Acura TSX / Honda Accord CL. Manual — part 775
Fig. 6: Measuring The Distance Between The Park Pawl Shaft And The Park Lever Roller Pin
3. If the measurement is out of standard, select and install the appropriate park lever stop (A) from the table
below.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Fig. 7: Selecting And Installing The Appropriate Park Lever Stop
Fig. 8: Park Lever Stop Selection Table
4. After replacing the park lever stop, make sure the distance is within tolerance.
IDLER GEAR SHAFT BEARING REPLACEMENT
Special Tools Required
z
Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
z
Driver 07749-0010000
z
Attachment, 52 x 55 mm 07746-0010400
1. Remove the idler gear shaft bearing (A) from the end cover (B) with the special tool.
Fig. 9: Removing The Idler Gear Shaft Bearing From The End Cover
2. Install the new bearing in the end cover with the special tools.
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Fig. 10: Installing The New Bearing In The End Cover
CONTROL SHAFT OIL SEAL REPLACEMENT
Special Tools Required
z
Driver 07749-0010000
z
Attachment, 22 x 24 mm 07746-0010800
1. Remove the oil seal (A) from the end cover (B).
2004 Acura TSX
2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст