Acura TSX / Honda Accord CL. Manual — part 35
1. Remove the clips (A, B, C), then remove the front bulkhead cover (D).
Fig. 17: Removing The Front Bulkhead Cover
2. Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
3. Remove the clips, then remove the front grille (A). Take care not to drop the clips inside the front
bumper.
NOTE:
z
When prying with a flat-tip screwdriver, wrap it with protective tape to
prevent damage.
z
Take care not to scratch the front bulkhead cover and front grille.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Exterior Trim - TSX
Fig. 18: Removing The Front Grille
4. Install the front grille in the reverse order of removal, and note these items:
z
Replace any damaged clips.
z
Install the hook portions of the front grill into place securely.
FRONT FENDER TRIM REPLACEMENT
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Exterior Trim - TSX
1. Remove the front fender trim (A).
a. Using a clip remover, remove the clip (B) securing the front fender trim and cowl cover (C).
b. Remove the clips (D) from the front bulkhead cover (E).
c. Pull up the side edge of the front bulkhead cover, then pull up the front fender trim to release the
clips (F), and release the hook (G) from the body.
NOTE:
Take care not to scratch the body.
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Exterior Trim - TSX
Fig. 19: Removing Front Fender Trim
2004 Acura TSX
2004 ACCESSORIES & EQUIPMENT Exterior Trim - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст