Acura TSX / Honda Accord CL. Manual — part 602
Fig. 45: Measuring Voltage Between Ignition Coil 3P Connector Terminal No. 3 & Body
Ground
32. Turn the ignition switch OFF.
33. Check for continuity between ignition coil 3P connector terminal No. 2 and body ground.
Is there continuity?
YES: Go to step 34.
NO: Repair open in the wire between the ignition coil and G 101, then go to step 63 .
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 46: Checking For Continuity Between Ignition Coil 3P Connector Terminal No. 2 &
Body Ground
34. Turn the ignition switch OFF.
35. Jump the SCS line with the HDS.
36. Disconnect ECM/PCM connector A (31P).
37. Check for continuity between body ground and the appropriate ECM/PCM connector terminal (see Fig.
47 and Fig. 48 ).
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Is there continuity?
YES: Repair short in the wire between the ECM/PCM and the ignition coil, then go to step
63 .
NO: Go to step 63 .
Fig. 47: Checking For Continuity Between Body Ground & The Appropriate ECM/PCM
Connector Terminals
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 48: DTC/Terminal Identification Table
38. Connect the appropriate ignition coil 3P connector terminal No. 1 to body ground with a jumper wire (see
Fig. 49 and Fig. 50 ).
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст