Acura TSX / Honda Accord CL. Manual — part 277
Fig. 25: Identifying Vehicle Stability Assist System Connector Terminals
DTC TROUBLESHOOTING
DTC 11, 13, 15, 17: WHEEL SENSOR (OPEN/SHORT TO BODY GROUND/SHORT TO POWER)
1. Disconnect the VSA control unit 47P connector.
2. Start the engine.
3. Measure the voltage between body ground and the appropriate wheel sensor + B and GND terminals of
the VSA control unit 47P connector individually (see Fig. 26 and Fig. 27 ).
Is there 1 V or more?
YES: Repair short to power in the wire between the VSA modulator-control unit and the
2004 Acura TSX
2004 BRAKES Vehicle Stability Assist System - TSX
appropriate wheel sensor.
NO: Go to step 4.
Fig. 26: Wheel Sensor DTC Table
2004 Acura TSX
2004 BRAKES Vehicle Stability Assist System - TSX
Fig. 27: Measuring The Voltage Between Body Ground & The Appropriate Wheel Sensor + B
& Gnd Terminals Of The VSA Control Unit 47P Connector
4. Turn the ignition switch OFF.
5. Check for continuity between body ground and the appropriate wheel sensor + B and GND terminals of
the VSA control unit 47P connector individually (see Fig. 28 and Fig. 29 ).
Is there continuity?
YES: Go to step 6.
NO: Go to step 8 .
2004 Acura TSX
2004 BRAKES Vehicle Stability Assist System - TSX
Fig. 28: Wheel Sensor DTC Table
2004 Acura TSX
2004 BRAKES Vehicle Stability Assist System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст