Mazda CX-30 (2021 year). Manual in english — page 14
Interior Features
Interior Equipment
Assist Grips
Rear Coat Hooks
▼ Assist Grips
▼ Rear Coat Hooks
WARNING
WARNING
Never hang heavy or sharp objects on
Never hang heavy or sharp objects on
the assist grips and coat hooks:
the assist grips and coat hooks:
Hanging heavy or sharp-ended objects
Hanging heavy or sharp-ended objects
such as a coat hanger from the assist
such as a coat hanger from the assist
grips or coat hooks is dangerous as
grips or coat hooks is dangerous as
they can fly off and hit an occupant in
they can fly off and hit an occupant in
the cabin if a curtain air bag was to
the cabin if a curtain air bag was to
deploy, which could result in serious
deploy, which could result in serious
injury or death.
injury or death.
Always hang clothes on the coat hooks
Do not use the assist grips when
and the assist grips without hangers.
getting in and out of the vehicle or
getting out of a seat:
An assist grip could break under a
heavy load resulting in injury.
Use the assist grips to support your
body while seated in the vehicle and
while the vehicle is moving.
5-42
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Interior Features
Interior Equipment
▼ Overhead Console*
Storage Compartments
This console box is designed to store
▼ Storage Compartments
eyeglasses or other accessories.
Push and release to open.
WARNING
Keep storage boxes closed when
driving:
Driving with the storage boxes open is
dangerous. To reduce the possibility of
injury in an accident or a sudden stop,
keep the storage boxes closed when
driving.
▼ Storage Pocket
When loading cargo, make sure that it
is completely secured:
To use, open the lid.
If the cargo is not completely secured,
it may move or collapse while driving
or during sudden braking, resulting in
injury or an accident.
Do not put articles in storage spaces
with no lid:
Putting articles in storage spaces with
no lid is dangerous as they could be
thrown around the cabin during
sudden braking, maneuvering, or
▼ Glove Compartment
acceleration and cause an accident
depending on how the article is stored.
To open the glove compartment, pull
the knob toward you.
CAUTION
Do not leave lighters or eyeglasses in
the storage boxes while parked under
the sun. A lighter could explode or the
plastic material in eyeglasses could
deform and crack from high
temperature.
To close the glove compartment, firmly
press in the center of the glove
compartment lid.
*Some models.
5-43
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Interior Features
Interior Equipment
▼ Center Console
NOTE
The lid can be opened/closed while it
To slide the console lid, pull the knob
is slid to the 1st and 2nd stages, but if
and slide it rearward.
the rear seatback is folded, the lid
cannot be opened/closed while it is
slid to the 2nd stage because the rear
seat (head restraint) will contact it.
Center console divider
To open the lid, pull the knob, slide
the lid rearward, and then lift up the
lid.
Small items can be placed using the
center console divider.
▼ Luggage Compartment
Cargo Securing Loops
Use the loops in the luggage
compartment to secure cargo with a
rope or net. The tensile strength of the
CAUTION
loops is 196 N (20 kgf, 44 lbf). Do not
apply excessive force to the loops as it
Do not put your hands or fingers
around the moving parts of the lid
will damage them.
when using the lid. Otherwise, your
hand or finger could get caught,
resulting in an injury.
5-44
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
6
How to keep your Mazda in top condition.
Essential Information
6-2
Brake/Clutch Fluid
6-21
Introduction
6-2
Washer Fluid
6-21
Body Lubrication
6-22
Wiper Blades
6-23
Scheduled Maintenance
6-4
Battery
6-28
Scheduled Maintenance
6-4
Key Battery Replacement
6-29
Tires
6-31
Owner Maintenance
6-12
Light Bulbs
6-35
Owner Maintenance
Fuses
6-35
Precautions
6-12
Hood
6-13
Appearance Care
6-43
Engine Compartment
Exterior Care
6-43
Overview
6-15
Interior Care
6-49
Engine Oil
6-17
Engine Coolant
6-19
6-1
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Essential Information
To continue warranty eligibility and to
Introduction
protect your investment, it is your
responsibility to properly maintain your
▼ Introduction
vehicle according to factory
Be careful not to hurt yourself when
recommended schedules outlined in
inspecting your vehicle, replacing a
this manual. As part of this you must
tire, or doing some kind of
keep your maintenance records,
maintenance such as changing the oil
receipts, repair orders and any other
and filter. In particular, wear thick work
documents as evidence this
gloves such as cotton gloves when
maintenance was performed. You must
touching areas that are difficult to see
present these documents, should any
while inspecting or working on your
warranty coverage disagreement occur.
vehicle. Doing inspections or
Failure to do so can result in your
procedures with your bare hands could
warranty being voided either in whole
cause injury.
or in part.
If you are unsure about any procedure
This evidence may consist of the
this manual describes, we strongly urge
following:
you to have a reliable and qualified
The Mazda Scheduled Maintenance
service shop perform the work,
Record, refer to the Warranty
preferably an Authorized Mazda
Booklet, must be completely filled
Dealer.
out showing mileage, repair order
number, date for each service, and
Factory-trained Mazda technicians and
signed by a qualified automotive
genuine Mazda parts are best for your
service technician who service
vehicle. Without this expertise and the
vehicles.
parts that have been designed and
Original copies of repair orders or
made especially for your Mazda,
other receipts that include the
inadequate, incomplete, and
mileage and date the vehicle was
insufficient servicing may result in
serviced. Each receipt should be
problems. This could lead to vehicle
signed by a qualified automotive
damage or an accident and injuries.
service technician.
For self maintenance, a statement
For expert advice and quality service,
that you completed the maintenance
consult an Authorized Mazda Dealer.
yourself, displaying mileage and the
date the work was performed. Also,
receipts for the replacement parts
(fluid, filters, etc.) indicating the date
and mileage must accompany this
statement.
6-2
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Essential Information
NOTE
The malfunction diagnosis connector is
If you elect to perform maintenance
designed exclusively for connecting the
yourself or have your vehicle serviced
specially designed device to perform
at a location other than an Authorized
on-board diagnosis.
Mazda Dealer, Mazda requires that all
Do not connect any devices other than
fluids, parts and materials must meet
the specially designed malfunction
Mazda standards for durability and
diagnosis devices for servicing. If any
performance as described in this
device other than the malfunction
manual.
diagnosis device is connected, it may
affect the vehicle's electrical devices or
lead to damage such as battery
Claims against the warranty resulting
depletion.
from lack of maintenance, as opposed
to defective materials or authorized
Mazda workmanship, will not be
honored.
Any auto repair shop using parts
equivalent to your Mazda's original
equipment may perform maintenance.
But we recommend that it always be
done by an Authorized Mazda Dealer
using genuine Mazda parts.
Selecting “Vehicle Status Monitor”
enables the system to notify you of
1. Malfunction diagnosis connector
your vehicle's approaching inspection/
servicing period. Refer to the
Information section in the Mazda
Connect Owner's Manual.
6-3
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Scheduled Maintenance
Scheduled Maintenance
▼ Scheduled Maintenance (U.S.A. and Puerto Rico)
Vehicles utilizing the vehicle status monitor feature:
The vehicle status monitor feature alerts you of maintenance needs by turning on the
wrench indicator light or displaying a message in the instrument panel, or both.
Every maintenance must be done when the display/wrench indication comes on.
The display/wrench indication will come on before reaching the maximum interval
of 16,000 km (10,000 miles), or 12 months (after the previous maintenance).
If you drive your vehicle under any of the following conditions, follow the Severe
Driving Scheduled Maintenance and replace the engine oil and filter every 8,000 km
(5,000 miles) or 6 months, whichever comes first.
Otherwise, follow the Normal Driving Scheduled Maintenance intervals.
1. The vehicle is idled for long periods or driven at low speeds, such as with police
cars, taxis, or driver's education school car.
2. Driving under dusty conditions.
3. Driving for long periods in cold temperatures or driving regularly for short distan-
ces only.
4. Driving under extremely high temperature conditions.
5. Driving continuously in mountainous regions.
If you are following the Severe Driving Scheduled Maintenance (8,000 km (5,000
miles) or 6 months oil replacement interval), set the vehicle status monitor manually.
Refer to the Information section in the Mazda Connect Owner's Manual. Please
contact an Authorized Mazda Dealer if necessary.
USA and Puerto Rico Residents (Normal Driving Scheduled Maintenance):
Number of times, maintenance was performed.
Maintenance Item
1
2
3
4
5
6
7
8
Engine oil & filter*1
R
R
R
R
R
R
R
R
SKYACTIV-G
Replace every 64,000 km (40,000 miles).
2.5T
Spark plugs
Except SKY-
ACTIV-G
Replace every 120,000 km (75,000 miles).
2.5T
Air filter
R
R
Drive belts
I
I
I
I
I
I
I
I
Engine coolant level
I
I
I
I
I
I
I
I
Replace at first 192,000 km (120,000 miles) or 120
Engine coolant*2
months; after that, every 96,000 km (60,000 miles) or
60 months.
Fuel lines & hoses*3
I
I
I
I
Hoses and tubes for emission*3
I
I
6-4
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Scheduled Maintenance
Number of times, maintenance was performed.
Maintenance Item
1
2
3
4
5
6
7
8
Brake lines, hoses and connections
I
I
I
I
Vacuum brake booster and
With vac-
I
I
I
I
hose
uum booster
Brake and clutch fluid level
I
I
I
I
I
I
I
I
With electri-
Brake fluid
R
R
R
R
cal booster
Disc brakes
I
I
I
I
I
I
I
I
Tire rotation
Rotate every 16,000 km (10,000 miles).
Tire inflation pressure and tire wear*4
I
I
I
I
I
I
I
I
Steering operation and linkages
I
I
I
I
Front and rear suspension, ball joints and
I
I
I
I
wheel bearing axial play
Driveshaft dust boot
I
I
I
I
Bolts and nuts on chassis and body
T
T
T
T
Exhaust system and heat shields
I
I
Replace every 48,000 km (30,000 miles) or 24
Cabin air filter
months.
Function of all lights
I
I
I
I
I
I
I
I
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
T: Tighten
Remarks:
*1
Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench
indicator light display.
*2
Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22
may cause serious damage to the engine and cooling system.
*3
According to state/provincial and federal regulations, failure to perform maintenance on these items
will not void your emissions warranties. However, Mazda recommends that all maintenance services
be performed at the recommended time or mileage/kilometer period to ensure long-term reliability.
*4
Inspect a spare tire if equipped.
6-5
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Scheduled Maintenance
USA and Puerto Rico Residents (Severe Driving Scheduled Maintenance):
Number of months or kilometers (miles), whichever comes first.
Months
6
12
18
24
30
36
42
48
× 1000 km
8
16
24
32
40
48
56
64
× 1000 miles
5
10
15
20
25
30
35
40
Engine oil & filter*1
R
R
R
R
R
R
R
R
Maintenance Interval (other than engine oil
1st
2nd
3rd
4th
& filter replacement)*2
Chart symbols:
R: Replace
Remarks:
*1
Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench
indicator light display.
*2
Follow Maintenance Interval listed in Normal Driving Scheduled Maintenance.
▼ Scheduled Maintenance (Canada)
Vehicles utilizing the vehicle status monitor feature:
The vehicle status monitor feature alerts you of engine oil replacement by turning on
the wrench indicator light or displaying a message in the instrument panel, or both.
Every engine oil replacement must be done when the display/wrench indication
comes on. The display/wrench indication will come on before reaching the maxi-
mum interval of 16,000 km (10,000 miles), or 12 months (after the previous main-
tenance).
If you are following 8,000 km (5,000 miles) or 6 months maintenance interval, set
the vehicle status monitor manually.
Refer to the owner's manual section of mazda.ca for the Mazda Connect owner's
manual or contact an Authorized Mazda Dealer if necessary.
6-6
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Scheduled Maintenance
Canada residents
Number of months or kilometers (miles), whichever comes first.
Months
6
12
18
24
30
36
42
48
54
60
66
72
Maintenance Interval
×1000 km
8
16
24
32
40
48
56
64
72
80
88
96
×1000
5
10
15
20
25
30
35
40
45
50
55
60
miles
Replace when the wrench indicator light is ON.
Engine oil & filter*1*2
(Upper limit interval is 16,000 km (10,000 miles) or 12
months.)
SKYACTIV-G
Replace every 64,000 km (40,000 miles).
2.5T
Spark plugs
Except SKY-
ACTIV-G
Replace every 120,000 km (75,000 miles).
2.5T
Air filter
Replace every 56,000 km (35,000 miles) or 36 months.
Drive belts*3
I
I
Engine coolant level
I
I
I
I
I
I
I
I
I
I
I
I
Replace at first 192,000 km (120,000 miles) or 120
Engine coolant*4
months; after that, every 96,000 km (60,000 miles) or 60
months.
Fuel lines & hoses*5
I
I
I
Hoses and tubes for emission
*5
I
Brake lines, hoses and connections
I
I
I
Vacuum brake booster and
With vac-
I
I
I
I
I
I
hose
uum booster
With electri-
Brake fluid
R
R
R
cal booster
I/C
I/C
Disc brakes
I
C/L
I
I
C/L
I
/L
/L
Tire rotation
Rotate every 8,000 km (5,000 miles).
Tire inflation pressure and tire wear*6
I
I
I
I
I
I
I
I
I
I
I
I
Steering operation and linkages
I
I
I
Front and rear suspension, ball joints and
I
I
I
wheel bearing axial play
Body condition inspection for rust, corro-
I
I
I
I
I
I
sion and perforation
Driveshaft dust boot
I
I
I
Bolts and nuts on chassis and body
T
T
T
6-7
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Scheduled Maintenance
Number of months or kilometers (miles), whichever comes first.
Months
6
12
18
24
30
36
42
48
54
60
66
72
Maintenance Interval
×1000 km
8
16
24
32
40
48
56
64
72
80
88
96
×1000
5
10
15
20
25
30
35
40
45
50
55
60
miles
Exhaust system and heat shields
I
Cabin air filter
Replace every 40,000 km (25,000 miles) or 24 months.
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
C: Clean
L: Lubricate
T: Tighten
Remarks:
*1
Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench
indicator light display.
*2
If you drive your vehicle under any of the following conditions, replace the engine oil & filter every
8,000 km (5,000 miles) or 6 months, whichever comes first.
1. The vehicle is idled for long periods or driven at low speeds, such as with police cars, taxis, or
driver's education school vehicles.
2. Driving under dusty conditions.
3. Driving for long periods in cold temperatures or driving regularly for short distances only.
4. Driving under extremely high temperature conditions.
5. Driving continuously in mountainous regions.
*3
Also inspect the air conditioner drive belts, if equipped.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts more
often than the recommended intervals.
a) Driving under dusty conditions.
b) The vehicle is idled for long periods or driven at low speeds.
c) Driving for long periods in cold temperatures or driving regularly for short distances only.
d) Driving under extremely high temperature conditions.
e) Driving continuously in mountainous regions.
f) Driving for long period in extremely wet or heavy rain condition.
*4
Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22
may cause serious damage to the engine and cooling system.
*5
According to state/provincial and federal regulations, failure to perform maintenance on these items
will not void your emissions warranties. However, Mazda recommends that all maintenance services
be performed at the recommended time or mileage/kilometer period to ensure long-term reliability.
*6
Inspect a spare tire if equipped.
6-8
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Scheduled Maintenance
▼ Scheduled Maintenance (Mexico)
Vehicles utilizing the vehicle status monitor feature:
The vehicle status monitor feature alerts you of maintenance needs by turning on the
wrench indicator light or displaying a message in the instrument panel, or both.
Every maintenance must be done when the display/wrench indication comes on.
The display/wrench indication will come on before reaching the maximum interval
of 10,000 km, or 6 months (after the previous maintenance).
If you drive your vehicle under any of the following conditions, follow the Severe
Driving Scheduled Maintenance and replace the engine oil and filter every 5,000 km
or 3 months, whichever comes first.
Otherwise, follow the Normal Driving Scheduled Maintenance intervals.
1. The vehicle is idled for long periods or driven at low speeds, such as with police
cars, taxis, or driver's education school car.
2. Driving under dusty conditions.
3. Driving for long periods in cold temperatures or driving regularly for short distan-
ces only.
4. Driving under extremely high temperature conditions.
5. Driving continuously in mountainous regions.
If you are following the Severe Driving Scheduled Maintenance (5,000 km or 3
months oil replacement interval), set the vehicle status monitor manually.
Refer to the Information section in the Mazda Connect Owner's Manual. Please
contact an Authorized Mazda Dealer if necessary.
Mexico Residents (Normal Driving Scheduled Maintenance):
Number of times, maintenance was performed.
Maintenance Item
1
2
3
4
5
6
7
8
Engine oil & filter*1
R
R
R
R
R
R
R
R
SKYACTIV-G
I
I
I
I
I
I
I
I
2.5T
Replace every 64,000 km
Spark plugs
Except SKY-
I
I
I
I
I
I
I
I
ACTIV-G
Replace every 120,000 km.
2.5T
Air filter
R
R
R
R
Drive belts
I
I
I
I
I
I
I
I
Engine coolant level
I
I
I
I
I
I
I
I
Replace at first 192,000 km or 120 months; after that,
Engine coolant*2
every 96,000 km or 60 months.
Fuel lines & hoses*3
I
I
Hoses and tubes for emission*3
I
I
Fuel filter
Replace every 60,000 km.
6-9
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Scheduled Maintenance
Number of times, maintenance was performed.
Maintenance Item
1
2
3
4
5
6
7
8
Brake lines, hoses and connections
I
I
I
I
Vacuum brake booster and
With vacuum
I
I
I
I
hose
booster
Brake and clutch fluid level
I
I
I
I
I
I
Brake fluid
R
R
Disc brakes
I
I
I
I
I
I
I
I
Tire rotation
Rotate every 10,000 km.
Tire inflation pressure and tire wear*4
I
I
I
I
I
I
I
I
Steering operation and linkages
I
I
I
I
I
I
I
I
Front and rear suspension, ball joints and
I
I
I
I
wheel bearing axial play
Driveshaft dust boot
I
I
I
I
Bolts and nuts on chassis and body
T
T
T
T
Exhaust system and heat shields
I
I
I
I
Cabin air filter
Replace every 40,000 km or 24 months.
Function of all lights
I
I
I
I
I
I
I
I
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.
R: Replace
T: Tighten
Remarks:
*1
Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench
indicator light display.
*2
Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22
may cause serious damage to the engine and cooling system.
*3
According to state/provincial and federal regulations, failure to perform maintenance on these items
will not void your emissions warranties. However, Mazda recommends that all maintenance services
be performed at the recommended time or mileage/kilometer period to ensure long-term reliability.
*4
Inspect a spare tire if equipped.
6-10
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Scheduled Maintenance
Mexico Residents (Severe Driving Scheduled Maintenance):
Number of months or kilometers , whichever comes first.
Months
3
6
9
12
15
18
21
24
× 1000 km
5
10
15
20
25
30
35
40
Engine oil & filter*1
R
R
R
R
R
R
R
R
Maintenance Interval (other than engine oil
1st
2nd
3rd
4th
& filter replacement)*2
Chart symbols:
R: Replace
Remarks:
*1
Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench
indicator light display.
*2
Follow Maintenance Interval listed in Normal Driving Scheduled Maintenance.
6-11
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
As explained in the Introduction (page
Owner Maintenance
6-2), several procedures can be done
Precautions
only by a qualified service technician
with special tools.
▼ Owner Maintenance Precautions
Improper owner maintenance during
The owner or a qualified service
the warranty period may affect
technician should make these vehicle
warranty coverage. Refer to
inspections at the indicated intervals to
Introduction (page 6-2) for owner's
ensure safe and dependable
responsibility in protecting your
operation.
investment. For details, read the
separate Mazda Warranty statement
Bring any problem to the attention of
provided with the vehicle. If you are
an Authorized Mazda Dealer or
unsure about any servicing or
qualified service technician as soon as
maintenance procedure, have it done
possible.
by an Authorized Mazda Dealer.
When Refueling
There are strict environmental laws
Brake and clutch fluid level (page
regarding the disposal of waste oil and
6-21)
fluids. Please dispose of your waste
Engine coolant level (page 6-19)
properly and with due regard to the
Engine oil level (page 6-18)
environment.
Washer fluid level (page 6-21)
At Least Monthly
We recommend that you entrust the oil
and fluid changes of your vehicle to an
Tire inflation pressures (page 6-31)
Authorized Mazda Dealer.
At Least Twice a Year (For Example,
Every Spring and Fall)
WARNING
You can do the following scheduled
Do not perform maintenance work if
maintenance items if you have some
you lack sufficient knowledge and
mechanical ability and a few basic
experience or the proper tools and
tools and if you closely follow the
equipment to do the work. Have
directions in this manual.
maintenance work done by a
Engine coolant (page 6-19)
qualified technician:
Engine oil (page 6-18)
Performing maintenance work on a
vehicle is dangerous if not done
properly. You can be seriously injured
Improper or incomplete service may
while performing some maintenance
result in problems. This section gives
procedures.
instructions only for items that are easy
to perform.
6-12
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
If you must run the engine while
Hood
working under the hood, make
certain that you remove all jewelry
▼ Hood
(especially rings, bracelets, watches,
and necklaces) and all neckties,
scarves, and similar loose clothing
WARNING
before getting near the engine or
cooling fan which may turn on
Always check that the hood is closed
unexpectedly:
and securely locked:
Working under the hood with the
A hood that is not closed and securely
engine running is dangerous. It
locked is dangerous as it could fly open
becomes even more dangerous when
while the vehicle is moving and block
you wear jewelry, loose clothing or
the driver's vision which could result in
have long hair or a long beard.
a serious accident.
Either can become entangled in
▼ Opening the Hood
moving parts and result in injury.
1.
With the vehicle parked, pull the
release handle to unlock the hood.
Pull over to a safe location, then
switch the ignition off and make sure
the fan is not running before
attempting to work near the cooling
fan:
Working near the cooling fan when it is
running is dangerous. The fan could
continue running indefinitely even if
the engine has stopped and the engine
compartment temperature is high. You
2.
Insert your hand into the hood
could be hit by the fan and seriously
opening, slide the latch lever in the
injured.
direction of the allow as shown in
the illustration, and lift up the
Do not leave items in the engine
hood.
compartment:
After you have finished checking or
doing servicing in the engine
compartment, do not forget and leave
items such as tools or rags in the
engine compartment.
Tools or other items left in the engine
compartment could cause engine
damage or a fire leading to an
unexpected accident.
6-13
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
3. Grasp the support rod in the
3. Lower the hood slowly to a height
padded area and secure it in the
of about 20 cm (7.9 in) above its
support rod hole indicated by the
closed position and then let it drop.
arrow to hold the hood open.
CAUTION
When closing the hood, do not push it
excessively such as by applying your
weight. Otherwise, the hood could be
deformed.
1. Pad
2. Support rod
▼ Closing the Hood
1. Check under the hood area to
make certain all filler caps are in
place and all loose items (e.g.
tools, oil containers, etc.) have
been removed.
2. Lift the hood, grasp the padded
area on the support rod, and secure
the support rod in the clip. Verify
that the support rod is secured in
the clip before closing the hood.
1. Clip
6-14
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
Engine Compartment Overview
▼ Engine Compartment Overview
SKYACTIV-G 2.0 and SKYACTIV-G 2.5
1. Engine coolant reservoir
2. Engine oil dipstick
3. Brake/Clutch fluid reservoir
4. Battery
5. Fuse block
6. Cooling system cap
7. Engine oil-filler cap
8. Windshield washer fluid reservoir
6-15
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
SKYACTIV-G 2.5T
1. Engine coolant reservoir
2. Engine oil dipstick
3. Brake fluid reservoir
4. Battery
5. Fuse block
6. Cooling system cap
7. Engine oil-filler cap
8. Windshield washer fluid reservoir
6-16
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
Only use SAE 0W-20 oil “Certified For
Engine Oil
Gasoline Engines” by the American
Petroleum Institute (API).
▼ Engine Oil
Oil with this trademark symbol
conforms to the current engine and
NOTE
emission system protection standards
Changing the engine oil should be
and fuel economy requirements of the
performed by an Authorized Mazda
International Lubricant Standardization
Dealer.
and Approval Committee (ILSAC),
Refer to Introduction on page 6-2 for
comprised of U.S. and Japanese
owner's responsibility in protecting
automobile manufacturers.
your investment.
▼ Recommended Oil
U.S.A., Canada
SKYACTIV-G 2.0 and SKYACTIV-G
2.5
Use ILSAC GF-V or higher/ SAE
0W-20 engine oil.
Mazda Genuine Oil is used in your
Mazda vehicle. Mazda Genuine
SKYACTIV-G 2.5T
0W-20 Oil is required to achieve
optimum fuel economy.
Use SAE 5W-30 engine oil.
Mazda Genuine Oil is used in your
For maintenance service, Mazda
Mazda vehicle. Mazda Genuine
recommends Mazda Genuine Parts
5W-30 Oil is required to achieve
and Oil.
optimum fuel economy.
For maintenance service, Mazda
recommends Mazda Genuine Parts
and Oil.
6-17
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
Only use SAE 5W-30 oil “Certified For
(Mexico)
Gasoline Engines” by the American
SKYACTIV-G 2.0 and SKYACTIV-G
Petroleum Institute (API).
2.5
Oil with this trademark symbol
conforms to the current engine and
Use API SM or higher, or ILSAC GF-IV
emission system protection standards
or higher/SAE 5W-30 engine oil. If SAE
and fuel economy requirements of the
5W-30 engine oil is not available, use
International Lubricant Standardization
SAE 5W-20 engine oil.
and Approval Committee (ILSAC),
comprised of U.S. and Japanese
The quality designation SM, or ILSAC
automobile manufacturers.
must be on the label.
Except U.S.A., Canada
SKYACTIV-G 2.5T
Use SAE 5W-30 engine oil.
Use SAE 5W-30 engine oil. If SAE
Oil container labels provide important
5W-30 engine oil is not available, use
information.
SAE 0W-30 or SAE 10W-30 engine oil.
A chief contribution this type of oil
makes to fuel economy is reducing the
The quality designation SM or SN, or
amount of fuel necessary to overcome
ILSAC must be on the label.
engine friction.
▼ Inspecting Engine Oil Level
For maintenance service, Mazda
recommends Mazda Genuine Parts.
NOTE
If the engine oil level warning
indication/warning light turns on,
add 1 L (0.26 US gal, 0.22 Imp gal)
of engine oil.
1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal
operating temperature.
3. Turn it off and wait at least 5
minutes for the oil to return to the
oil pan.
6-18
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
4.
Pull out the dipstick, wipe it clean,
Engine Coolant
and reinsert it fully.
▼ Inspecting Coolant Level
WARNING
Do not use a match or live flame in
the engine compartment. DO NOT
ADD COOLANT WHEN THE ENGINE
IS HOT:
A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become very
hot. You could be burned. Carefully
inspect the engine coolant in the
1. MAX
2. OK
coolant reservoir, but do not open it.
3. MIN
5.
Pull it out again and examine the
level.
Pull over to a safe location, then
The level is normal if it is between
switch the ignition off and make sure
the MIN and MAX marks.
the fan is not running before
If it is near or below MIN, add
attempting to work near the cooling
enough oil to bring the level to
fan:
MAX.
Working near the cooling fan when it is
running is dangerous. The fan could
CAUTION
continue running indefinitely even if
the engine has stopped and the engine
Do not overfill the engine oil. This
compartment temperature is high. You
may cause engine damage.
could be hit by the fan and seriously
6.
Make sure the O-ring on the
injured.
dipstick is positioned properly
before reinserting the dipstick.
7.
Reinsert the dipstick fully.
Do not remove either
cooling system cap when the engine
and radiator are hot:
When the engine and radiator are hot,
scalding coolant and steam may shoot
out under pressure and cause serious
injury.
6-19
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
NOTE
SKYACTIV-G 2.5T
Changing the coolant should be done
by an Authorized Mazda Dealer.
Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year―at the beginning of
the winter season―and before
traveling where temperatures may drop
below freezing.
Inspect the condition and connections
of all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
If it is at or near LOW, add enough
coolant to the coolant reservoir to
The coolant should be at full in the
radiator and between the FULL and
provide freezing and corrosion
protection and to bring the level to
LOW marks on the coolant reservoir
when the engine is cool.
FULL.
Securely tighten the coolant reservoir
SKYACTIV-G 2.0 and SKYACTIV-G
2.5
tank cap after adding coolant.
CAUTION
¾ Radiator coolant will damage paint.
Rinse it off quickly if spilled.
¾ If the “FL22” mark is shown on or
near the cooling system cap, use of
FL-22 is recommended when
replacing engine coolant. Using
engine coolant other than FL-22 may
cause serious damage to the engine
and cooling system.
If the coolant reservoir is empty or new
coolant is required frequently, consult
an Authorized Mazda Dealer.
6-20
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
Brake/Clutch Fluid
Washer Fluid
▼ Inspecting Brake/Clutch Fluid
▼ Inspecting Washer Fluid Level
Level
WARNING
WARNING
Use only windshield washer fluid or
If the brake/clutch fluid level is low,
plain water in the reservoir:
have the brakes inspected:
Using radiator antifreeze as washer
A low brake/clutch fluid level is
fluid is dangerous. If sprayed on the
dangerous.
windshield, it will dirty the windshield,
A low level could indicate brake lining
affect your visibility, and could result in
wear or a brake system leak which
an accident.
could cause the brakes to fail and lead
to an accident.
Using Washer Fluid Without
Anti-freeze Protection in Cold
The brakes and clutch draw fluid from
Weather:
the same reservoir.
Operating your vehicle in temperatures
Inspect the fluid level in the reservoir
below 4 °C (40 °F) using washer fluid
regularly. It should be kept between
without anti-freeze protection is
the MAX and MIN lines.
dangerous as it could cause impaired
The level normally drops with
windshield vision and result in an
accumulated distance, a condition
accident. In cold weather, always use
associated with wear of brake and
washer fluid with anti-freeze
clutch linings. If it is excessively low,
protection.
have the brake/clutch system
inspected by an Authorized Mazda
Dealer.
6-21
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
NOTE
Body Lubrication
State or local regulations may restrict
the use of volatile organic compounds
▼ Body Lubrication
(VOCs), which are commonly used as
anti-freeze agents in washer fluid. A
All moving points of the body, such as
washer fluid with limited VOC content
door and hood hinges and locks,
should be used only if it provides
should be lubricated each time the
adequate freeze resistance for all
engine oil is changed. Use a
regions and climates in which the
nonfreezing lubricant on locks during
vehicle will be operated.
cold weather.
Inspect fluid level in the washer fluid
Make sure the hood's secondary latch
reservoir; add fluid if necessary.
keeps the hood from opening when
the primary latch is released.
1. F
2. E
The top of the float should be between
F and E.
Use plain water if washer fluid is
unavailable.
But use only washer fluid in cold
weather to prevent it from freezing.
NOTE
Front and rear washer fluid is supplied
from the same reservoir.
6-22
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
Contamination of either the
Wiper Blades
windshield or the blades with foreign
matter can reduce wiper effectiveness.
▼ Wiper Blades
Common sources are insects, tree sap,
and hot wax treatments used by some
CAUTION
commercial car washes.
¾ Hot waxes applied by automatic car
If the blades are not wiping properly,
washers have been known to affect
clean the window and blades with a
the wiper's ability to clean windows.
good cleaner or mild detergent; then
¾ To prevent damage to the wiper
rinse thoroughly with clean water.
blades, do not use gasoline,
Repeat if necessary.
kerosene, paint thinner, or other
solvents on or near them.
▼ Replacing Windshield Wiper
¾ When the wiper lever is in the AUTO
Blades
position and the ignition is switched
When the wipers no longer clean well,
ON, the wipers may move
the blades are probably worn or
automatically in the following cases:
cracked.
¾ If the windshield above the rain
Replace them.
sensor is touched.
¾ If the windshield above the rain
CAUTION
sensor is wiped with a cloth.
¾ To prevent damaging a windshield
¾ If the windshield is struck with a
wiper blade, wiper arm, or the hood,
hand or other object.
perform the following procedure.
¾ If the rain sensor is struck with a
hand or other object from inside
¾ Before lifting the windshield wiper
the vehicle.
blades off the windshield, always
move them to the service position.
Be careful not to pinch hands or
¾ When putting the windshield
fingers as it may cause injury, or
damage the wipers. When washing
wiper blades back on the
windshield, make sure that they
or servicing the vehicle, make sure
the wiper lever is in the OFF
are in the service position before
switching the ignition ON and
position.
¾ Before lifting the windshield wiper
operating the windshield wipers.
¾ Replace with Mazda genuine wiper
blades off the windshield, always
follow the procedure for moving the
blades. If they are replaced with
wiper blades other than a Mazda
windshield wiper blades. Otherwise,
a wiper blade, wiper arm, or the
genuine product, they may not wipe
with the same efficiency as the
hood could be damaged.
Refer to the Replacing Windshield
genuine product.
Wiper Blades (page 6-23) section
¾ To prevent damage to the wiper
for the procedure on how to move
arms and other components, do not
the windshield wiper blades to the
try to sweep the wiper arm by hand.
service position.
6-23
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
¾ Do not bend the blade rubber
3.
Slide the blade component in the
unnecessarily when replacing it.
direction of the arrow while
Otherwise, the metal stiffener in the
pressing the wiper arm tab to
blade may deform and the
remove the blade component from
windshield wiper operation may be
the wiper arm.
adversely affected.
¾ Do not hold a wiper blade by its end
when raising the wiper arm.
Otherwise, the part may deform and
the wiping performance may lower.
NOTE
You can replace the wiper blades
yourself, however you cannot replace
the wiper arms.
If you want to replace the wiper
arms, consult an Authorized Mazda
4.
Pull the blade rubber in the
Dealer.
direction of the arrow and slide it
Forcefully lowering the wiper arms
to a position where the blade
could damage the wiper arm and
holder groove can be checked.
blade, and may scratch or crack the
windshield.
Replace the wiper blades using the
following procedure.
1. Move the wipers to the service
positions using the following
procedure.
a) Switch the ignition ON.
b) Switch the ignition OFF.
c) Press up the wiper switch to the
MIST position 2 times within 30
seconds after switching the
ignition OFF.
When the procedure is
completed, the wipers operate
and they stop at the service
positions.
2. Raise the wiper arms.
CAUTION
To prevent damage to the
windshield let the wiper arm down
easily, do not let it slap down on
the windshield.
6-24
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
5. Pull the end of the blade rubber
6. Insert the end of the new blade
from the blade holder groove in the
rubber into the groove of the blade
direction of the arrow and remove
holder until it contacts the end of
the blade rubber from the blade
the blade holder.
holder.
6-25
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
7. After pulling the blade rubber in the
8. Make sure that the blade rubber is
direction of the arrow and sliding
correctly installed to the blade
the blade rubber to a position to
holder.
check the blade holder groove,
9. Slide the blade component and
slide the blade rubber end in the
install it to the wiper arm.
opposite direction.
10.Slowly lower the wiper arms onto
the windshield.
11.Move the wipers to their initial
positions using the following
procedure.
a) Make sure that the wipers are set
on the windshield.
b) Switch the ignition ON.
c) Press up the wiper switch to the
MIST position 1 time.
When the procedure is
completed, the wipers operate
and they stop at the initial
positions.
▼ Replacing Rear Window Wiper
Blade
When the wiper no longer cleans well,
the blade is probably worn or cracked.
Replace it.
CAUTION
To prevent damage to the wiper arm
and other components, do not move
the wiper by hand.
6-26
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
1. Remove the cover.
4. Pull down the blade rubber and
slide it out of the blade holder.
2. Remove the stopper and raise the
wiper arm.
5. Remove the metal stiffeners from
the blade rubber and install them in
the new blade.
3. Firmly rotate the wiper blade to the
right until it unlocks, then remove
CAUTION
the blade.
Do not bend or discard the
stiffeners. You need to use them
again.
6. Carefully insert the new blade
rubber.
Then install the blade assembly in
the reverse order of removal.
CAUTION
To prevent damage to the rear
window, do not let the wiper arm
fall on it.
6-27
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
Battery
Always keep batteries out of
▼ Battery
the reach of children:
Allowing children to play near batteries
WARNING
is dangerous. Battery fluid could cause
serious injuries if it gets in the eyes or
Wash hands after handling the battery
on the skin.
and related accessories:
Battery posts, terminals and related
accessories contain lead and lead
compounds, chemicals known to the
Keep flames and sparks away
State of California to cause cancer and
from open battery cells and do not
reproductive harm.
allow metal tools to contact the
positive (+) or negative (-) terminal of
the battery when working near a
battery. Do not allow the positive (+)
Read the following precautions
terminal to contact the vehicle body:
carefully before using the battery or
Flames and sparks near open battery
inspecting to ensure safe and correct
cells are dangerous. Hydrogen gas,
handling:
produced during normal battery
operation, could ignite and cause the
battery to explode. An exploding
battery can cause serious burns and
Always wear eye protection
injuries. Keep all flames including
when working near the battery:
cigarettes and sparks away from open
Working without eye protection is
battery cells.
dangerous. Battery fluid contains
SULFURIC ACID which could cause
blindness if splashed into your eyes.
Also, hydrogen gas produced during
Keep all flames and sparks
normal battery operation, could ignite
away from open battery cells because
and cause the battery to explode.
hydrogen gas is produced from open
battery cells while charging the
battery or adding battery fluid:
Flames and sparks near open battery
Wear eye protection and
cells are dangerous. Hydrogen gas,
protective gloves to prevent contact
produced during normal battery
with battery fluid:
operation, could ignite and cause the
Spilled battery fluid is dangerous.
battery to explode. An exploding
Battery fluid contains SULFURIC ACID
battery can cause serious burns and
which could cause serious injuries if it
injuries. Keep all flames including
gets in eyes, or on the skin or clothing.
cigarettes and sparks away from open
If this happens, immediately flush your
battery cells.
eyes with water for 15 minutes or wash
your skin thoroughly and get medical
attention.
6-28
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Maintenance and Care
Owner Maintenance
NOTE
Key Battery Replacement
Before performing battery
maintenance, remove the battery
▼ Key Battery Replacement
cover.
If the buttons on the transmitter are
inoperable and the operation indicator
light does not flash, the battery may be
dead.
Replace with a new battery before the
transmitter becomes unusable.
CAUTION
¾ Make sure the battery is installed
correctly. Battery leakage could occur
if it is not installed correctly.
¾ When replacing the battery, be
▼ Battery Maintenance
careful not to touch any of the
internal circuitry and electrical
terminals, bend the electrical
terminals, or get dirt in the
transmitter as the transmitter could
be damaged.
¾ There is the danger of explosion if
the battery is not correctly replaced.
¾ Dispose of used batteries according
to the following instructions.
¾ Insulate the plus and minus
terminals of the battery using
To get the best service from a battery:
cellophane or equivalent tape.
Keep it securely mounted.
¾ Never disassemble.
Keep the top clean and dry.
¾ Never throw the battery into fire or
Keep terminals and connections
water.
clean, tight, and coated with
¾ Never deform or crush.
petroleum jelly or terminal grease.
¾ Replace only with the same type
Rinse off spilled electrolyte
battery (CR2032 or equivalent).
immediately with a solution of water
The following conditions indicate that
and baking soda.
the battery power is low:
If the vehicle will not be used for an
extended time, disconnect the
A message, “Low Key Fob Battery.
battery cables and charge the battery
Replace Battery” is displayed on the
every 6 weeks.
multi-information display when the
ignition is switched OFF.
▼ Battery Replacement
Contact an Authorized Mazda Dealer
for battery replacement.
6-29
CX-30_8JP5-EA-20K_Edition1_new
2020-7-22 15:50:09
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст