Acura TSX / Honda Accord CL. Manual — part 758
Fig. 37: Checking Strut For Leaks
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Reassembly
2004 Acura TSX
2004 SUSPENSION Front - TSX
1. Assemble the damper disassembled parts except for the washer and self-locking nut.
2. Install the damper assembly on the appropriate available strut spring compressor (A), and compress the
spring lightly. See Fig. 38 .
3. Align the bottom of the spring and the stepped part (B) of the lower spring seat.
4. Position the damper mounting base (A) so the stud bolt in it is aligned with aligning tab in the damper
unit. See Fig. 39 .
5. Compress the damper spring. DO NOT compress the spring excessively.
6. Install the washer (A) and a new 10 mm self-locking nut (B). See Fig. 40 . Hold the damper shaft with a
hex wrench, and tighten the 10 mm self-locking nut to specification. See TORQUE
SPECIFICATIONS .
7. Remove the damper assembly from the strut spring compressor.
NOTE:
For exploded view of strut components, see Fig. 33 .
2004 Acura TSX
2004 SUSPENSION Front - TSX
Fig. 38: Installing Damper On Strut Spring Compressor
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2004 Acura TSX
2004 SUSPENSION Front - TSX
Fig. 39: Positioning Strut Unit For Reassembly
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2004 Acura TSX
2004 SUSPENSION Front - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст