Acura TSX / Honda Accord CL. Manual — part 208
Fig. 96: Seating Seal Rings
40. Move the sleeve back and forth several times to make the seal rings snugly fit in the sleeve. Make sure
the seal rings are not twisted.
41. Apply power steering fluid to the surface of the pinion shaft (A). Slide the sleeve (B) onto the pinion
shaft by aligning the locating pin (C) on the inside of the sleeve with the cutout (D) in the shaft. Then
install the NEW snap ring (E) securely in the pinion shaft groove. Be careful not to damage the valve seal
ring when inserting the sleeve.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 97: Sliding The Sleeve Onto The Pinion Shaft
42. Apply power steering fluid to the seal ring lip of the NEW valve oil seal (A), then install the seal in the
valve housing (B) using a hydraulic press and special tools. Install the seal with its grooved side facing
the tool.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 98: Installing The Seal In The Valve Housing
43. Press the roller bearing (C) into the valve housing with a hydraulic press and special tool.
44. Apply vinyl tape (A) to the pinion shaft, then coat the vinyl tape with power steering fluid.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 99: Inserting The Pinion Shaft Into The Valve Housing
45. Insert the pinion shaft into the valve housing (B). Be careful not to damage the valve seal rings (C) and
valve oil seal sealing lip (D).
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст