Mazda 5. Manual — part 66
BODY STRUCTURE [PANEL REPLACEMENT]
09–80B–27
09
End Of Sie
TORQUE BOX INSTALLATION
DPE098053381B02
1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Drill holes for plug welds before installing new parts.
3. After temporarily installing new parts, make sure the related parts fit properly.
9
2
5
1
11
(A)2
TORQUE BOX
DPE0980B072
09–80B–28
BODY STRUCTURE [PANEL REPLACEMENT]
End Of Sie
FRONT FRAME (REAR) REMOVAL
DPE098053390B01
1. Remove the front frame (rear).
9
2
5
1
11
2
TORQUE BOX
DPE0980B073
BODY STRUCTURE [PANEL REPLACEMENT]
09–80B–29
09
End Of Sie
FRONT FRAME (REAR) INSTALLATION
DPE098053390B02
1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Drill holes for plug welds before installing new parts.
3. After temporarily installing new parts, make sure the related parts fit properly.
20
10
2
2
2
6
1
FRONT FRAME (REAR)
DPE0980B070
09–80B–30
BODY STRUCTURE [PANEL REPLACEMENT]
End Of Sie
FRONT PILLAR REMOVAL
DPE098074090B01
1. Rough cut area (A), drill the 71 locations indicated by (B).
Caution
• Avoid cutting with a blow torch or similar tools as the insulator (shaded area) is flammable.
2. When the front pillar (outer) is being removed, the cowl panel may interfere with the front pillar (outer) and make
removal difficult. Therefore, drill the 2 locations indicated by (C) and then open the cowl panel outward.
20
10
2
2
6
1
2
FRONT FRAME (REAR)
DPE0980B071
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст