Acura RL (2011 year). Manual — part 8
▲ ▼
▲ ▼
When KEYLESS ACCESS LIGHT
FLASH is set to ON, some exterior
lights blink twice when you unlock
the doors by grabbing the driver’s
door handle while carrying the
remote.
While the multi-information display
is in the KEYLESS ACCESS SETUP
screen of the CUSTOMIZE GROUP,
press the SEL/RESET button. The
screen changes to CUSTOMIZE
MENU. Press the INFO (
/
)
button until you see the above
display.
The same exterior lights blink once
when you lock the doors by touching
the door lock sensor while carrying
the remote.
Press the SEL/RESET button. The
screen changes as shown above.
Select ON or OFF by pressing the
INFO (
/
) button, then press the
SEL/RESET button to enter your
selection.
CONTINUED
Keyless Access Light Flash
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
111
10/08/04 19:00:29 31SJA660_116
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
To exit KEYLESS ACCESS LIGHT
FLASH without changing the
current setting, select EXIT by
pressing the INFO (
/
) button,
then press the SEL/RESET button.
The screen goes back to
CUSTOMIZE MENU.
When your choice is set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE ENTRY.
If your choice is not set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE SETUP. If this
happens, you need to repeat the
keyless access light flash setup.
Multi-Information Display
112
10/08/04 19:00:36 31SJA660_117
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
▲ ▼
When KEYLESS ACCESS BEEP is
set to ON, the beeper sounds twice
when you unlock the doors by
grabbing the drivers door handle
while carrying the remote.
When you lock the doors by
touching the door lock sensor while
carrying the remote, the beeper
sounds once.
While the multi-information display
is in the KEYLESS ACCESS SETUP
screen of the CUSTOMIZE GROUP,
press the SEL/RESET button. The
screen changes to CUSTOMIZE
MENU. Press the INFO (
/
)
button until you see the above
display.
Press the SEL/RESET button. The
screen changes as shown above.
Select ON or OFF by pressing the
INFO (
/
) button, then press the
SEL/RESET button to enter your
selection.
CONTINUED
Keyless Access Beep
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
113
10/08/04 19:00:45 31SJA660_118
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
To exit KEYLESS ACCESS BEEP
without changing the current setting,
select EXIT by pressing the INFO
(
/
) button, then press the SEL/
RESET button. The screen goes
back to CUSTOMIZE MENU.
When your choice is set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE ENTRY.
If your choice is not set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE SETUP. If this
happens, you need to repeat the
keyless access beep setup.
Multi-Information Display
114
10/08/04 19:00:52 31SJA660_119
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
▲
▼
▲ ▼
▲
▼
There are three settings in the
lighting setup:
INTERIOR LIGHT
DIMMING TIME
While CUSTOMIZE GROUP is
shown on the multi-information
display, select LIGHTING SETUP by
pressing the INFO (
/
) button,
then press the SEL/RESET button.
AUTO LIGHT SENSITIVITY
HEADLIGHT AUTO OFF TIMER
Each time you press the INFO (
/
) button, the screen changes as
shown in the illustration. Press the
INFO (
/
) button, until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
CONTINUED
Lighting Setup
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
115
see page 116
see page 118
see page 120
Press the
or
button.
Press the SEL/RESET button.
10/08/04 19:01:03 31SJA660_120
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
While LIGHTING SETUP is shown
in the CUSTOMIZE GROUP of the
multi-information display, press the
SEL/RESET button. You will see the
above display.
Press the SEL/RESET button. The
screen changes as shown above.
Select how long you want the lights
to stay on before they fade out (60,
30, or 15 seconds) by pressing the
INFO (
/
) button, then press the
SEL/RESET button to enter your
selection.
The interior lights fade out when you
close all doors. To change how long
the lights stay on before they fade
out, follow these instructions:
Interior Light Dimming Time
Multi-Information Display
116
10/08/04 19:01:10 31SJA660_121
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
When your choice is set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE ENTRY.
To exit INTERIOR LIGHT
DIMMING TIME without changing
the current setting, select EXIT by
pressing the INFO (
/
) button,
then press the SEL/RESET button.
The screen goes back to
CUSTOMIZE MENU.
If your choice is not set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE SETUP. If this
happens, you need to repeat the
interior light dimming time setup.
CONTINUED
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
117
10/08/04 19:01:18 31SJA660_122
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
▲ ▼
The headlights, parking lights, side
marker lights, taillights, and license
plate lights go off after the selected
time when you close the driver’s
door and take the remote with you.
To change how long the lights stay
on before they go off, follow these
instructions:
While the multi-information display
is in the LIGHTING SETUP screen
of the CUSTOMIZE GROUP, press
the SEL/RESET button. The screen
changes to CUSTOMIZE MENU.
Press the INFO (
/
) button until
you see the above display.
Press the SEL/RESET button. The
screen changes as shown above.
Select how long you want the lights
to stay on before they go off (0, 15,
30, or 60 seconds) by pressing the
INFO (
/
) button, then press the
SEL/RESET button to enter your
selection.
Headlight Auto Of f Timer
Multi-Information Display
118
10/08/04 19:01:26 31SJA660_123
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
To exit HEADLIGHT AUTO OFF
TIMER without changing the
current setting, select EXIT by
pressing the INFO (
/
) button,
then press the SEL/RESET button.
The screen goes back to
CUSTOMIZE MENU.
When your choice is set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE ENTRY.
If your choice is not set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE SETUP. If this
happens, you need to repeat the
headlight auto off timer setup.
CONTINUED
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
119
10/08/04 19:01:34 31SJA660_124
-------------------------------------------------------------------------------------------------------------------------------------------------------------
−
−
−
−
−
▲ ▼
▲ ▼
MAX
The headlights come on when it is
bright.
HIGH
The headlights come on when it is
somewhat bright.
MID
The headlights come on when it is as
bright as sunset or sunrise.
LOW
The headlights come on when it is
somewhat dark.
MIN
The headlights come on when it is
dark.
While LIGHTING SETUP is shown
in the CUSTOMIZE GROUP of the
multi-information display, press the
SEL/RESET button. The screen
changes to CUSTOMIZE MENU.
Press the INFO (
/
) button until
you see the above display.
Press the SEL/RESET button. The
screen changes as shown above.
Select from five levels of sensitivity
by pressing the INFO (
/
) button,
then press the SEL/RESET button
to enter your selection.
The headlights automatically come
on when the headlight switch is in
the AUTO position and the ambient
light reaches a changeable level. You
can select the auto light sensitivity
from the following five levels:
Auto Light Sensitivity
Multi-Information Display
120
10/08/04 19:01:45 31SJA660_125
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
To exit AUTO LIGHT SENSITIVITY
without changing the current setting,
select EXIT by pressing the INFO
(
/
) button, then press the SEL/
RESET button. The screen goes
back to CUSTOMIZE MENU.
When your choice is set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE ENTRY.
If your choice is not set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE SETUP. If this
happens, you need to repeat the
headlight auto light sensitivity setup.
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
121
10/08/04 19:01:52 31SJA660_126
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲
▼
▲
▼
▲ ▼
▲
▼
AUTO DOOR LOCK
AUTO DOOR UNLOCK
There are five settings to choose
from in the door/window setup:
While CUSTOMIZE GROUP is
shown on the multi-information
display, select DOOR/WINDOW
SETUP by pressing the INFO (
/
) button, and then press the SEL/
RESET button.
Each time you press the INFO (
/
) button, the screen changes as
shown in the illustration. Press the
INFO (
/
) button, until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
SECURITY RELOCK TIMER
DOOR LOCK MODE
KEYLESS LOCK
ACKNOWLEDGMENT
Door/Window Setup
Multi-Information Display
122
see page 123
see page 125
see page 127
see page 129
see page 131
Press the
or
button.
Press the SEL/RESET button.
10/08/04 19:02:05 31SJA660_127
-------------------------------------------------------------------------------------------------------------------------------------------------------------
−
−
−
▲ ▼
There are three settings you can
choose from:
SHIFT FROM P
The doors lock whenever you move
the shift lever out of Park.
WITH VEH SPD
The doors lock when the vehicle
speed reaches about 10 mph (about
15 km/h).
OFF
The auto door lock mode is
deactivated all the time.
While DOOR/WINDOW SETUP is
shown in the CUSTOMIZE GROUP
of the multi-information display,
press the SEL/RESET button. You
will see the above display.
Press the SEL/RESET button. The
screen changes as shown above.
Select the desired setting by
pressing the INFO (
/
) button,
then press the SEL/RESET button
to enter your selection.
CONTINUED
Auto Door Lock
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
123
10/08/04 19:02:15 31SJA660_128
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
To exit AUTO DOOR LOCK without
changing the current setting, select
EXIT by pressing the INFO (
/
)
button, then press the SEL/RESET
button. The screen goes back to
CUSTOMIZE MENU.
When your choice is set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE ENTRY.
If your choice is not set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE SETUP. If this
happens, you need to repeat the auto
door lock setup.
Multi-Information Display
124
10/08/04 19:02:23 31SJA660_129
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
−
▲ ▼
−
−
There are three settings you can
choose from:
While DOOR/WINDOW SETUP is
shown in the CUSTOMIZE GROUP
of the multi-information display,
press the SEL/RESET button. The
screen changes to CUSTOMIZE
MENU. Press the INFO (
/
)
button until you see the above
display.
SHIFT TO P
The driver’s door or
all the doors, depending on the door
lock mode setting (see page
),
unlock when you move the shift
lever to Park with the brake pedal
depressed.
Press the SEL/RESET button. The
screen changes as shown above.
Select the desired setting by
pressing the INFO (
/
) button,
then press the SEL/RESET button
to enter your selection.
IGN OFF
The driver’s door or all
the doors, depending on the door
lock mode setting (see page
),
unlock when you turn the ignition
switch to the LOCK (0) position.
OFF
The auto door unlock mode
is deactivated all the time.
127
127
CONTINUED
Auto Door Unlock
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
125
10/08/04 19:02:34 31SJA660_130
-------------------------------------------------------------------------------------------------------------------------------------------------------------
▲ ▼
To exit AUTO DOOR UNLOCK
without changing the current setting,
select EXIT by pressing the INFO
(
/
) button, then press the SEL/
RESET button. The screen goes
back to CUSTOMIZE MENU.
When your choice is set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE ENTRY.
If your choice is not set, you will see
the above display for several seconds,
then the screen goes back to
CUSTOMIZE SETUP. If this
happens, you need to repeat the auto
door unlock setup.
Multi-Information Display
126
10/08/04 19:02:42 31SJA660_131
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст