

Activity 08
(Continued)

5. Tap Yes 6. Tap Tick

7. Tap NO 8. Select Programming, Tap Tick

TC001-18-01H

INTRODUCTION TO M-MDS
08 - Verify/Change Programmable Parameters

Activity 08- Page5

Activity 08
(Continued)

9. Tap Tick 10. Select Programmable Parameters,
Tap Tick

11. Select Tire Size/Axle Ratio, 12. Please wait.

Tap Tick

TC001-18-01H

INTRODUCTION TO M-MDS
08 - Verify/Change Programmable Parameters

Activity 08- Page6

Activity 08
(Continued)

Confirm the tire size and axle ratio. If they are incorrect, select the correct size/axle
ratio then Tap Tick. Verify correct information with your instructor.

Where did you find the information?________________________________

13. If Size and Ratio is now 14. Tap Tick
correct, Tap Tick

15. Follow prompts on screen. Tap Tick

TC001-18-01H

INTRODUCTION TO M-MDS
08 - Verify/Change Programmable Parameters

Activity 08- Page7

Activity 08
(Continued)

NOTE

Do NOT remove fuses as instructed to on the next screen. Make sure the
vehicles battery is fully charged and that you have a battery charger set to
around 15 amps connected to the vehicles battery.

1. Tap Tick 2. Turn Ignition on, Tap Tick

3. Wait until the screens have shown the finished reprogramming.