Acura TSX / Honda Accord CL. Manual — part 757

Fig. 33: Exploded View Of Strut
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2004 Acura TSX

2004 SUSPENSION Front - TSX

Fig. 34: Removing Damper Fork From Damper
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2004 Acura TSX

2004 SUSPENSION Front - TSX

Fig. 35: Removing Flange Nuts From Top Of Damper
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Disassembly/Inspection

1. Compress strut spring with appropriate available strut spring compressor (A), according to the

manufacturer's instructions. See Fig. 36 . Remove the self-locking nut (B) while holding the damper shaft
(C) with a hex wrench (D). DO NOT compress the spring more than necessary to remove the nut.

2. Release pressure from strut spring compressor, disassemble strut. See Fig. 33 .

3. Reassemble all parts, except for the spring. Compress strut assembly by hand, and check for smooth

operation through a full stroke, both compression and extension. The strut should extend in a smooth,
continuous motion when compression is released. If it does not (no compression or no extension), gas is
leaking, and strut should be replaced. See Fig. 37 .

2004 Acura TSX

2004 SUSPENSION Front - TSX

4. Check for oil leaks, abnormal noises, or binding during these tests.

Fig. 36: Compressing Strut
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2004 Acura TSX

2004 SUSPENSION Front - TSX