Acura CSX. Manual — part 216
*06
06
07
08
13-92
Manual Transmission
6 x 1.0 mm
12 N·m (1.2 kgf·m, 9 lbf·ft)
VSB02C000016
A
B
14 x 1.5 mm
103 N·m
(10.5 kgf·m,
76 lbf·ft)
B
14 x 1.5 mm
103 N·m
(10.5 kgf·m,
76 lbf·ft)
A
B
B
A
6. Install the clutch cover.
7. Install the intermediate shaft (see page 16-27).
8. Install the driveshafts inboard joint (see step 6 on
page 16-21).
9. Support the front subframe with the subframe
adapter (VSB02C000016) and a jack.
10. Install the front subframe (A). Loosely install new
subframe mounting bolts (B).
11. Align the front subframe reference marks (A) to the
body (B), as noted during removal. Tighten the
front subframe mounting bolts to the specified
torque.
Replace.
Replace.
08/08/21 14:47:26 61SNR030_130_0094
09
10
01
12
13
13-93
14 x 1.5 mm
88 N·m
(9.0 kgf·m,
65 lbf·ft)
12 x 1.25 mm
74 N·m
(7.5 kgf·m,
55 lbf·ft)
A
A
12 x 1.25 mm
64 N·m
(6.5 kgf·m,
47 lbf·ft)
10 x 1.25 mm
54 N·m
(5.5 kgf·m,
40 lbf·ft)
10 x 1.25 mm
59 N·m
(6.0 kgf·m,
43 lbf·ft)
A
B
12. Install a new lower torque rod bracket mounting
bolt.
13. Install the front engine mount bracket (A) on the
transmission and the engine with new bolts.
14. Loosely tighten a new front engine mount bracket
mounting bolt (A), then attach the lower radiator
hose to the front engine mount bracket.
15. Install new middle subframe mounting bolts.
16. Install the steering gearbox stiffener plate (A) and
the harness clip (B).
Replace.
Replace.
Replace.
Replace.
08/08/21 14:47:27 61SNR030_130_0095
14
15
*02
*03
13-94
Manual Transmission
10 x 1.25 mm
54 N·m
(5.5 kgf·m, 40 lbf·ft)
10 x 1.25 mm
59 N·m
(6.0 kgf·m, 43 lbf·ft)
10 x 1.25 mm
38 N·m
(3.9 kgf·m, 28 lbf·ft)
A
B
C
12 x 1.25 mm
74 N·m
(7.5 kgf·m,
55 lbf·ft)
12 x 1.25 mm
74 N·m
(7.5 kgf·m, 55 lbf·ft)
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
12 x 1.25 mm
74 N·m
(7.5 kgf·m, 55 lbf·ft)
A
B
A
14 x 1.5 mm
93 N·m
(9.5 kgf·m,
69 lbf·ft)
A
12 x 1.25 mm
64 N·m (6.5 kgf·m, 47 lbf·ft)
17. Install the stiffener plate (A) and the mounting
bracket (B). Connect the exhaust mounting rubber
(C).
18. Connect the lower ball joint and the lower arm (see
step 8 on page 16-21).
19. Lower the vehicle on the lift.
20. Install the transmission mount bracket (A), and
connect the ground cable (B).
21. Raise the vehicle on the lift.
22. Loosen and retighten the lower torque rod
mounting bolt (A).
23. Refill the transmission with the recommended
transmission fluid (see page 13-82).
24. Lower the vehicle on the lift.
25. Tighten the upper torque rod mounting bolt (A).
26. Raise the vehicle on the lift.
Replace.
Replace.
Replace.
08/08/21 14:47:28 61SNR030_130_0096
*04
17
05
20
13-95
A
12 x 1.25 mm
64 N·m
(6.5 kgf·m,
47 lbf·ft)
10 x 1.25 mm
38 N·m
(3.9 kgf·m,
28 lbf·ft)
A
B
A
27. Tighten the front mount mounting bolt (A).
28. Install the splash shield.
29. Lower the vehicle on the lift
30. Remove the engine support hanger and the engine
hanger adapter from the engine.
31. Install the engine control module (ECM) bracket (A),
then install the clutch pipe clamp (B).
32. Install the under-food fuse/relay box (A) on the
under-hood fuse/relay bracket.
08/08/21 14:47:29 61SNR030_130_0097
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст