Acura TSX / Honda Accord CL. Manual — part 368
Fig. 4: Disconnecting Clutch Interlock Switch 2-Pin Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2004 Acura TSX
2004 STARTING & CHARGING SYSTEMS Starter - TSX
Fig. 5: Checking Continuity Between Terminals
Courtesy of AMERICAN HONDA MOTOR CO., INC.
SYSTEM TESTS
STARTER PERFORMANCE TEST
1. Connect the battery to the starter by using as heavy a wire as possible (preferably equivalent to the wire
used for the vehicle). To avoid damaging the starter, never leave the battery connected for more than 10
seconds. If the starter pinion moves out, it is working properly. See Fig. 6 .
2. Disconnect the battery from the body. See Fig. 7 . If the pinion retracts immediately, it is working
properly.
3. Clamp the starter firmly in a vise.
4. Connect the starter to the battery, and confirm that the motor starts and keeps rotating. See Fig. 8 .
5. If the electric current and motor speed meet the specifications when the battery voltage is at 11.5 V, the
starter is working properly. See STARTER PERFORMANCE TEST SPECIFICATIONS .
STARTER PERFORMANCE TEST SPECIFICATIONS
Application
(1)
Maximum Amps @ Minimum RPM
Starter
80 @ 2300
(1)
Battery voltage must stay at 11.5 volts or more during test.
2004 Acura TSX
2004 STARTING & CHARGING SYSTEMS Starter - TSX
Fig. 6: Connecting Battery To Starter
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2004 Acura TSX
2004 STARTING & CHARGING SYSTEMS Starter - TSX
Fig. 7: Disconnecting Battery From Starter Body
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2004 Acura TSX
2004 STARTING & CHARGING SYSTEMS Starter - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст