Acura TSX / Honda Accord CL. Manual — part 603
Fig. 49: Connecting The Appropriate Ignition Coil 3P Connector Terminal No. 1 To Body Ground
With A Jumper Wire
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 50: DTC/Terminal Identification Table
39. Check for continuity between body ground and the appropriate ECM/PCM connector terminal (see Fig.
51 and Fig. 52 ).
Is there continuity?
YES: Go to step 40.
NO: Repair open in the wire between the ECM/PCM and the ignition coil, then go to step
63 .
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Fig. 51: Checking For Continuity Between Body Ground & The Appropriate ECM/PCM
Connector Terminals
Fig. 52: DTC/Terminal Identification Table
40. Reconnect the ignition coil 3P connector and ECM/PCM connector A (31P).
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
41. Do an engine compression and a cylinder leakdown test.
Did the engine pass both tests?
YES: Go to step 42.
NO: Repair the engine, then go to step 63 .
42. Do the VTEC rocker arm test (see VTEC ROCKER ARM TEST ).
Did the VTEC rocker arm pass the test?
YES: Go to step 71 .
NO: Repair as necessary, then go to step 63 .
43. Turn the ignition switch OFF.
44. Jump the SCS line with the HDS.
45. Disconnect ECM/PCM connector B (24P).
46. Turn the ignition switch ON (II).
47. Measure voltage between body ground and the appropriate ECM/PCM connector terminal (see Fig. 53
and Fig. 54 ).
Is there battery voltage?
YES: Go to step 57 .
NO: Go to step 48.
2004 Acura TSX
2004 ENGINE PERFORMANCE PGM-FI System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст