Mazda 5. Manual — part 40
05–17–80
AUTOMATIC TRANSAXLE
3. Install the bearing (secondary gear side) to the
output gear using the SST and suitable plate.
End Of Sie
PRIMARY GEAR DISASSEMBLY/ASSEMBLY
B3E051719204A02
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
Bearing Disassembly Note
• Remove the bearing from the primary gear using
the SSTs and suitable plate.
Bearing Assembly Note
• Install the bearing to the primary gear using the
SSTs.
End Of Sie
49 V001 525
PRESS
SUITABLE PLATE
B3E0517A144
SST
R
1
2
B3E0517A145
1
Bearing
(See 05–17–80 Bearing Disassembly Note.)
(See 05–17–80 Bearing Assembly Note.)
2
Primary gear
49 F026 102
49 T019 007
PRESS
SUITABLE PLATE
49 F401 366A
B3E0517A146
49 0727 415
49 UB71 525
PRESS
B3E0517A147
AUTOMATIC TRANSAXLE
05–17–81
05
CONTROL VALVE BODY DISASSEMBLY/ASSEMBLY
B3E051721100A10
Control Valve Body Disassembly
Caution
• Denting or scratching these components will reduce the ability of the transaxle to shift properly.
When handling these components or the valve body that contains them, be careful not to drop or
hit them.
1. Disassemble in the order indicated in the table.
2. Neatly arrange the removed parts to avoid confusing the similar parts.
Warning
• Using compressed air can cause dirt and other particles to fly out, causing injury to the eyes.
Wear protective eye wear whenever using compressed air.
3. Clean the removed parts with cleaning solvent, then use compressed air to dry them. Use compressed air to
clean out all holes and passages.
1
Transaxle fluid temperature sensor
ATF
ATF
ATF
ATF
ATF
ATF
ATF
ATF
ATF
ATF
R
R
R
R
R
R
R
8
7
5
4
3
1
2
6
9
10
19
18
17
15
16
14
13
11
12
20
22
21
B3E0517A148
05–17–82
AUTOMATIC TRANSAXLE
Disassembly procedure
1. Remove the oil strainer.
2. Remove the O-ring from the oil strainer.
3. Remove the packing.
4. Remove the bracket.
5. Remove the shift solenoid A, B, C.
2
Oil strainer
3
O-ring
4
Packing
5
Bracket
6
Shift solenoid A
7
Shift solenoid B
8
Shift solenoid C
9
Pressure control solenoid
10
Shift solenoid D
11
Shift solenoid E
12
Upper control valve body
13
Seal plate
14
Main control valve body
15
Tubular pin
16
Pressure modifier accumulator spring
17
Pressure modifier accumulator
18
Gasket D
19
Separator plate
20
Gasket C
21
Solenoid control valve body
22
Tubular pin
BRACKET
B3E0517A149
SHIFT SOLENOID B
SHIFT SOLENOID C
SHIFT SOLENOID A
B3E0517A150
AUTOMATIC TRANSAXLE
05–17–83
05
6. Remove the pressure control solenoid, shift
solenoid D, E.
7. Loosen the bolts evenly in the pattern shown.
8. Remove the upper control valve body.
9. Remove the seal plate.
10. Remove the main control valve body.
SHIFT SOLENOID VALVE D
PRESSURE CONTROL
SOLENOID
SHIFT SOLENOID VALVE E
B3E0517A151
BOLT
BOLT
BOLT
BOLT
BOLT
B3E0517A152
SEAL PLATE
UPPER CONTROL
VALVE BODY
MAIN CONTROL
VALVE BODY
B3E0517A153
SEAL PLATE
MAIN CONTROL
VALVE BODY
B3E0517A154
MAIN CONTROL
VALVE BODY
SOLENOID VALVE BODY
B3E0517A155
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст