Acura TSX / Honda Accord CL. Manual — part 278
Fig. 29: Checking For Continuity Between Body Ground & The Appropriate Wheel Sensor +
B & Gnd Terminals Of The VSA Control Unit 47P Connector
6. Disconnect the appropriate wheel sensor 2P connector.
7. Check for continuity between body ground and the appropriate wheel sensor + B and GND terminals of
the VSA control unit 47P connector individually (see Fig. 30 and Fig. 31 ).
Is there continuity?
YES: Repair short to body ground in the wire between the VSA modulator-control unit and
the wheel sensor.
NO: Replace the appropriate wheel sensor (see WHEEL SENSOR REPLACEMENT ).
2004 Acura TSX
2004 BRAKES Vehicle Stability Assist System - TSX
Fig. 30: Wheel Sensor DTC Table
2004 Acura TSX
2004 BRAKES Vehicle Stability Assist System - TSX
Fig. 31: Checking For Continuity Between Body Ground & The Appropriate Wheel Sensor +
B & Gnd Terminals Of The VSA Control Unit 47P Connector
8. Disconnect the appropriate wheel sensor 2P connector.
9. Check for continuity between the appropriate wheel sensor + B and GND terminals of the VSA control
unit 47P connector (see Fig. 32 and Fig. 33 ).
Is there continuity?
YES: Repair short in the wires between the VSA control unit and the wheel sensor.
NO: Go to step 10.
2004 Acura TSX
2004 BRAKES Vehicle Stability Assist System - TSX
Fig. 32: Wheel Sensor DTC Table
2004 Acura TSX
2004 BRAKES Vehicle Stability Assist System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст