Acura TSX / Honda Accord CL. Manual — part 743
Fig. 122: Rotating The Steering Gearbox So The Pinion Shaft Points Upward
6. Continue moving the gearbox toward the passenger's side until the steering gearbox is in position. Make
sure the power steering return line and feed line are routed above the gearbox.
7. Remove the vinyl tape from the pinion shaft, and install the pinion shaft grommet (A). Align the slot in
the pinion shaft grommet with the lug portion (B) on the valve housing.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 123: Installing The Pinion Shaft Grommet
8. Position the cutout (A) on the mounting cushion (B) as shown, and install it on the cylinder of the
gearbox securely.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 124: Installing Mounting Cushion On The Cylinder Of The Gearbox
9. Install the gearbox mounting bracket (C) over the mounting cushion, and loosely install the two flange
bolts.
10. Install the steering stiffener plate (A) and gearbox mounting bolts on the left side of the gearbox, then
tighten them to the specified torque.
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Fig. 125: Installing The Steering Stiffener Plate & Gearbox Mounting Bolts
11. Tighten the flange bolts on the right side of the gearbox to specified torque alternately in two or more
steps.
12. Loosely connect the return line and feed line by hand securely.
13. Install the feed line holder (A) and return hose (B) on the gearbox mounting bracket (C)
2004 Acura TSX
2004 STEERING Power Steering System - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст