Acura TSX / Honda Accord CL. Manual — part 843

Fig. 73: Connecting The Countershaft Speed Sensor Connector & Mainshaft Speed Sensor
Connector

53. Connect the AF sensor connector (C), then install it on its bracket (D).

54. Connect the transmission range switch connector (E), then install it on its bracket (F).

55. Install the harness clamps (G) on the harness clamp brackets (H).

56. Install the A/T clutch pressure control solenoid valve A connector and 2nd clutch transmission fluid

pressure switch connector (B), and install the harness clamps (C) on the harness clamp brackets (D).

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

Fig. 74: Installing The A/T Clutch Pressure Control Solenoid Valve A Connector & 2nd Clutch
Transmission Fluid Pressure Switch Connector

57. Refill the transmission with ATF (see step 4 of DRAINING & REFILLING ).

58. Install the battery base.

59. Install the air cleaner housing and intake air duct.

60. Install the battery tray, battery, and battery cover, then secure the battery with its hold-down bracket.

61. Connect the battery terminals.

62. Set the parking brake. Start the engine, and shift the transmission through all gears three times.

63. Check the shift lever operation, A/T gear position indicator operation, and shift cable adjustment.

64. Check and adjust the front wheel alignment (see WHEEL ALIGNMENT PROCEDURES ).

65. Install the splash shield.

66. Start the engine in the P or N position, and warm it up to normal operating temperature (the radiator fan

comes on).

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

67. Turn off the engine, and check the ATF level (see CHECKING FLUID LEVELS ).

68. Perform the road test (see ROAD TEST ).

69. Enter the anti-theft code for the radio (and navigation system), then enter the radio station presets, and set

the clock.

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

2004 AUTOMATIC TRANSMISSIONS

Servicing - TSX

APPLICATION

TRANSAXLE APPLICATION

IDENTIFICATION

OIL PAN GASKET

For oil pan gasket, see Fig. 1 .

Fig. 1: Identifying Oil Pan Gasket
Courtesy of AMERICAN HONDA MOTOR CO., INC.

TRANSAXLE

Transaxle can be identified by identification tag located on bellhousing, near engine block, or on top of
transaxle, toward outer end. See Fig. 2 .

Application

Transaxle Model

TSX

MCTA

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Servicing - TSX

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Servicing - TSX