Acura TSX / Honda Accord CL. Manual — part 123

Fig. 5: Keyless Entry/Security Alarm System Wiring Diagram (3 Of 3)

DOOR LOCK ACTUATOR TEST

DRIVER'S DOOR

1. Remove the driver's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Keyless Entry/Security Alarm System - TSX

2. Disconnect the 2P connector from the actuator.

Fig. 6: Disconnecting The 2P Connector From The Actuator

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Keyless Entry/Security Alarm System - TSX

3. Check actuator operation by connecting power and ground according to the table. See Fig. 7 . To prevent

damage to the actuator, apply battery voltage only momentarily.

Fig. 7: Driver's Door Lock Actuator Test Table

4. If the actuator does not operate as specified, replace it.

PASSENGER'S DOOR

1. Remove the passenger's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).

2. Disconnect the 2P connector from the actuator.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Keyless Entry/Security Alarm System - TSX

Fig. 8: Disconnecting The 2P Connector From The Actuator

3. Check actuator operation by connecting power and ground according to the table. See Fig. 9 . To prevent

damage to the actuator, apply battery voltage only momentarily.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Keyless Entry/Security Alarm System - TSX