Acura RL (1996-2004 year). Manual — part 624
Stereo Amplifier Terminals (With Bose Sound System)
Cavity Wire Connects to
Cavity Wire Connects to
Main Menu
Table of Contents
Stereo Sound System
Audio Unit Terminals
'96 - 98 models - Standard Sound System:
'99 - 01 models - Bose Sound System (without navigation system):
'96 - 98 models - Bose Sound System:
'99 - 01 models - Bose Sound System (with navigation system):
Main Menu
Table of Contents
Terminal C1, C2, C3, C5, C8 and C9 are not used.
*1: '96 -99 models
*2: '00-01 models
*3: With navigation system
Bose Sound System:
Standard Sound System:
Cavity Wire Connects to
Cavity Wire Connects to
Terminals B1, B2, B3, B4, B6 and B7 are not used.
With Navigation System:
Main Menu
Table of Contents
Stereo Sound System
Audio Unit Removal
SRS components are located in this area. Review the
SRS component locations, precautions, and procedures
in the SRS (
) before performing repairs or
service.
With navigation system:
1. Make sure you have the anti-theft code for the radio
and the navigation system, then write down the fre-
quencies for the radio's preset buttons.
2. Remove the navigation panel and audio panel
).
3. Remove the four mounting screws, then remove the
navigation monitor.
4. Loosen the audio unit mounting screws.
5. Remove the pins from the bracket, then remove the
navigation panel.
7. Install in the reverse order of removal.
8. After installing the audio unit, enter the anti-theft
code for the radio and the navigation system, then
enter the customer's radio station presets.
6. Remove the four screws, then remove the audio unit.
AUDIO UNIT
SCREWS
Main Menu
Table of Contents
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст