Acura TSX / Honda Accord CL. Manual — part 449
2. The main journal codes are stamped on the crankshaft.
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Fig. 187: Locating Main Journal Codes
3. Use the crank bore codes and crank journal codes to select the appropriate replacement bearings from the
following table. See Fig. 188 .
Fig. 188: Replacement Bearings Color Code Table
NOTE:
z
The color code is on the edge of the bearing.
z
When using bearing halves of different colors, it does not matter
which color is used in the top or bottom.
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
CONNECTING ROD BEARING REPLACEMENT
Rod Bearing Clearance Inspection
1. Remove the oil pump (see OIL PUMP REMOVAL ).
2. Remove the baffle plates (see step 6 of CRANKSHAFT & PISTON REMOVAL ).
3. Remove the connecting rod cap and bearing half.
4. Clean the crankshaft rod journal and bearing half with a clean shop towel.
5. Place plastigage across the rod journal.
6. Reinstall the bearing half and cap, and torque the bolts to 36 N.m (3.7 kgf.m, 27 lbf.ft) + 120°
7. Remove the rod cap and bearing half, and measure the widest part of the plastigage.
Connecting Rod Bearing-To-Journal Oil Clearance:
Standard (New): 0.032-0.066 mm (0.0013-0.0026 in.)
Service Limit: 0.077 mm (0.0030 in.)
Fig. 189: Measuring The Widest Part Of The Plastigage
NOTE:
Do not rotate the crankshaft during inspection.
2004 Acura TSX
2004 ENGINES 2.4L DOHC VTEC - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст