Acura TSX / Honda Accord CL. Manual — part 623
Fig. 116: Measuring Voltage Between PGM-FI Main Relay 1 (FI MAIN) 4P Connector
Terminal No. 3 & Body Ground
52. Check for continuity between PGM-FI main relay 1 (FI MAIN) 4P connector terminal No. 4 and
ECM/PCM connector terminal E7.
Is there continuity?
YES: Test PGM-FI main relay 1 (FI MAIN) (see RELAYS ). If the relay is OK, update the
ECM/PCM if it does not have the latest software, or substitute a known-good ECM/PCM,
then recheck (see HOW TO SUBSTITUTE THE ECM/PCM ). If the symptom/indication
goes away with a known-good ECM/PCM, replace the original ECM/PCM.
NO: Repair open in the wire between PGM-FI main relay 1 (FI MAIN) and the ECM/PCM
(E7).
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 117: Checking For Continuity Between PGM-FI Main Relay 1 (FI MAIN) 4P Connector
Terminal No. 4 & ECM/PCM Connector Terminal E7
53. Reconnect ECM/PCM connector E (31P).
54. Turn the ignition switch ON (II).
55. Measure voltage between body ground and ECM/PCM connector terminals A2 and A3 individually.
Is there battery voltage?
YES: Go to step 62 .
NO: Go to step 56.
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 118: Measuring Voltage Between Body Ground & ECM/PCM Connector Terminals A2
& A3
56. Turn the ignition switch OFF.
57. Remove PGM-FI main relay 1 (FI MAIN) (A).
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 119: Removing PGM-FI Main Relay 1 (FI MAIN)
58. Turn the ignition switch ON (II).
59. Measure voltage between PGM-FI main relay 1 4P connector terminal No. 2 and body ground.
Is there battery voltage?
YES: Go to step 60.
NO: Repair open in the wire between the No. 8 FI ECU (ECM/PCM) (15A) fuse and PGM-
FI main relay 1 (FI MAIN).
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст