Acura TSX / Honda Accord CL. Manual — part 34

shown. Make sure there are no wrinkles in the weatherstrip.

4. Check for water leaks.

FUEL FILL DOOR

ADJUSTMENT

1. Slightly loosen the hinge mounting bolts (A).

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Exterior Trim - TSX

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Exterior Trim - TSX

Fig. 14: Adjusting The Fuel Fill Door

2. Adjust the fuel fill door (B) in or out until it's flush with the body, and up or down as necessary to

equalize the gaps.

3. Tighten the hinge mounting bolts.

4. Check that the fuel fill door opens properly and locks securely, and check that the rear of the door is flush

with the body.

5. Apply multipurpose grease to each location indicated by the arrows.

Fig. 15: Applying Multipurpose Grease

6. Apply touch-up paint to the hinge mounting bolts and around the hinges.

EXTERIOR TRIM

HOOD MOLDING REPLACEMENT

1. Remove the nuts (A), and detach the clip (B) by pushing it from the drain hole (C) in the hood, then

remove the hood molding (D). Take care not to scratch the hood.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Exterior Trim - TSX

Fig. 16: Removing The Hood Molding

2. Install the molding in the reverse order of removal, and replace the clip if it's damaged.

FRONT GRILLE REPLACEMENT

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Exterior Trim - TSX