Mazda Training manual — part 203
TC001-18-01H
INTRODUCTION TO M-MDS
07 - Reprogramming/Updating a PCM
Activity 07- Page 17
Activity 07
(Continued)
The main screen displays:
46. Turn the ignition key OFF.
47. Disconnect PDS from the vehicle.
48. Turn OFF the PDA.
Conclusion:
In this activity, you used M-MDS to reprogram or update a PCM.
Instructor Sign-off: ____________________________________
Your PDA’s main screen
may look slightly
different than this
example.
TC001-18-01H
INTRODUCTION TO M-MDS
08 - Verify/Change Programmable Parameters
Activity 08- Page1
Activity 08: Verify/Change Programmable Parameters
Upon completing this activity you will be able to View/Change Programmable
Parameters on a current Mazda using M-MDS.
What you will need to complete this activity:
• A Current Tribute or B Series Mazda
• PDS
Connect the M-MDS data cable to DLC number 2 under the dash.
The PDA will turn on automatically.
Important!
You should see all 3 of the following USB pop up boxes. However they may “flash by” to
quick to see. The most important is the 3
rd
one “user authenticated”
TC001-18-01H
INTRODUCTION TO M-MDS
08 - Verify/Change Programmable Parameters
Activity 08- Page2
Activity 08
(Continued)
Tap Start Tap PDS
Establishing Communications
Note:
The screen above is the PDA connecting to the VCM via the USB network.
TC001-18-01H
INTRODUCTION TO M-MDS
08 - Verify/Change Programmable Parameters
Activity 08- Page3
Activity 08
(Continued)
1. Tap the blue car 2. Tap Tick
3. Tap Tick 4. Establishing Communication
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст