Mazda Protege 5. Manual — part 298
AIR BAG SYSTEM
08–10–18
5. Tie all tires together with wire.
6. Connect the SST (Deployment tool) to the SST
(Adapter harness).
7. Connect the red clip of the SST (Deployment tool)
to the positive battery terminal and the black clip
to the negative battery terminal.
8. Verify that the red light on the SST (Deployment
tool) is illuminated.
9. Make sure all persons are standing at least 6 m
{20 ft} away from the tires.
10. Press the activation switch on the SST
(Deployment tool) to deploy the driver-side air
bag module.
Passenger-side air bag module
1. Remove the passenger-side air bag module. (See 08–10–6 PASSENGER-SIDE AIR BAG MODULE
REMOVAL/INSTALLATION.)
2. Install the bolts to the passenger-side air bag
module.
Warning
••••
If the air bag module is not properly
installed to the tire, serious injury may
occur when the module is deployed.
When installing the air bag module to the
tire, make sure the module is facing the
center of the tire.
X3U810WAX
X3U810WAY
X3U810WAZ
X3U810WB0
1712-1U-01G(08-10).fm 18 ページ 2001年6月29日 金曜日 午前10時24分
AIR BAG SYSTEM
08–10–19
08–10
3. Tie the passenger-side air bag module to a tire
with the module facing the center of the tire. Wrap
the wire harness through the tire and around the
bolts at least four times.
4. Connect the SST (Adapter harness) to the
passenger-side air bag module as shown in the
figure.
5. Stack the tire with the passenger-side air bag
module on top of 2 tires. Stack a tire on top of the
3 tires. Stack another tire that has a wheel on top
of the 4 tires.
6. Tie all tires together with wire.
X3U810WB1
X3U810WB2
X3U810WB3
X3U810WB4
1712-1U-01G(08-10).fm 19 ページ 2001年6月29日 金曜日 午前10時24分
AIR BAG SYSTEM
08–10–20
7. Connect the SST (Deployment tool) to the SST
(Adapter harness).
8. Connect the red clip of the SST (Deployment tool)
to the positive battery terminal and the black clip
to the negative battery terminal.
9. Verify that the red light on the SST (Deployment
tool) is illuminated.
10. Make sure all persons are standing at least 6 m
{20 ft} away from the tires.
11. Press the activation switch on the SST
(Deployment tool) to deploy the passenger-side
air bag module.
Side air bag module
1. Remove the side air bag module. (See 08–10–7 SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)
2. Install the nuts to the side air bag module.
Warning
••••
If the air bag module is not properly
installed to the tire, serious injury may
occur when the module is deployed.
When installing the air bag module to the
tire, make sure the module is facing the
center of the tire.
3. Tie the side air bag module to the tire with the
module facing the center of the tire. Wrap the wire
harness through the tire and around the nuts at
least 4 times.
X3U810WB5
X3U810WB6
Y3U810WAF
Y3U810WAG
1712-1U-01G(08-10).fm 20 ページ 2001年6月29日 金曜日 午前10時24分
AIR BAG SYSTEM
08–10–21
08–10
4. Connect the SST (Adapter harness) to the side
air bag module as shown in the figure.
5. Stack the tire with the side air bag module on top
of 2 tires. Stack a tire on top of 3 tires. Stack
another tire that has a wheel on top of the 4 tires.
6. Tie all tires together with wire.
7. Connect the SST (Deployment tool) to the SST
(Adapter harness).
8. Connect the red clip of the SST (Deployment tool)
to the positive battery terminal and the black clip
to the negative battery terminal.
9. Verify that the red light on the SST (Deployment
tool) is illuminated.
10. Make sure all persons are standing at least 6 m
{20ft} from the tires.
Y3U810WAH
Y3U810WAJ
Y3U810WAK
Y3U810WAL
1712-1U-01G(08-10).fm 21 ページ 2001年6月29日 金曜日 午前10時24分
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст