Acura TSX / Honda Accord CL. Manual — part 780
Fig. 26: Removing The Bolt Securing The Reverse Idler Gear Shaft Holder
2. Install a 5 x 0.8 mm bolt (B) in the reverse idler gear shaft, and pull it to remove the reverse idler gear
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
shaft (C) and gear shaft holder (D) together.
3. Remove the reverse idler gear.
Fig. 27: Removing The Reverse Idler Gear
Installation
1. Install the reverse idler gear in the transmission housing.
2. Lightly coat the reverse idler gear shaft (A), needle bearing (B), and new O-rings (C) with lithium grease.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Fig. 28: Lightly Coating The Reverse Idler Gear Shaft, Needle Bearing, And New O-Rings With
Lithium Grease
3. Assemble the new O-rings and needle bearing on the reverse idler gear shaft, then install the reverse idler
gear shaft in the reverse idler gear shaft holder (D). Align the D-shaped cut out (E) of the shaft with the
D-shaped area (F) of the holder.
4. Install the reverse idler gear shaft/holder assembly on the transmission housing.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Fig. 29: Installing The Reverse Idler Gear Shaft/Holder Assembly On The Transmission Housing
VALVE BODY
VALVE BODY AND ATF STRAINER REMOVAL
1. Remove the ATF feed pipes (A) and ATF joint pipes (B).
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст