Mazda CX-30 (2021 year). Manual in english — page 4

Before Driving

Doors and Locks

(Without theft-deterrent system)

▼ Auto Lock/Unlock Function

When locking, the hazard warning

lights and a beep sound operate 1

WARNING

time.

In addition, before the liftgate closes,

Do not pull the inner handle on a

the hazard warning lights operate 2

front door:

times and a long beep sound is

Pulling the inner handle on a front

activated.

door while the vehicle is moving is

dangerous. Passengers can fall out of

For details on the power liftgate

the vehicle if the door opens

function, refer to Power Liftgate on

accidentally , which could result in

page 3-22.

death or serious injury.

^ When the vehicle speed exceeds 20

Without power liftgate

km/h (12 mph), all the doors,

When locking using the door-lock

fuel-filler lid, and liftgate lock

switch, press the door-lock switch with

automatically.

all of the following conditions met and

^ When the ignition is switched off, all

then close the liftgate.

the doors, fuel-filler lid, and liftgate

unlock automatically.

^ You are carrying the transmitter.

^ The ignition is switched OFF.

The auto lock/unlock function settings

^ All the doors are closed.

can be changed.

Refer to the Settings section in the

(With theft-deterrent system)

Mazda Connect Owner's Manual.

When locking, a beep sound operates

1 time.

▼ Locking, Unlocking with

When the liftgate closes, the hazard

Door-Lock Knob

warning lights operate 1 time.

Operation from inside

(Without theft-deterrent system)

To lock any door from the inside, press

When locking, the hazard warning

the door-lock knob.

lights and a beep sound operate 1

To unlock, pull it outward.

time.

This does not operate the other door

NOTE

locks.

^ To prevent the transmitter from being

left in the vehicle, make sure that you

carry the transmitter before locking.

^ After locking by pressing the

door-lock switch and when the

liftgate is closed with the transmitter

left in the vehicle, the liftgate is

unlocked.

1. Unlocked: Red indicator

2. Lock

3-18

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Doors and Locks

3. Unlock

^ All the doors, fuel-filler lid , and

liftgate are unlocked when the lock

knob on all the doors is pressed

Operation from outside

down to the lock side and all the

To lock any door using its door-lock

doors are closed with the transmitter

knob from the outside, press the

left in the vehicle.

door-lock knob to the lock position

▼ Rear Door Child Safety Locks

and close the door (holding the door

handle in the open position is not

Rear doors that have been locked

required).

using the child safety lock switched to

This does not operate the other door

the lock side cannot be opened from

locks.

inside the vehicle.

For child safety, switch the child safety

lock on both rear doors to the lock

side.

When opening a rear door with the

child safety lock switched to the lock

side, pull the outer door handle with

the lock knob inside the vehicle

switched to the unlock side.

1. Auxiliary key (page 3-2)

2. Unlock

3. Lock

NOTE

When locking the door this way:

^ Be careful not to leave the key inside

the vehicle.

^ The doors cannot be locked using

the driver's door lock knob if any

door or liftgate is open when the

ignition is switched to ACC or ON.

3-19

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Doors and Locks

Liftgate

CAUTION

▼ Liftgate

¾ Before opening the liftgate, remove

any snow and ice accumulation on it.

Otherwise, the liftgate could close

WARNING

under the weight of the snow and ice

resulting in injury.

Never allow a person to ride in the

¾ Be careful when opening/closing the

luggage compartment:

liftgate during strong winds. If a

Allowing a person to ride in the

strong gust blows against the liftgate,

luggage compartment is dangerous.

it could close suddenly resulting in

The person in the luggage

injury.

compartment could be seriously

¾ Fully open the liftgate and make sure

injured or killed during sudden braking

that it stays open. If the liftgate is

or a collision.

only opened partially, it could slam

shut by vibration or wind gusts

Do not drive with the liftgate open:

resulting in injury.

Exhaust gas in the cabin of a vehicle is

¾ When loading or unloading luggage

dangerous. An open liftgate in a

in the luggage compartment, turn off

moving vehicle will cause exhaust gas

the engine. Otherwise, you could get

to be drawn into the cabin. This gas

burned by the heat of the exhaust

contains CO (carbon monoxide),

gas.

which is colorless, odorless, and highly

¾ Be careful not to apply excessive

poisonous, and it can cause loss of

force to the damper stay on the

consciousness and death. Moreover,

liftgate such as by putting your hand

an open liftgate could cause occupants

on the stay. Otherwise, the damper

to fall out in an accident.

stay may bend and affect the liftgate

operation.

Do not stack or leave loaded luggage

unsecured in the luggage

compartment:

Otherwise, the luggage may move or

collapse, resulting in injury or an

accident. In addition, do not load

luggage higher than the seatbacks. It

may affect the side or rear field of view.

Additionally, if the air bags deploy, the

cargo may scatter which could result in

serious injury or death.

1. Damper stay

3-20

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Doors and Locks

¾ Do not modify or replace the liftgate

^ The liftgate can be closed when the

damper stay. Consult an Authorized

doors are locked with the key left in

Mazda Dealer if a liftgate damper

the vehicle. However, to prevent

stay is deformed or damaged for

locking the key in the vehicle, the

reasons such as a collision or if there

liftgate can be opened by pressing

is some other problem.

the electric liftgate opener. If the

liftgate cannot be opened despite

▼ Opening and Closing the Liftgate

doing this procedure, first push the

Opening the liftgate

liftgate completely closed, then press

the electric liftgate opener to fully

Using the electric liftgate opener

open the liftgate.

^ When the liftgate latch is released by

Unlock the doors and liftgate, then

press the electric liftgate opener on the

pressing the electric liftgate opener,

the liftgate raises slightly. If the

liftgate and raise the liftgate when the

latch releases.

liftgate is not operated for a certain

period of time, the liftgate cannot be

For the power liftgate operation, refer

to Power Liftgate on page 3-22.

raised.

To open

Press the electric liftgate opener

again.

To close

To close the liftgate from its slightly

raised position, open it first by

pressing the electric liftgate opener,

then close it after waiting at least 1

second.

^ If the vehicle battery is dead or there

is a malfunction in the electrical

NOTE

system and the liftgate cannot be

unlocked, the liftgate can be opened

(With the advanced keyless function)

by performing the emergency

^ A locked liftgate can also be opened

procedure.

while the key is being carried.

Refer to When Liftgate Cannot be

^ When opening the liftgate with the

Opened on page 7-43.

doors and the liftgate locked, it may

require a few seconds for the liftgate

latch to release after the electric

liftgate opener is pressed.

3-21

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Doors and Locks

Closing the liftgate

▼ Power Liftgate*

Lower the liftgate slowly using the

The power liftgate opens/closes

liftgate grip recess, then push the

electrically by operating the switches in

liftgate closed using both hands.

the vehicle or the buttons on the

Do not slam it. Pull up on the liftgate

keyless entry system transmitter.

to make sure it is secure.

For the power liftgate operation, refer

WARNING

to Power Liftgate on page 3-22.

Be sure to watch the power liftgate as

it opens or closes, and make sure that

it closes completely:

Opening or closing the power liftgate

while not watching it move is

dangerous. Because of unseen

obstacles and the jam-safe feature, a

liftgate may not close completely and,

if left unnoticed, could result in serious

injury or death if an occupant were to

fall out of the vehicle.

Always be sure that the area around

WARNING

the liftgate is clear before activating it.

Do not drive the vehicle with the

Always confirm the safety of the area

liftgate-ajar warning indication

around the power liftgate before

displayed :

operating it electrically.

Otherwise, the liftgate may open

Not checking the area around the

unexpectedly and result in an accident.

liftgate for people before operating it

using the power liftgate switch or the

NOTE

button on the keyless entry system is

Confirm that the liftgate is securely

dangerous. A person could become

closed.

caught between the liftgate and an

Move the liftgate without pressing the

obstruction while it is opening

electric liftgate opener to verify that the

electrically or between the liftgate and

liftgate has not been left ajar.

vehicle while it is closing electrically,

resulting in an accident and serious

injury.

3-22

*Some models.

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Doors and Locks

Never allow children to operate the

NOTE

power liftgate system:

^ Do not apply unnecessary force to

Allowing children to operate the

the power liftgate when it is

power liftgate switch and the keyless

opening/closing electrically.

entry system is dangerous. Children are

Unnecessary force on the liftgate

not aware of the dangers of people

may cause it to reverse direction of

getting fingers and hands caught in a

movement automatically. Also, it

moving liftgate. If someone's neck,

could result in a malfunction.

head or hands get caught in a closing

^ The power liftgate may not open/

door, it could result in death or serious

close electrically if the vehicle is

injury.

parked on an incline, or there is

strong wind, or the liftgate is laden

CAUTION

with snow.

^ If a power liftgate system fuse has

¾ When closing the power liftgate,

blown, the liftgate cannot be opened

make sure there are no foreign

using the power liftgate switch or the

objects around the striker. If foreign

electric liftgate opener. Use the

objects are obstructing the striker,

emergency lever to open the liftgate.

the liftgate may not close properly.

^ Fully close the power liftgate before

disconnecting the vehicle battery. If

the battery is disconnected with the

liftgate open, it cannot be opened or

closed automatically after the battery

is reconnected. If this happens, fully

close the liftgate manually to restore

the auto full open/close function.

^ If the liftgate is snow-laden, remove

the snow before operating the power

liftgate. Operating the power liftgate

1. Striker

with excessive force applied to the

liftgate may damage the liftgate.

¾ Do not install accessories to the

power liftgate other than specified

Operation using the transmitter

accessories. Otherwise, it cannot be

When the power liftgate button on the

opened/closed automatically and

transmitter is pressed and held for

could result in a malfunction.

about 1 second or longer with all of

¾ Be careful when switching the power

the following conditions met, the

liftgate from electrical to manual

hazard warning lights flash 2 times, a

operation. The power liftgate may

beep sound is activated, and the

open/close unexpectedly depending

liftgate automatically opens/closes

on its position which could result in

fully.

injury.

^ The ignition is switched OFF.

^ The vehicle is stopped.

Refer to Transmitter on page 3-5.

3-23

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Doors and Locks

NOTE

Closing the liftgate

^ When opening the liftgate by

^ The vehicle is stopped.

pressing the power liftgate button on



(Manual transmission)

the transmitter, the liftgate can be

The ignition is switched to a position

opened even when it is locked.

other than ON, or when the parking

^ If the power liftgate button on the

brake is applied with the shift lever in

transmitter is pressed while the

N and the ignition switched ON.

liftgate is opening/closing



(Automatic transmission)

electrically, the beep is activated and

The ignition is switched to a position

the liftgate stops. When pressing the

other than ON, or the selector lever

power liftgate button again, the

is in P with the ignition switched ON.

liftgate moves in the reverse

direction.

NOTE

If the shift lever/selector lever is shifted

Operation using switch only for

to another position and the vehicle is

power liftgate

moved while the liftgate is opening/

Operation conditions

closing automatically, the liftgate

operates as follows:

Opening the liftgate

If the vehicle has satisfied all the

^ When the liftgate is opening

following operation conditions, the

A beep sound is activated, and the

power liftgate can be opened using the

liftgate moves in the reverse

power function.

direction automatically and closes.

^ When the liftgate is closing

^ All doors and the liftgate are

A beep sound is activated, but the

unlocked.

liftgate continues to close.

^ The vehicle is stopped.



(Manual transmission)

The ignition is switched to a position

other than ON, or when the parking

brake is applied with the shift lever in

N and the ignition switched ON.



(Automatic transmission)

The ignition is switched to a position

other than ON, or the selector lever

is in P with the ignition switched ON.

3-24

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Doors and Locks

Operation from the driver's seat (To

Operation from outside (To close)

open/close)

Press the power liftgate close switch

Press the power liftgate switch for

while the liftgate is fully opened. The

about 1 second or longer while the

hazard warning lights flash twice and

liftgate is in the fully closed/open

the liftgate closes automatically after

position. The hazard warning lights

the beep sound is heard.

flash twice and the liftgate opens/

(With the advanced keyless function)

closes fully after a sound is activated.

Operation from outside (To open)

(Without the advanced keyless

Press the electric liftgate opener on the

function)

liftgate. The hazard warning lights flash

twice and the liftgate opens

automatically after the beep sound is

heard.

(With the advanced keyless function)

A locked liftgate can also be opened

while the key is being carried.

Operation using door-lock switch

(With the advanced keyless function)

When the door-lock switch on the

liftgate is pressed, the liftgate fully

closes automatically after all the doors,

fuel-filler lid, and the liftgate are

locked.

For details such as the operation

conditions, refer to Locking, Unlocking

with Door-Lock Switch on page 3-16.

3-25

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Doors and Locks

Automatic open/close stop function

(With the advanced keyless function)

When the door-lock switch on the

The liftgate can be stopped at a

liftgate is pressed, the liftgate

desired position while it is opening/

automatically closes.

closing automatically.

Changing the power liftgate fully

Stopping the liftgate

open position

If any of the following operations is

The power liftgate fully-open position

done while the liftgate is opening/

can be changed according to the

closing automatically, the liftgate is

height of a garage.

stopped.

When changing the position

^ The power liftgate button on the

transmitter is pressed.

1. Stop the liftgate at the desired

^ The power liftgate switch is pressed.

position.

^ The electric liftgate opener on the

2. Press the power liftgate close switch

liftgate is pressed.

for about three seconds.

^ The power liftgate close switch is

A beep sound is activated two

pressed.

times to indicate that the position



(With the advanced keyless

change has been completed.

function)

NOTE

The door-lock switch on the liftgate

Set the desired fully-open position of

is pressed.

the liftgate at the position where it is

open more than halfway. The position

NOTE

where it is less than halfway open

The liftgate cannot be stopped in the

cannot be set.

area about 20 cm (7.9 in) away from

the fully-closed position. It moves in

To reset

the close direction by the load weight

1. Open the liftgate.

of the liftgate itself.

2. Press the power liftgate close switch

Moving the liftgate again

for about seven seconds.

A beep sound is activated three

If any of the following operations is

times to indicated that the reset has

done, the liftgate moves in the

been completed.

direction opposite to the direction it

was moving before it stopped.

NOTE

After about 3 seconds have elapsed

^ The power liftgate button on the

since the switch was pressed, a beep

transmitter is pressed for about 1

sound is activated 2 times to indicate

second or longer.

that the liftgate fully-open position has

^ The power liftgate switch is pressed

changed. Continuously press the

for about 1 second or longer.

switch for about 7 seconds to

^ The electric liftgate opener on the

complete the reset.

liftgate is pressed.

^ The power liftgate close switch is

pressed.

3-26

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Doors and Locks

Jam-safe equipment

CAUTION

While the power liftgate is opening/

Sensors are installed on both ends of

closing electrically and the system

the power liftgate. Be careful not to

detects a person or an object in the

allow the sensors to be scratched or

liftgate's path, the liftgate will move in

damaged by sharp objects, otherwise

the reverse direction automatically and

the liftgate may no longer open/close

stops.

automatically. In addition, if the sensor

is damaged while the liftgate is closing

WARNING

automatically, the system will stop.

Always check the area around the

power liftgate before opening/closing

it:

Not checking for occupants and

objects around the power liftgate

before opening/closing it is

dangerous. The jam-safe equipment is

designed to prevent jamming in the

event an obstruction is in the liftgate's

path. The system may not detect

certain objects obstructing the liftgate

depending on the way they are

1. Sensor

positioned and their shape. However,

if the jam-safe function detects an

NOTE

obstruction and moves the liftgate in

The jam-safe equipment does not

the reverse direction, an occupant in

activate during easy closure operation

the liftgate's path could be seriously

when the power liftgate is between the

injured.

near-shut position and fully closed

position.

When the power liftgate is moving in

the open/close direction and an

obstruction is detected, the beep

sound will be heard and the liftgate

moves in the reverse direction and

stops.

Liftgate easy closure

The Easy Closure system automatically

closes the liftgate completely from the

near-shut position.

This system also operates when the

liftgate is closed manually.

3-27

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Doors and Locks

WARNING

CAUTION

¾ Make sure the luggage compartment

When closing a liftgate, always keep

cover is firmly secured. If it is not

hands and fingers away from the

firmly secured, it could unexpectedly

liftgate:

disengage resulting in injury.

Placing hands or fingers around a

liftgate is dangerous because the

The luggage compartment can be

liftgate closes automatically from the

accessed by opening the liftgate when

near-shut position, which could cause

the straps are attached to the sides of

hands and fingers to be pinched and

the liftgate.

injured.

NOTE

^ If the electric liftgate opener is

pressed while the easy closure

function is operating, the liftgate can

be opened.

^ If the liftgate is opened/closed

repeatedly in a short period of time,

the easy closure function may not

operate. Wait for about 2 seconds

and then try again.

▼ Luggage Compartment

Luggage compartment cover*

WARNING

Do not place anything on top of the

cover:

Placing luggage or other cargo on top

of the luggage compartment cover is

dangerous. During sudden braking or a

collision, the cargo could become a

projectile that could hit and injure

someone.

Make sure luggage and cargo are

secured before driving:

Not securing cargo while driving is

dangerous as it could move or be

crushed during sudden braking or a

collision and cause injury.

3-28

*Some models.

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Doors and Locks

Removing the luggage compartment

cover

This cover can be removed for more

room.

1. Remove the straps from the hooks.

2. Press the luggage compartment

cover upward from near the pins

and remove the luggage

compartment cover from the pins.

1. Pin

3. Lift the front end of the luggage

compartment cover and remove it.

3-29

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Fuel and Emission

Fuel and Engine Exhaust Precautions

▼ Fuel Requirements

Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED

FUEL, which will reduce exhaust emissions and keep spark plug fouling to a

minimum.

To achieve maximum engine performance, use the specified fuel.

Fuel

Octane Rating^*1 (Anti-knock index)

Regular unleaded fuel

87 [(R+M)/2 method] or above (91 RON or above)

^*1

U.S. federal law requires that octane ratings be posted on gas station pumps.

Fuel with a rating lower than 87 octane (91 RON) will negatively affect the emission

control system performance and could also cause engine knocking and serious

engine damage.

CAUTION

¾ USE ONLY UNLEADED FUEL.

Leaded fuel is harmful to the catalytic converter and oxygen sensors and will lead

to deterioration of the emission control system and or failures.

¾ This vehicle can only use oxygenated fuels containing no more than 10 % ethanol

by volume. Damage to the vehicle may occur when ethanol exceeds this

recommendation, or if the gasoline contains any methanol. Stop using gasohol of

any kind if your vehicle engine is performing poorly.

¾ Never add fuel system additives other than a Mazda genuine product, otherwise

the emission control system could be damaged. Consult an Authorized Mazda

Dealer for details.

Gasoline blended with oxygenates such as alcohol or ether compounds are generally

referred to as oxygenated fuels. The common gasoline blend that can be used with

your vehicle is ethanol blended at no more than 10 %. Gasoline containing alcohol,

such as ethanol or methanol, may be marketed under the name "Gasohol".

Vehicle damage and drivability problems resulting from the use of the following may

not be covered by the warranty.

^ Gasohol containing more than 10 % ethanol.

^ Gasoline or gasohol containing methanol.

^ Leaded fuel or leaded gasohol.

3-30

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Fuel and Emission

▼ Emission Control System

NOTE

This vehicle is equipped with an

^ Under U.S. federal law, any

emission control system (the catalytic

modification to the

converter is part of this system) that

original-equipment emission control

enables the vehicle to comply with

system before the first sale and

existing exhaust emissions

registration of a vehicle is subject to

requirements.

penalties. In some states, such

modification made on a used vehicle

WARNING

is also subject to penalties.

^ While the engine is off, the sound of

Never park over or near anything

a valve opening and closing can be

flammable:

heard at the rear of the vehicle,

Parking over or near anything

however this does not indicate an

flammable, such as dry grass, is

abnormality. The vehicle has a

dangerous. Even with the engine

self-checking device and it operates

turned off, the exhaust system remains

while the engine is off.

very hot after normal use and could

▼ Engine Exhaust (Carbon

ignite anything flammable. A resulting

monoxide)

fire could cause serious injury or death.

WARNING

CAUTION

Ignoring the following precautions

Do not drive your vehicle if you smell

could cause lead to accumulate on the

exhaust gas inside the vehicle:

catalyst inside the converter or cause

Engine exhaust gas is dangerous. This

the converter to get very hot. Either

gas contains carbon monoxide (CO),

condition will damage the converter

which is colorless, odorless, and

and cause poor performance.

poisonous. When inhaled, it can cause

loss of consciousness and death. If you

¾ USE ONLY UNLEADED FUEL.

smell exhaust gas inside the vehicle,

¾ Do not drive your Mazda with any

keep all windows fully open and

sign of engine malfunction.

contact an Authorized Mazda Dealer

¾ Do not coast with the ignition

immediately.

switched off.

¾ Do not descend steep grades in gear

Do not run the engine when inside an

with the ignition switched off.

enclosed area:

¾ Do not operate the engine at high

Running the engine inside an enclosed

idle for more than 2 minutes.

area, such as a garage, is dangerous.

¾ Do not tamper with the emission

Exhaust gas, which contains poisonous

control system. All inspections and

carbon monoxide, could easily enter

adjustments must be made by a

the cabin. Loss of consciousness or

qualified technician.

even death could occur.

¾ Do not push-start or pull-start this

vehicle.

3-31

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Fuel and Emission

Open the windows or adjust the

Fuel-Filler Lid and Cap

heating or cooling system to draw

fresh air when idling the engine:

▼ Fuel-Filler Lid and Cap

Exhaust gas is dangerous. When the

vehicle is stopped with the windows

closed and the engine running for a

WARNING

long time even in an open area,

exhaust gas, which contains poisonous

When removing the fuel-filler cap,

carbon monoxide, could enter the

loosen the cap slightly and wait for

cabin. Loss of consciousness or even

any hissing to stop, then remove it:

death could occur.

Fuel spray is dangerous. Fuel can burn

skin and eyes and cause illness if

Clear snow from underneath and

ingested. Fuel spray is released when

around your vehicle, particularly the

there is pressure in the fuel tank and

tail pipe, before starting the engine:

the fuel-filler cap is removed too

Running the engine when a vehicle is

quickly.

stopped in deep snow is dangerous.

The exhaust pipe could be blocked by

Before refueling, stop the engine, and

the snow, allowing exhaust gas to

always keep sparks and flames away

enter the cabin. Because exhaust gas

from the filler neck:

contains poisonous carbon monoxide,

Fuel vapor is dangerous. It could be

it could cause loss of consciousness or

ignited by sparks or flames causing

even death to occupants in the cabin.

serious burns and injuries.

Additionally, use of the incorrect

fuel-filler cap or not using a fuel-filler

cap may result in a fuel leak, which

could result in serious burns or death

in an accident.

Do not continue refueling after the

fuel pump nozzle shuts off

automatically:

Continuing to add fuel after the fuel

pump nozzle has shut off automatically

is dangerous because overfilling the

fuel tank may cause fuel overflow or

leakage. Fuel overflow and leakage

could damage the vehicle and if the

fuel ignites it could cause a fire and

explosion resulting in serious injury or

death.

3-32

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Fuel and Emission

^ However, when the driver's door

CAUTION

is locked using the following

¾ Always use only a genuine Mazda

functions, the fuel lid is also

fuel-filler cap or an approved

locked at the same time.

equivalent, available at an

^ Auto lock/unlock function

Authorized Mazda Dealer. The

(page 3-18)

wrong cap can result in a serious

^ Auto re-lock function (page

malfunction of the fuel and emission

3-5) and (page 3-13)

control systems.

Press the location shown in the

(U.S.A. and Canada)

illustration and open the fuel lid.

It may also cause the check engine

light in the instrument cluster to

illuminate.

¾ When using an automatic car wash

or a high water pressure car washer,

lock the driver's door. Otherwise,

the fuel-filler lid may open

unexpectedly and could be

damaged.

▼ Refueling

To remove the fuel-filler cap, turn it

counterclockwise.

Before refueling, close all the doors,

Attach the removed cap to the

windows, and liftgate, and switch the

inner side of the fuel-filler lid.

ignition OFF.

1. Using the following, unlock the

driver’s door.

^ Transmitter (page 3-16)

^ Touch sensor (page 3-13)

^ Door-lock switch (page 3-16)

^ Auto lock/unlock function (page

3-18)

NOTE

^ When unlocking the driver's

door, the fuel lid is also unlocked

1. Fuel-filler lid

at the same time.

2. Fuel-filler cap

^ When locking the driver's door,

the fuel lid is locked after 90

Insert the refueling nozzle all the

seconds.

way and begin refueling. Pull out

^ The time until the fuel lid is

the refueling nozzle after the

locked after locking the driver's

refueling stops automatically.

door can be changed.

To close the fuel-filler cap, turn it

Refer to the Settings section in

clockwise until a click is heard.

the Mazda Connect Owner's

Manual.

3-33

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Fuel and Emission

7. To close, press the fuel-filler lid

until a click sound is heard.

8. Make sure to lock all the doors

when leaving the vehicle.

NOTE

Lock the doors after closing the

fuel-filler lid.

If the fuel-filler lid is closed after

locking the doors, the fuel-filler lid

cannot be locked.

CAUTION

(U.S.A. and Canada)

If the check fuel cap warning light

illuminates, the fuel-filler cap may not

be properly installed. If the warning

light illuminates, park your vehicle

safely off the right-of-way, remove the

fuel-filler cap and reinstall it correctly.

After the cap has been correctly

installed, the fuel cap warning light

may continue to illuminate until a

number of driving cycles have been

completed. A drive cycle consists of

starting the engine (after four or more

hours with the engine off) and driving

the vehicle on city and highway roads.

Continuing to drive with the check fuel

cap warning light illuminated could

cause the check engine light to

illuminate as well.

3-34

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Mirrors

Press the adjustment switch to

Mirrors

adjust the angle of the outside

mirror.

▼ Mirrors

Before driving, adjust the inside and

outside mirrors.

▼ Outside Mirrors

WARNING

Be sure to look over your shoulder

before changing lanes:

Changing lanes without taking into

account the actual distance of the

vehicle in the convex mirror is

dangerous. You could have a serious

accident. What you see in the convex

mirror is closer than it appears.

Mirror type

Flat type (driver's side)

Indicator light

Flat surface mirror.

Select switch

Convex type (front passenger side)

Adjustment switch

The mirror has single curvature on its

surface.

After adjusting the angle of the outside

mirror, press the select switch for the

Power mirror adjustment

outside mirror to be adjusted to turn

The ignition must be switched to ACC

off the indicator light.

or ON position.

NOTE

To adjust:

(With driving position memory

1. Press the select switch for the

function)

outside mirror to be adjusted to

The on-road outside mirror position

turn on the indicator light.

can be programmed in conjunction

with the driving position memory

function.

Refer to Driving Position Memory on

page 2-10.

Power mirrors with reverse tilt down

function*

The outside mirrors tilt downward to

facilitate the view of the lower area on

each side of the vehicle.

1. Switch the ignition ON.

*Some models.

3-35

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Mirrors

2. Press the select switch for the

Engine-off outside mirror operation

outside mirror to be tilted

The outside mirrors can be operated

downward to turn on the indicator

for about 40 seconds after the ignition

light of the select switch.

is switched from ON to off.

3. Shift the shift lever/selector lever to

the R position to tilt the outer

Driver's side auto-dimming outside

mirror on the side where the select

mirror*

button was pressed downward.

The movement of the auto-dimming

NOTE

outside mirror is interlocked with the

When any of the following condition is

auto-dimming rearview mirror in the

met, the outer mirrors return to their

interior to automatically reduce glare

normal positions.

from rear on-coming vehicles.

Refer to Rearview Mirror on page

^ The ignition is switched to a position

3-37.

other than ON.

^ The shift lever/selector lever is

NOTE

shifted to a position other than R.

The front passenger-side outside

^ The select switch is pressed again.

mirror does not have the

auto-dimming feature.

Folding outside mirror

WARNING

Always return the outside mirrors to

the driving position before you start

driving:

Driving with the outside mirrors folded

in is dangerous. Your rear view will be

restricted, and you could have an

accident.

Manually fold the outside mirror

rearward until it is flush with the

vehicle.

3-36

*Some models.

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Mirrors

▼ Rearview Mirror

Reducing glare from headlights

Manual day/night mirror

WARNING

Push the day/night lever forward for

day driving. Pull it back to reduce glare

Do not stack cargo or objects higher

of headlights from vehicles at the rear.

than the seatbacks:

Cargo stacked higher than the

seatbacks is dangerous. It can block

your view in the rearview mirror, which

might cause you to hit another car

when changing lanes.

Rearview mirror adjustment

Before driving, adjust the rearview

mirror to center on the scene through

the rear window.

1. Day/Night lever

2. Night

3. Day

Auto-dimming mirror

The auto-dimming mirror

automatically reduces the glare of

headlights from vehicles at the rear

when the ignition is switched ON.

(With ON/OFF button)

Press the ON/OFF button ( ) to cancel

the auto-dimming function. The

indicator light will turn off.

NOTE

To reactivate the auto-dimming

For the manual day/night mirror,

function, press the ON/OFF button

perform the adjustment with the day/

(

). The indicator light will illuminate.

night lever in the day position.

1. ON/OFF button

2. Indicator light

3-37

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Mirrors

NOTE

^ Do not use glass cleaner or suspend

objects on or around the light

sensor. Otherwise, light sensor

sensitivity will be affected and may

not operate normally.

1. Light sensor



(With Homelink wireless control

system)

For information regarding the 3

buttons ( ,

) on the

auto-dimming mirror.

Refer to HomeLink Wireless Control

System on page 4-57.

^ The auto-dimming function is

canceled when the ignition is

switched ON and the shift lever/

selector lever is in the R position.

3-38

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Windows

Do not let a child put a hand or head

Power Windows

out of the window while driving the

vehicle:

▼ Power Windows

If the person's hand or head hits

The windows can be opened/closed

something outside the vehicle, or

by operating the power window

sudden braking is applied, it could

switches.

result in serious injury or death.

WARNING

NOTE

When driving with only 1 of the rear

Make sure the opening is clear before

windows open, your ears might

closing a window:

experience a resonating sound.

Closing a power window is dangerous.

However, this does not indicate a

A person's hands, head, or even neck

problem. The sound can be reduced

could be caught by the window and

by slightly opening a front window or

result in serious injury or even death.

by changing the size of the rear

This warning applies especially to

window opening.

children.

Never allow children to play with

power window switches:

Power window switches that are not

locked with the power window lock

switch would allow children to operate

power windows unintentionally, which

could result in serious injury if a child's

hands, head or neck becomes caught

by the window.

Make sure nothing blocks the window

just before it reaches the fully closed

position or while fully holding up the

power window switch:

Blocking the power window just before

it reaches the fully closed position or

while fully holding up the power

window switch is dangerous.

In this case, the jam-safe function may

not prevent the window from closing

all the way. If fingers are caught,

serious injuries could occur.

3-39

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Windows

▼ Opening/Closing Windows

9. Unlocked position

The window opens while the switch is

Front passenger's window switch/

pressed and it closes while the switch

Rear window switches

is pulled up with the ignition switched

ON. Do not open or close 3 or more

windows at the same time.

The front passenger's window and rear

windows can be opened/closed when

the power window lock switch on the

driver's door is in the unlocked

position. Keep this switch in the locked

1. Close

position while children are in the

2. Open

vehicle.

NOTE

Master control switches

^ A power window may no longer

open/close if you continue to press

the switch for a long time. If the

power window does not open/

close, wait for a while and then

operate the switch again.

^ The passenger windows may be

opened or closed using the master

control switches on the driver's door.

^ The power window can be operated

for about 40 seconds after the

ignition is switched from ON to ACC

or off with all doors closed. If any

door is opened, the power window

will stop operating.

▼ Auto-opening/Closing

To fully open the window

automatically, press the switch

completely down, then release. The

window will fully open automatically.

To fully close the window

Close

automatically, pull the switch

Open

completely up, then release. The

Front passenger's window

window will fully close automatically.

Right rear window

Power window lock switch

To stop the window partway, pull or

Left rear window

press the switch in the opposite

Driver's window

direction and then release it.

Locked position

3-40

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Windows

NOTE



(A window cannot be closed)

Power window system initialization

If the jam-safe function has operated

procedure

and the window cannot be closed,

If you operate the switch any number

check around the window frame for

of times with the power window not

a foreign object.

fully closed, the window may no longer

If there is no foreign object around

fully open/close automatically.

the window frame, forcibly close a

The power window auto function will

window using the following

only resume on a power window that

procedure.

has been reset.

After switching the ignition OFF,

1. Switch the ignition ON.

wait for 45 seconds or longer.

2. Make sure that the power window

Switch the ignition ON.

lock switch located on the driver's

Operate the switch in the

door is not depressed.

direction to close the window

3. Press the switch and fully open the

until the jam-safe function

window.

operates and the window stops.

4. Pull up the switch to fully close the

Repeat this operation a total of 5

window and continue holding the

times.

switch for about 2 seconds after the

Continue pulling up the switch to

window fully closed.

fully close the window.

5. Make sure that the power windows

operate correctly using the door

switches.

▼ Jam-safe Window

When the window is closing and a

foreign object is detected between the

window and the window frame, the

window stops closing and

automatically opens partway.

NOTE

^ The jam-safe function may operate

under the following conditions:

^ A strong impact is detected while

the window is closing.

^ The window is closing in very low

temperatures.

3-41

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Windows

Make sure nothing blocks the

Moonroof*

moonroof just before it reaches the

fully closed position:

▼ Moonroof

Blocking the moonroof just before it

The moonroof can be opened or

reaches the closed position is

closed when operating the overhead

dangerous.

tilt/slide switch at the front seats.

In this case, the jam-safe function

cannot prevent the moonroof from

WARNING

closing. If fingers are caught, serious

injuries could occur.

Do not let passengers stand up or

extend part of the body through the

CAUTION

open moonroof while the vehicle is

moving:

¾ Do not sit on or put heavy items on

Extending the head, arms, or other

the area where the moonroof opens

parts of the body through the

and closes. Otherwise, the

moonroof is dangerous. The head or

moonroof could be damaged.

arms could hit something while the

¾ Do not open or close the moonroof

vehicle is moving. This could cause

forcefully during freezing

serious injury or death.

temperatures or snowfall. Otherwise,

the moonroof could be damaged.

Never allow children to play with the

¾ The sunshade does not tilt. To avoid

tilt/slide switch:

damaging the sunshade, do not push

The tilt/slide switch would allow

it up.

children to operate the moonroof

¾ Do not close the sunshade while the

unintentionally, which could result in

moonroof is opening. Trying to force

serious injury if a child's hands, head

the sunshade closed could damage

or neck becomes caught by the

it.

moonroof.

Make sure the opening is clear before

closing the moonroof:

A closing moonroof is dangerous. The

hands, head, or even neck of a person,

especially a child, could be caught in it

as it closes, causing serious injury or

even death.

3-42

*Some models.

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Windows

▼ Tilt/Slide Operation

Tilt Operation

The moonroof can be opened or

The rear of the moonroof can be tilted

closed electrically only when the

open to provide more ventilation.

ignition is switched ON.

To fully tilt automatically, momentarily

^ Before leaving the vehicle or washing

press the tilt/slide switch.

your Mazda, make sure the

To fully close automatically,

moonroof is completely closed so

momentarily press the tilt/slide switch

that water does not get inside the

in the forward direction.

cabin area.

To stop tilting partway, press the tilt/

^ After washing your Mazda or after it

slide switch.

rains, wipe the water off the

When the moonroof is already slid

moonroof before operating it to

open and you want to tilt it open, first

avoid water penetration which could

close the moonroof and then do a tilt

cause rust and water damage to your

operation.

headliner.

1. Tilt up

2. Close (Tilt down)

1. Tilt/Slide switch

3-43

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Windows

Slide Operation

▼ Jam-safe Moonroof

To fully open automatically,

If a person's hands, head or an object

momentarily press the tilt/slide switch

blocks the moonroof while it is closing,

in the backward direction.

the moonroof will stop and move in

To fully close automatically,

the open direction.

momentarily press the tilt/slide switch

NOTE

in the forward direction.

To stop sliding partway, press the tilt/

^ The jam-safe function may operate

slide switch.

under the following conditions:

When the moonroof is already tilted

^ A strong impact is detected while

open and you want to slide it open,

the moonroof is closing

first close the moonroof and then do a

automatically.

slide operation.

^ The moonroof is closing

automatically during very low

temperatures.

^ In the event the jam-safe function

activates and the moonroof cannot

be closed automatically, press the

tilt/slide switch and the moonroof

will close.

^ The jam-safe moonroof function

does not operate until the system has

1. Open

been reset.

2. Close

▼ Sunshade

NOTE

If the moonroof does not operate

The sunshade can be opened and

normally, do the following procedure:

closed by hand.

1. Switch the ignition ON.

2. Press the tilt switch, to partially tilt

The sunshade opens at the same time

open the rear of the moonroof.

as the moonroof slides open, but it

3. Repeat Step 2. The rear of the

must be closed by hand.

moonroof tilts open to the fully

open position, then closes a little.

If the reset procedure is performed

while the moonroof is in the slide

position (partially open) it will close

before the rear tilt opens.

1. Sunshade

3-44

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Security System

Modification and

Immobilizer System

Add-On Equipment

▼ Immobilizer System

▼ Modification and Add-On

The immobilizer system allows the

Equipment

engine to start only with a key the

system recognizes.

Mazda cannot guarantee the

immobilizer and the theft-deterrent

If someone attempts to start the

system's operation if the system has

engine with an unrecognized key, the

been modified or if any add-on

engine will not start, thereby helping to

equipment has been installed.

prevent vehicle theft.

If you have a problem with the

CAUTION

immobilizer system or the key, consult

To avoid damage to the vehicle, do not

an Authorized Mazda Dealer.

modify the system or install any add-on

equipment to the immobilizer and the

CAUTION

theft-deterrent systems or the vehicle.

¾ Radio equipment like this is

governed by laws in the United

States.

Changes or modifications not

expressly approved by the party

responsible for compliance could

void the user's authority to operate

the equipment.

¾ To avoid damage to the key, do not:

¾ Drop the key.

¾ Get the key wet.

¾ Expose the key to any kind of

magnetic field.

¾ Expose the key to high

temperatures on places such as the

dashboard, under direct sunlight.

¾ If the engine does not start with the

correct key, and the security indicator

light keeps illuminating or flashing,

the system may have a malfunction.

Consult an Authorized Mazda

Dealer.

3-45

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Security System

NOTE

Arming

^ The keys carry a unique electronic

The system is armed when the ignition

code. For this reason, and to assure

is switched from ON to off.

your safety, obtaining a replacement

The security indicator light in the

key requires some waiting time. They

instrument cluster flashes every 2

are only available through an

seconds until the system is disarmed.

Authorized Mazda Dealer.

^ Always keep a spare key in case one

is lost. If a key is lost, consult an

Authorized Mazda Dealer as soon as

possible.

^ If you lose a key, an Authorized

Mazda Dealer will reset the

Disarming

electronic codes of your remaining

The system is disarmed when the

keys and immobilizer system. Bring

ignition is switched ON with the

all the remaining keys to an

correct programmed key. The security

Authorized Mazda Dealer to reset.

indicator light illuminates for about 3

Starting the vehicle with a key that

seconds and then turns off.

has not been reset is not possible.

If the engine does not start with the

▼ Operation

correct key, and the security indicator

light remains illuminated or flashing,

NOTE

try the following:

Make sure the key is within the

^ The engine may not start and security

operational range for signal

indicator light may illuminate or flash

transmission. Switch the ignition off,

if the key is placed in an area where

and then restart the engine. If the

it is difficult for the system to detect

engine does not start after 3 or more

the signal, such as on the dashboard

tries, contact an Authorized Mazda

or in the glove compartment. Move

Dealer.

the key to a location within the signal

range, switch the ignition off, and

then restart the engine.

^ Signals from a TV or radio station, or

from a transceiver or mobile

telephone could interfere with your

immobilizer system. If you are using

the proper key and the engine fails to

start, check the security indicator

light.

3-46

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Security System

NOTE

Theft-Deterrent System*

^ If the battery goes dead while the

▼ Theft-Deterrent System

theft-deterrent system is armed, the

horn will activate and the hazard

If the theft-deterrent system detects an

warning lights will flash when the

inappropriate entry into the vehicle,

battery is charged or replaced.

which could result in the vehicle or its

contents being stolen, the alarm alerts

▼ How to Arm the System

the surrounding area of an abnormality

Close the windows and the

by sounding the horn and flashing the

hazard warning lights.

moonroof* securely.

Switch the ignition OFF.

The system will not function unless it's

Make sure the hood, the doors,

properly armed. So when you leave the

and the liftgate are closed.

vehicle, follow the arming procedure

Press the lock button on the

correctly.

transmitter.

The hazard warning lights will flash

▼ Operation

once.

The following method will also arm

System triggering conditions

the theft-deterrent system:

The horn sounds intermittently and the

Press the door-lock switch “

”

hazard warning lights flash for about

while any door is open and then

30 seconds when the system is

close all of the doors.

triggered by any one of the following:

(With the advanced keyless

^ Unlocking a door with the auxiliary

function)

key, door lock switch, or an inside

Touch the sensing area of the door

door-lock knob.

lock touch sensor.

^ Forcing open a door, the hood or the

liftgate.

The security indicator light in the

^ Opening the hood by operating the

instrument cluster flashes twice per

hood release handle.

second for 20 seconds.

^ Switching the ignition ON without

using the push button start.

If the system is triggered again, the

lights and horn will activate until the

driver's door or the liftgate is unlocked

After 20 seconds, the system is fully

with the transmitter.

armed.

(With the advanced keyless function)

The lights and horn can also be

deactivated by touching the sensing

area of the door release touch sensor.

*Some models.

3-47

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Security System

NOTE

When the doors are unlocked by

^ The theft-deterrent system can also

pressing the unlock button on the

be armed by activating the auto

transmitter while the theft-deterrent

relock function with all the doors,

system is turned off, the hazard

the liftgate and the hood closed.

warning lights will flash twice to

Refer to Transmitter on page 3-5.

indicate that the system is turned off.

^ The system will disarm if one of the

following operations takes place

▼ To Stop the Alarm

within 20 seconds after pressing the

A triggered alarm can be turned off

lock button:

using any one of the following

^ Unlocking any door.

methods:

^ Opening any door.



Pressing the unlock button on the

^ Opening the hood.

transmitter.

^ Switching the ignition ON.

^ Starting the engine with the push

To rearm the system, do the arming

button start.

procedure again.



(With the advanced keyless

^ When the doors are locked by

function)

pressing the lock button on the

^ Touching the sensing area of the

transmitter while the theft-deterrent

door release touch sensor.

system is armed, the hazard warning

^ Pressing the electric liftgate opener

lights will flash once to indicate that

while the key is being carried.

the system is armed.

The hazard warning lights will flash

▼ To Turn Off an Armed System

twice.

An armed system can be turned off

using any one of the following

methods:

^ Pressing the unlock button on the

transmitter.

^ Starting the engine with the push

button start.



(With the advanced keyless

function)

^ Touching the sensing area of the

door release touch sensor.

The hazard warning lights will flash

twice.

3-48

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Before Driving

Driving Tips

Break-In Period

Saving Fuel and

Protection of the

▼ Break-In Period

Environment

No special break-in is necessary, but a

few precautions in the first 1,000 km

▼ Saving Fuel and Protection of the

(600 miles) may add to the

Environment

performance, economy, and life of the

vehicle.

How you operate your Mazda

determines how far it will travel on a

^ Do not race the engine.

tank of fuel. Use these suggestions to

^ Do not maintain one constant

help save fuel and reduce CO2.

speed, either slow or fast, for a long

period of time.

^ Avoid long warm-ups. Once the

^ Do not drive constantly at

engine runs smoothly, begin driving.

full-throttle or high engine rpm for

^ Avoid fast starts.

extended periods of time.

^ Drive at lower speeds.

^ Avoid unnecessary hard stops.

^ Anticipate when to apply the brakes

^ Avoid full-throttle starts.

(avoid sudden braking).

^ Follow the maintenance schedule

and have an Authorized Mazda

Dealer perform inspections and

servicing.

Refer to Scheduled Maintenance

(U.S.A. and Puerto Rico) on page

6-4.

Refer to Scheduled Maintenance

(Canada) on page 6-6.

Refer to Scheduled Maintenance

(Mexico) on page 6-9.

^ Use the air conditioner only when

necessary.

^ Slow down on rough roads.

^ Keep the tires properly inflated.

^ Do not carry unnecessary weight.

^ Do not rest your foot on the brake

pedal while driving.

^ Keep the wheels in correct

alignment.

^ Keep windows closed at high

speeds.

^ Slow down when driving in

crosswinds and headwinds.

3-49

CX-30_8JP5-EA-20K_Edition1_new

2020-7-22 15:50:09

Была ли эта страница вам полезна?

Да!Нет

4 посетителя считают эту страницу полезной.

Mazda CX-30 (2021 year). Manual in english — page 4

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.