Acura TSX / Honda Accord CL. Manual — part 921

Fig. 31: Checking The Release Bearing

4. Apply super high temp urea grease (P/N 08798-9002) to the release fork (A), the release fork bolt (B), the

release bearing (C), and the release bearing guide (D) in the shaded areas.

2004 Acura TSX

2004 CLUTCHES TSX

Fig. 32: Applying Super High Temp Urea Grease

5. With the release fork slid between the release bearing pawls, install the release bearing on the mainshaft

while inserting the release fork through the hole in the clutch housing.

6. Align the detent of the release fork with the release fork bolt, then press the release fork over the release

fork bolt squarely.

7. Install the release fork boot (E). Make sure the boot seals around the release fork and clutch housing.

8. Move the release fork (A) right and left to make sure that it fits properly against the release bearing (B)

and that the release bearing slides smoothly.

2004 Acura TSX

2004 CLUTCHES TSX

Fig. 33: Installing The Release Bearing & The Release Fork

2004 Acura TSX

2004 CLUTCHES TSX

2004 AUTOMATIC TRANSMISSIONS

Diagnosis - MCTA 5-Speed

SPECIAL TOOLS

Fig. 1: Special Tools (1 Of 2)

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Diagnosis - MCTA 5-Speed

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Diagnosis - MCTA 5-Speed