Acura TSX / Honda Accord CL. Manual — part 124
Fig. 9: Passenger's Door Lock Actuator Test Table
4. If the actuator does not operate as specified, replace it.
DOOR LOCK KNOB SWITCH TEST
DRIVER'S DOOR
1. Remove the driver's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
2. Disconnect the 3P connector from the actuator.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Keyless Entry/Security Alarm System - TSX
Fig. 10: Disconnecting The 3P Connector From The Actuator
3. Check for continuity between the terminals.
z
There should be continuity between the No. 2 and No. 3 terminals when the door lock knob switch
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Keyless Entry/Security Alarm System - TSX
is in the LOCK position and no continuity when the switch is in the UNLOCK position.
z
There should be continuity between the No. 1 and No. 3 terminals when the door lock knob switch
is in the UNLOCK position and no continuity when the switch is in the LOCK position.
4. If the continuity is not as specified, replace the door lock actuator.
FRONT PASSENGER'S DOOR
1. Remove the front passenger's door panel (see FRONT DOOR PANEL
REMOVAL/INSTALLATION ).
2. Disconnect the 3P connector from the actuator.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Keyless Entry/Security Alarm System - TSX
Fig. 11: Disconnecting The 3P Connector From The Actuator
3. Check for continuity between the terminals.
z
There should be continuity between the No. 1 and No. 3 terminals when the door lock knob switch
in the UNLOCK position and no continuity when the switch is in the LOCK position.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Keyless Entry/Security Alarm System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст