Acura TSX / Honda Accord CL. Manual — part 113
Without Navigation System
1. Remove the Audio-HVAC-Display module (see AUDIO-HVAC DISPLAY MODULE
REMOVAL/INSTALLATION ).
2. Remove the screws securing the center vent (A), then remove it.
NOTE:
z
Put on gloves to protect your hands.
z
Take care not to scratch the dashboard and related parts.
z
Lay a shop towel under the parts when working on them to protect the
face panel from scratches or other damage.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX
Fig. 117: Removing Center Vent
3. Install the center vent in the reverse order of removal.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX
With Navigation System
1. Remove the Audio-HVAC-Display module (see AUDIO-HVAC DISPLAY MODULE
REMOVAL/INSTALLATION ).
2. Remove the audio unit (see AUDIO-HVAC DISPLAY MODULE REMOVAL/INSTALLATION ).
3. Remove the screws (A, B) securing the center vent (C) and the display unit cover (D).
NOTE:
z
Put on gloves to protect your hands.
z
Take care not to scratch the dashboard and related parts.
z
Lay a shop towel under the parts when working on them to protect the
face panel from scratches or other damage.
z
Do not work in a dusty or dirty place.
z
Discharge static electricity from your body before and during the work.
z
Do not touch the circuit board with your bare hands.
z
Do not work with dirty hands.
z
Be careful not to fold the flat plate cable.
z
Do not touch the terminal connector of the flat plate cable with your bare
hands. (If you have touched it, wipe it off thoroughly.)
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX
Fig. 118: Removing The Screws
4. Pull up on the top of the display unit cover (A) slightly until the middle mounting portion (B) of the
center vent (C) can be removed from under the bracket (D), then remove the center vent from the center
panel (E).
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст