Acura TSX / Honda Accord CL. Manual — part 720

Fig. 33: Aligning The Bolt Holes In The Cover With The Threaded Holes In The Pump Housing

36. Push in the cam ring (A) from the pump housing cap hole (B) with a flat blade screwdriver, to make sure

the cam ring is fully seated against the outer case.

2004 Acura TSX

2004 STEERING Power Steering System - TSX

Fig. 34: Pushing In The Cam Ring From The Pump Housing Cap Hole

37. Install the pump preload spring (A) in the pump housing.

2004 Acura TSX

2004 STEERING Power Steering System - TSX

Fig. 35: Installing The Pump Preload Spring In The Pump Housing

38. Coat the NEW 12.7 mm O-ring (B) with power steering fluid, and install it on the pump housing cap (C).

39. Install the pump housing cap on the pump housing, and tighten it to specified torque.

40. Install the pressure control valve spring (A) in the pump housing.

2004 Acura TSX

2004 STEERING Power Steering System - TSX

Fig. 36: Installing The Pressure Control Valve Spring In The Pump Housing

41. Coat the pressure control valve (B) with power steering fluid, and install it on the pump housing.

42. Coat the NEW 16.7 mm O-ring (C) with power steering fluid, and install it on the pressure control valve

cap (D).

43. Install the pressure control valve cap on the pump housing, and tighten it to the specified torque.

44. Coat the NEW O-ring (A) with power steering fluid, and install it on the inlet joint (B).

2004 Acura TSX

2004 STEERING Power Steering System - TSX