Acura TSX / Honda Accord CL. Manual — part 722
Fig. 41: Removing The Steering Wheel Bolt & Steering Wheel From The Steering Column
STEERING WHEEL DISASSEMBLY/REASSEMBLY
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 42: Exploded View Of Steering Wheel Components
STEERING WHEEL INSTALLATION
1. Before installing the steering wheel, make sure the front wheels are aligned straight ahead, then center the
cable reel (A). Do this by first rotating the cable reel clockwise until it stops. Then rotate it
counterclockwise about three full turns. The arrow mark (B) on the cable reel label point should point
straight up.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 43: Centering The Cable Reel
2. Position the two tabs (A) of the turn signal cancelling sleeve (B) as shown. Install the steering wheel on
to the steering column shaft, making sure the steering wheel hub (C) engages the pins (D) of the cable
reel and tabs of the cancelling sleeve. Do not tap on the steering wheel or steering column shaft when
installing the steering wheel.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 44: Positioning The Two Tabs Of The Turn Signal Cancelling Sleeve
3. Install the steering wheel bolt (A) and tighten it to the specified torque. Connect the audio remote,
navigation guide and cruise control set/resume switch connectors (if equipped). Make sure the wire
harness is routed and fastened properly.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст