Acura TSX / Honda Accord CL. Manual — part 790
Special Tools Required
Bearing separator 07KAF-PS30200
1. Install the special tool on the 4th gear (A). Set a press on the countershaft (B) with putting a spacer (C)
between the press and countershaft, and remove the reverse selector hub (D).
Fig. 64: Removing The Reverse Selector Hub
2. Remove the needle bearing, set ring, 35 x 47 x 7.8 mm collar, and cotters.
3. Set the press on the countershaft (A) with putting a spacer (B) between the press and countershaft, and
remove the 3rd gear (C).
NOTE:
Some reverse selector hubs are not press-fitted, and can be removed
without using the special tool and a press.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Fig. 65: Removing The 3rd Gear
4. Remove the 37 x 41 x 82.8 mm collar, 5th gear, 1st gear, and 2nd gear.
REVERSE SELECTOR HUB AND 3RD GEAR INSTALLATION
Special Tools Required
Driver 40 mm I.D. 07746-0030100
1. Install the 2nd gear, 1st gear, 5th gear, and 37 x 41 x 82.8 mm collar on the countershaft.
2. Slide the 3rd gear (A) over the countershaft, and press it in place with the special tool and a press.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Fig. 66: Pressing The 3rd Gear On The Countershaft
3. Install the cotters, 35 x 47 x 7.8 mm collar, set ring, needle bearing, and 4th gear.
4. Slide the reverse selector hub (A) over the countershaft, then press it in place with the special tool and a
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
press.
NOTE:
Some reverse selector hubs are not press-fitted and can be installed
without using the special tool and a press.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст