Acura TSX / Honda Accord CL. Manual — part 796
Fig. 83: Installing The Idler Gear Shaft In The Idler Gear
5. Install the snap ring.
CLUTCH DISASSEMBLY
Special Tools Required
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
z
Clutch spring compressor attachment 07LAE-PX40100
z
Clutch spring compressor attachment 07HAE-PL50101
z
Clutch spring compressor bolt assembly 07GAE-PG40200 or 07GAE-PG4020A
1. Remove the snap ring with a screwdriver.
Fig. 84: Removing The Snap Ring With A Screwdriver
2. Remove the clutch end plate (A), clutch discs (5) (B), clutch flat-plates (5) (C), and waved spring (D)
from the 3rd clutch drum (E).
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Fig. 85: Removing The Clutch End Plate, Clutch Discs (5), Clutch Flat-Plates (5), And Waved
Spring From The 3rd Clutch Drum
3. Remove the clutch end plate (A), clutch discs (5) (B), clutch waved-plates (3) (C), 2.0 mm-thick flat plate
(D), 4.0 mm-thick plate (E), and waved spring (F) from the 2nd clutch drum (G).
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Fig. 86: Removing The Clutch End Plate, Clutch Discs (5), Clutch Waved-Plates (3), 2.0 mm-Thick
Flat Plate, 4.0 mm-Thick Plate, And Waved Spring From The 2nd Clutch Drum
4. Make a reference mark on 2.0 mm-thick flat-plate (D).
5. Remove the clutch end plate (A), clutch discs (B) (5), clutch flat-plates (C) (5), and waved spring (D)
from the 3rd clutch drum (E).
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст