Acura TSX / Honda Accord CL. Manual — part 624
Fig. 120: Measuring Voltage Between PGM-FI Main Relay 1 4P Connector Terminal No. 2 &
Body Ground
60. Turn the ignition switch OFF.
61. Check for continuity between PGM-FI main relay 1 (FI MAIN) 4P connector terminal No. 1 and
ECM/PCM connector terminals A2 and A3 individually.
Is there continuity?
YES: Replace PGM-FI main relay 1 (FI MAIN).
NO: Repair open in the wire between PGM-FI main relay 1 (FI MAIN) and the ECM/PCM
(A2, A3).
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 121: Checking For Continuity Between PGM-FI Main Relay 1 (FI MAIN) 4P Connector
Terminal No. 1 & ECM/PCM Connector Terminals A2 & A3
62. Measure voltage between body ground and ECM/PCM connector terminals A4, A5, A8 and A9
individually.
Is there more than 0.2 V?
YES: Repair open in the wire(s) that had more than 0.2 V between G101 and the ECM/PCM
(A4, A5, A8, A9).
NO: Go to step 63.
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 122: Measuring Voltage Between Body Ground & ECM/PCM Connector Terminals A4,
A5, A8 & A9
63. Measure voltage between body ground and ECM/PCM connector terminal A21.
Is there more than 5 V?
YES: Go to step 71 .
NO: Go to step 64.
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 123: Measuring Voltage Between Body Ground & ECM/PCM Connector Terminal A21
64. Turn the ignition switch OFF.
65. Disconnect the connector from each of these sensors, one at a time, and measure voltage between body
ground and ECM/PCM connector terminal A21 with the ignition switch ON (II):
z
Manifold absolute pressure (MAP) sensor
z
Accelerator pedal position (APP) sensor
z
Mainshaft speed sensor (A/T)
Is there about 5 V?
YES: Replace the sensor that restored 5 V when disconnected.
NO: Go to step 66.
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст